Before connecting, operating or adjusting this
product, please read these instructions completely.
Please save this manual.
Operating Instructions
SL-1200M3D
RQT4912-2P
Turntable System
P PC
2
RQT4912
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instruc-
tions carefully.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of suffi-
cient magnitude to constitute a risk of electric shock
to persons.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the ap-
pliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The following mark and symbols are located on bottom of the unit.
Table of contents
Supplied accessories ....................................................... 2
IMPORTANT SAFETY INSTRUCTIONS ........................... 3
Features ............................................................................. 4
Controls ............................................................................. 4
Preparation of the cartridge ............................................ 4
Putting the player together .............................................. 5
Connections and installation .......................................... 6
Connecting the stereo cords and AC power cord ....................... 6
Connection to the Audio Mixer (not included) ............................. 6
Installation .................................................................................... 6
Preparatory adjustments ................................................. 7
Horizontal balance and stylus pressure ...................................... 7
Anti-skating .................................................................................. 8
Tone arm height ........................................................................... 8
Fit the dust cover ......................................................................... 8
Playing records ................................................................. 9
Adjustments while using the unit ................................. 10
Pitch control ............................................................................... 10
Armlift height .............................................................................. 10
Maintenance .................................................................... 11
Product service ............................................................... 11
Troubleshooting guide ........................................ Back cover
Technical specifications ..................................... Back cover
Supplied accessories
Please check and identify the supplied ac-
cessories.
Use numbers indicated in parentheses when
asking for replacements parts.
(Only for U.S.A.)
To order accessories contact 1-800-332-5368 or web site
(http: //www.panasonic.com).
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT
EXPOSE
THIS
APPLIANCE
TO
RAIN,
SPLASHING, DRIPPING OR MOISTURE.
CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH
WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
The model number and serial number of this product can
be found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
MODEL NUMBER
SL-1200M3D
SERIAL NUMBER
Turntable .................. 1pc.
(SFTE172-01Z)
Turntable mat .......... 1pc.
(RGS0008)
Disc slip sheet set
(RGS0005Z) .................. 1
·Disc slip sheet
·Transparent sheet
Dust cover ............... 1pc.
(SFAD122-01A)
Shell with stylus weight
(SFPCC31005K) ...... 1pc.
A cartridge is not included.
Balance weight ....... 1pc.
(SFPWG17201K)
Auxiliary weight ...... 1pc.
(SFPWG17202)
EP record adaptor
(SFWE010) ............... 1pc.
Shell weight ............. 1pc.
(SFPZB3501)
Overhang gauge ..... 1pc.
(SFK0135-01)
Screw set for cartridge
....................................... 1
·Nuts(RHN26003)
·Screws-short(SFCZV8801)
·Screws-long(SFPEV9801)
·Washers(SFPEW9601)
3
RQT4912
CAUTION:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If
this
equipment
does
cause
harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the
following measures:
¡Reorient or relocate the receiving antenna.
¡Increase the separation between the equipment and re-
ceiver.
¡Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
¡Consult the dealer or an experienced radio/TV technician
for help.
Any
unauthorized
changes
or
modifications
to
this
equipment would void the user's authority to operate this
device.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety
instructions listed below. Keep these operating instructions handy for future reference.
1)
Read these instructions.
2)
Keep these instructions.
3)
Heed all warnings.
4)
Follow all instructions.
5)
Do not use this apparatus near water.
6)
Clean only with dry cloth.
7)
Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8)
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9)
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only
use
attachments/accessories
specified
by
the
manufacturer.
12) Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution
when
moving
the
cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
4
RQT4912
Features
A masterpiece amongst turntables with a worldwide repu-
tation.
Pitch control reset button
·Pitch can be instantly reset to the rated speed (33 1/3 or 45 rpm).
Highly accurate turntable speed maintained continuously
with a quartz pitch control
·The pitch can be varied between -8 and +8%, with accuracy main-
tained throughout the range.
The direct drive produces high torque
·Wow and flutter below 0.01%. Starting torque of 1.5 kg/cm en-
abling the turntable to reach 33 1/3 rpm in 0.7 seconds.
·Fully electric braking system.
Tone arm with gimbal suspension
·The tone arm can be finely adjusted in a range of 6 millimeters
with the lockable height control.
Anti-vibration design with 3 layer cabinet construction
and large insulating legs.
Pop-up stylus light.
Controls
No.
Name
Reference page(s)
EP record adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Turntable base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Turntable mat (Or disc slip sheet) . . . . . . . . . . . . . . 5
Center spindle
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Turntable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Strobe lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Power switch (power ) . . . . . . . . . . . . . . . . . . . . . . . . 9
Strobe illuminator/pilot lamp . . . . . . . . . . . . . . . . . 10
Start/stop button (start - stop ) . . . . . . . . . . . . . . . . . 9
Speed select buttons (33, 45) . . . . . . . . . . . . . . . . . . 9
Arm-height control . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Shell stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Balance weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Stylus pressure control . . . . . . . . . . . . . . . . . . . . . . . 7
Arm lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Anti-skating control . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Cue lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Arm clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Arm rest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Tone arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
LED indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Pitch control (Pitch adj. ) . . . . . . . . . . . . . . . . . . . . . 10
Locking nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Reset button (reset ) . . . . . . . . . . . . . . . . . . . . . . . . 10
Head shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Stylus light switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Stylus light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Preparation of the cartridge
Attach a cartridge (not included).
Follow the cartridge's instructions to correctly attach it to the
head shell.
·Use the included shell weight 1 when using a light cartridge
(3.5 to 6.5 grams).
·Use the stylus weight
2 to increase stylus pressure (
page 7). Leave it off until stylus pressure has been adjusted.
Adjust the overhang.
Fit the included overhang gauge to the head shell. Adjust the
overhang and facing of the cartridge and tighten the screws.
· Line the point of the stylus up with the end of the gauge.
·The cartridge should be parallel on the shell head.
52mm
+8
+8
6
4
2
+8
2
4
6
-8
-8
(Stylus weight
2)
Screw for cartridge
Shell with stylus
weight
Lead wire
Terminal
Nut
(Shell
weight
1)
Stylus
Screw for cartridge
Stylus tip
Overhang
gauge
YES
NO
NO
5
RQT4912
Putting the player together
Put the player together in the following order.
·Do not connect the AC power cord until set up is complete.
·Leave the dust cover off until set up and adjustments are com-
plete.
Fit the turntable
and turntable mat
.
Put the turntable on the center spindle and then lay the mat on
top.
·Be very careful when putting the turntable on the main unit.
The magnet on the bottom of the turntable is finely adjusted
and sharp contact can cause it to move and lead to poor op-
eration. Ensure the magnet remains free from dust and iron
particles.
·Do not adjust the screws attaching the magnet to the turn-
table. The rated performance of the unit cannot be guaran-
teed if the magnet is moved.
Attach the head shell
.
Fit the head shell into the tone arm, keep it horizontal and tighten
the locking nut.
Attach the balance weight
to the rear of the
tone arm.
If the cartridge weighs between 10 and 13 grams, attach the
included auxiliary weight
to the main balance weight.
When the player is to be used for scratch play
Use the disc slip sheet
instead of the turntable mat. This enables
the record to be easily moved during play.
·Top (printed side): Lay the record on this side.
·Bottom: Slippery side.
For a different kind of slip
Put the transparent sheet
under the disc slip sheet.
Locking nut
Magnet
Securing
screws