ORDER NO. AD0303062C0
A2
Turntable System
SL-1210M5GE
SL-1210M5GEB
SL-1210M5GGN
SL-1210M5GPP
Colour
Black Type: SL-1210M5G
SPECIFICATIONS
Specifications
1
TURNTABLE SECTION
Type:
Quartz direct drive
Manual turntable
Drive method:
Direct drive
Motor:
Brushless DC motor
Turntable platter:
Aluminum diecast
Diameter 33.2cm (13-5/
64")
Mass 1.7kg (3.74lb.)
Turntable speeds:
33-1/3 r/min, 45 r/min
Variable range pitch:
±8%, ±16% (two settings)
Starting torque:
1.5kg-cm (1.3lb-in)
Build-up characteristics:
0.7s. from standstill to 33-
1/3 r/min
Braking system:
Electronic brake
Wow and flutter:
0.01% WRMS*
0.025% WRMS (JIS C5521)
±0.035% peak(IEC 98A
Weighted)
Rumble:
-56dB (IEC 98A
Unweighted)
-78dB (IEC 98A Weighted)
*This rating refers to turntable assembly alone,
excluding effects of record, cartridge or tonearm,
but including platter. Measured by obtaining signal
from built-in frequency generator of motor assembly.
TONEARM SECTION
Type:
Universal
Effective length:
230mm (9-1/16")
Arm height adjustment
range:
0-6 mm
Overhang:
15mm (19/32")
Effective mass:
12g (without cartridge)
Offset angle:
22°
Friction:
Less than 7 mg (lateral,
vertical)
Tracking error angle:
Within 2°32' [at the outer
groove of 30cm (12")
record]
Within 0°32' [at the inner
groove of 30cm (12")
record]
2
Stylus pressure
adjustment range:
0-4g
Applicable cartridge
weight range:
3.5-13g
11-20.5g (including
headshell)
(with auxiliary weight);
9.5-13g
17-20.5g (including
headshell)
(with shell weight);
3.5-6.5g
11-14g (including
headshell)
Headshell weight:
7.5g
GENERAL
Power supply:
AC110-127V/220-240V,
50Hz
(E,EB,GN)
AC120V, 60Hz (PP)
Power consumption:
15W (E,EB,GN)
14.5W (PP)
Dimensions (W×H×D):
45.3×17.2×35.5cm
(17-27/32"×6-25/32"×13-31
/32")
Mass:
11.7kg (25.74lb)
Note:
Specifications are subject to change without notice.
Mass and dimensions are approximate.
1
1. Accessories
3
- Disc slip sheet set (RGS0005Z-1)...1pc.
- Disc slip sheet
- Transparent sheet
- Auxiliary weight (SFPWG17202)...1pc.
- EP record adaptor (SFWE010A)...1pc.
- Shell weight (SFPZB3501)...1pc.
- Overhang gauge (SFK0135-01)...1pc.
4
- Nuts (RHN26003)...2pcs.
- Screws(short) (SFCZV8801-1)...2pcs.
- Screws(long) (SFPEV9801-1)...2pcs.
- Washers(SFPEW9601)...2pcs.
- Sticker (RQLC0142-1)...1pc.
2. Controls
3. Turntable system pitch adj. slider replacement
instructions.
5