ORDER NO. MD0006110C1
B12
Speaker System
SB-CSS140
Colour
(K)... Black Type
Area
(PC)... Canada
SPECIFICATIONS
1
Type
2 way, 2 speaker system
Bass-reflex type
Speaker (s)
Woofer
10 cm cone type x 1
Tweeter
6 cm cone type x 1
Impedance
8
Input power
Music
200 W
DIN
100 W
Sound pressure level
81 dB/W (1.0 m)
Crossover frequency
3.5 kHz
Frequency range
65 Hz - 22 kHz (at -16 dB)
95 Hz - 20 kHz (at -10 dB)
Dimensions (W x H x D)
120 x 208 x 163 mm
(4-3/4" x 8-3/16" x 6-7/16")
Mass
1.8kg (4 lb.)
Notes :
Specifications are subject to change without notice.
Mass and dimensions are approximate.
1
1. Connection of the
Speaker Cables
- Be sure to connect speaker cables before connecting the AC power supply cord.
- The load impedance of any speaker used with this unit must be 8 .
- Be sure to connect the cable from the right speaker to the right terminal and the
cable from the left speaker to the left terminal.
1. Strip off the outer covering, and twist the center conductor. Make sure the bare
ends of the wires are not unravelled. (If they are, twist them tight again.)
2. Insert the wire to the rear panel of the unit and close the lever.
2
Notes :
- To prevent damage to circuitry, never short-circuit positive (+) and negative (-)
speaker wires.
- Be sure to connect only positive (red) wires to positive (+) terminals and negative
(black) wires to negative (-) terminals.
2. Cabinet Parts Location
3
3. Replacement Parts List
Notes :
- Important safety notice :
Components identified by
mark have special characteristics important for safety.
Furthermore, special parts which have purposes of fireretardant (resistors), high-
quality sound (capacitors), low noise (resistors), etc are used.
When replacing any of these components, be sure to use only manufacturer's
specified parts shown in the parts list.
- [M] indicates in the Remarks columns indicates parts supplied by MESA.
4
Ref. No.
Part No.
Part Name & Description
Remarks
CABINET AND CHASSIS
1
RYB0237B
NET FRAME ASS'Y
[M]
2
RFKABAFC140K SPEAKER
[M]
3
REE0970A
SPEAKER WIRES
[M]
PACKING MATERIALS
P1
RPN1264
POLYFOAM
[M]
P2
RPF0297
MIRAMAT
[M]
P3
RPG5066
CARTON BOX
[M]
ACCESSORIES
A1
RFA0631A-K
LEG CUSHION
[M]
4. Packaging
5