W-605
Videograbadoras
Contenido
Guía de servicio
Precauciones
Información de referencia
Especificaciones del producto
Desemsamble y reensamble
Ajuste y alineamiento
Vista explotada
Lista de partes de reemplazo
Diagrama a bloques
Diagramas PCB (Placa de Circuito Impreso)
Diagramas esquemáticos
SERVICE MANUAL
FILE NO. 120-200010
VIDEO CASSETTE RECORDER
W-605
PRINTED IN KOREA. APR, 2000
W-605
4/22/00 8:57 AM
Page 1
TOTAL CONTENTS
Service Guide
1. Precautions
2. Reference Information
3. Product Specifications
4. Disassembly and Reassembly
5. Alignment and Adjustment
6. Exploded View
7. Replacement Parts List
8. Block Diagram
9. PCB Diagrams
10. Schematic Diagrams
Toshiba
I
SERVICE GUIDE
Assy Cylinder & TM-Block are used for this model, as shown below.
Assy-Cylinder
How to identify the Assy-Cylinder
ALPS Cylinder
SEM Cylinder
CONNECTOR ; Pin 7 or Pin 5
CONNECTOR ; Pin 5
Fig. 1
1) Three kinds of the Assy-Cylinder as shown below.
OE ALPS Cylinder
´ SEM Cylinder
Connector ; Pin 7
Connector ; Pin 5
Connector ; Pin 5
2) When replacing the Assy-Cylinder, be sure to replace only "SEM Cylinder".
The only part-no of "SEM Cylinder" is shown in the "CH7. Replacement Parts List" of Service Manual.
3) When changing from ALPS (connector ; pin 7) cylinder to SEM (connector ; pin 5) cylinder.
- Change CN605 (Connector ; pin 7
pin 5)
- Change CN605B (Cable-Flat ; pin 7
pin 5)
4) After replacing the "SEM Cylinder", use type "C, D, G, H" optional for "NVRAM Option Setting". (See page 5-9)
The Maker of Assy Cylinder
1
2
ALPS
SEM
Two kinds of TM-Block
1
2
SIF available
Not SIF availablea
II
Toshiba
TM-BLOCK
1) Two kinds of the TM-Blovk
OE SIF available
´ Not SIF available
2) How to identify TM-Block ; See page 5-10 (Fig. 5-20)
- In case there is VR501 ; Not SIF available
- In case there is no VR501 ; SIF available
3) When replacing the TM-Block as a service parts, be sure to replace only the TM-Block which is SIF available.
The only part-no of "SIF available" is shown in the "CH7. Replacement Parts List" of Service Manual.
4) After replacing "TM-Block", use type "B, D, F, H" optional for "NVRAM Option Setting" regardless of VR501. (See page 5-9)