D00942621A
Super Audio CD/CD Player
Owner's Manual .................... 2
Manuel du Propriétaire ........... 27
Bedienungsanleitung.............. 51
X-01 D2
2
CAUTION
<
DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO
EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS
ARE WITHIN!
<
IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT,
CONTACT TEAC FOR A SERVICE REFERRAL. DO NOT USE THE
PRODUCT UNTIL IT HAS BEEN REPAIRED.
<
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
· Reorient or relocate the equipment and/or the receiving
antenna.
· Increase the separation between the equipment and
receiver.
· Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Changes or modifications to this equipments not expressly
approved by TEAC CORPORATION for compliance will void the
user's warranty.
For U.S.A.
<
Do not expose this apparatus to drips or splashes.
<
Do not place any objects filled with liquids, such as vases, on
the apparatus.
<
Do not install this apparatus in a confined space such as a
book case or similar unit.
<
The apparatus draws nominal non-operating power from the
AC outlet with its POWER switch in the off position.
<
The apparatus should be located close enough to the AC
outlet so that you can easily grasp the power cord plug at any
time.
<
An apparatus with Class ! construction shall be connected to
an AC outlet with a protective grounding connection.
<
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
3
ENGLISH
For U.S.A.
Contents
Thank you for choosing Esoteric. Read this manual
carefully to get the best performance from this unit.
This product has been designed and manufactured according to
FDA regulations "title 21, CFR, chapter 1, subchapter J, based on
the Radiation Control for Health and Safety Act of 1968", and is
classified as class 1 laser product. There is not hazardous invisible
laser radiation during operation because invisible laser radiation
emitted inside of this product is completely confined in the
protective housings.
The label required in this regulation is shown .
For European customers
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol
is attached to a product it means the
product is covered by the European
Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the
local authorities.
3. The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and
human health.
4. For more detailed information about disposal of your old
appliance, please contact your city office, waste disposal
service or the shop where you purchased the product.
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Restoring factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Remote Control Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Front panel features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Understanding the remote control unit . . . . . . . . . . . . . . . . . . 11
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Skipping playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Selecting a track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Fast scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Selecting the playback area. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Programmed playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Display dimming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Repeat mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Changing the display mode . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Setting the Word sync, DAC, priority playback area,
and i.LINK output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Settings (introduction). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Setup Menu Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Analog output (Analog Out) . . . . . . . . . . . . . . . . . . . . . . . 21
Digital output (DigitalOut) . . . . . . . . . . . . . . . . . . . . . . . . . 21
CD Direct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Speaker Size (SP Size) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Speaker distance (Distance) . . . . . . . . . . . . . . . . . . . . . . . . 23
Speaker levels (SP Level) . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Test tone length (Test tone) . . . . . . . . . . . . . . . . . . . . . . . . 23
i.LINK (IEEE 1394) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Optical pickup :
Type
: SLD6163RL-G
Manufacturer : SONY CORPORATION
Laser output : Less than 1mW on the objective lens
Wavelength : 785±15 nm (CD)
655±10 nm (Super Audio CD)
The latest VRDS mechanism for Super Audio CD (Specially
developed ball bearings for the optimum VRDS
mechanism.)
The VRDS mechanism securely clamps the disc to the
turntable whose diameter is exactly the same as that of the
disc. This system completely eliminates vibration inherent to
removable media and unwanted vibrations generated by the
mechanical systems. Also, this mechanism clamps the disc at a
slight inclination so as to compensate for warping or
deformation improving the accuracy of the optical axes of
both the laser pickup and the pit surface of the disc. This is
effective in reducing errors in reading the disc data as well as
in preventing timing errors from erratic data acquisition
timing.
To achieve the high-speed rotation with superior stability that
is required of a Super Audio CD player, the X-01 D2 is
equipped with a duralumin turntable. A specially developed
processing technology was used to enable high-precision
forming of this lightweight material normally used in building
aircraft.
In a joint development project with NSK Ltd., we developed
proprietary, highly precise ball bearings for the VRDS
mechanism. Rolling elements made from precisely machined
ceramic balls provide ultra smooth rotation. The application of
a pre-load to the ball bearing pair ensures a high rigidity and
precise rotation not present in conventional bearings but
necessary for handling the wide rotational range from normal
CD to Super Audio CD playback.
A massive 20mm-thick, SS400 steel bridge supports the
mechanism to control vibrations produced by turntable
rotation.
Coreless motor with neodymium magnets
A newly-developed three-phase brushless spindle motor
provides the fast and accurate turntable rotation required for
Super Audio CD playback. This, and the fixing of the
turntable together with the use of precision ball bearings,
eliminate irregular rotation and vibration.
Research has shown that neodymium is the optimum
magnetic material for this application. Neodymium absorbs
changes to the motor's electric power supply, and exerts
minimal influence on the audio sections of the unit.
Constant-angle optical pickup mounted on a sled with
feedback-monitored speed control
By mounting the pickup on a sled whose axis is rigid, the
pickup lens is maintained at a constant angle and the laser
beam, and hence the optical axis, is maintained in an accurate
vertical orientation. An Esoteric original three-phase brushless
motor with Hall element detection drives the sled, and the
speed of the sled is monitored and used to control the sled
itself in a servo feedback operation, meaning the sled is highly
responsive and smooth in its operation.
4
Sturdy, rigid chassis with triple-point pinpoint foot
support
The unit is constructed with a 5mm thick robust steel base
plate, and is divided into three logical sections, thereby
reducing interference between components of the unit.
Highly rigid mounts are used for the VDRS disc mechanism.
To eliminate vibration, three solid (tool steel) feet support the
unit and isolate it mechanically.
Unsurpassed features
Full functionality and performance suitable for the latest
Super Audio CD player have been realized.
· A power transformer that incorporates a high-efficiency R-
Core digital transformer and another transformer for analog.
Also, the power circuits are separated for digital and analog
circuits for each.
· The front 2-channel audio board is mounted with the right
channel in one board and the left channel in another board.
· Super Audio CD 5.1 channel sound output is possible.
· i.LINK connection is possible. (Flow rate control compatible.)
Audio DACs
The DSD DAC for Super Audio CD playback and the multi-bit
DAC for CD playback are each mounted in the front 2-
channel.
A bi-directional converter circuit, capable of handling both
DSD and PCM data, is also mounted so the user can fully
enjoy the characteristics of both, regardless of the type of
disc.
The conversion of CD PCM data to DSD, or Super Audio CD
DSD data to PCM, allows the best possible playback of the
DAC characteristics of both types of data.
DSD DAC and multi-bit DAC each employ one pair of +
(positive) Output and - (negative) Output for 1-channel (Total
output: 4), and use addition and subtraction of them to
achieve high capacity D/A conversion.
Word synchronization
A master word clock from a high-quality DA converter or
master clock generator can be used for clock synchronization,
resulting in the almost complete elimination of jitter.
Using a high-quality clock signal provided by an external DA
converter such as the Esoteric G-0/G-0s provides optimum
audio quality.
Shutter isolates the mechanism from external influences
The tray opening and closing mechanism is equipped with a
shutter for greater precision and to eliminate adverse effects
from external sound pressure and vibrations on mechanical
units. When closed, the shutter mechanism is mechanically
secured to the front panel to prevent it from moving.
Brushed aluminum finish exemplifies the quality of
construction
The front, side and top panels are constructed of thick
brushed aluminum. The high-quality luxurious finish matches
the overall attention to the finest possible quality, shown in
such details as the illuminated surrounds to the control
buttons and the milled aluminum disc tray.
Features
5
ENGLISH
What's in the box
Please confirm that the following accessories are in the box
when you open it.
Remote control unit x 1
Batteries (AA, R6, SUM-3) x 2
Felt sheet x 3
Power cord x 1
Owner's manual x 1
Warranty card x 1
Conventions about This Manual
<
Instructions in this manual describe the controls on the
remote control. You can also use the buttons on the front
panel if they have the same or similar names as those on the
remote.
<
The types of functions and operations that can be used for a
particular disc vary depending on the features of that disc. In
some cases, these functions and operations may differ from
the descriptions given in this Owner's Manual.
<
The drawings used in this Owner's Manual are purely for the
purposes of explanation.
Read this before operation
<
As the unit may become warm during operation, always leave
sufficient space around the unit for ventilation.
<
The voltage supplied to the unit should match the voltage as
printed on the rear panel. If you are in any doubt regarding
this matter, consult an electrician.
<
Choose the installation location of your unit carefully. Avoid
placing it in direct sunlight or close to a source of heat. Also
avoid locations subject to vibrations and excessive dust, heat,
cold or moisture.
<
Do not place the unit on the amplifier/receiver.
<
Do not open the cabinet as this might result in damage to the
circuitry or electrical shock. If a foreign object should get into
the unit, contact your dealer or service company.
<
When removing the power plug from the wall outlet, always
pull directly on the plug, never yank the cord.
<
To keep the laser pickup clean, do not touch it, and always
close the disc tray.
<
Do not attempt to clean the unit with chemical solvents as
this might damage the finish. Use a clean, dry cloth.
<
Keep this manual in a safe place for future reference.
DO NOT MOVE THE UNIT DURING PLAYBACK
During playback, the disc rotates at high speed. Do NOT lift or
move the unit during playback. Doing so may damage the
disc or the unit.
WHEN MOVING THIS UNIT
When changing places of installation or packing the unit for
moving, be sure to remove the disc and return the disc tray to
its closed position in the player. Then, press the power switch
to turn the power off, and disconnect the power cord.
Moving this unit with the disc loaded may result in damage to
this unit.
Before Use
Placement of the unit
High-quality hardened tool steel is used for the pin-point feet,
securely attached to the bottom of the player. Although the
cover feet may appear loose, the weight of the unit causes
them to be firm and secure, and the design effectively damps
and reduces vibration.
<
Be careful to avoid injury when moving the unit, on account
of its weight. Get someone to help you if necessary.
<
To protect floors, etc. you may stick the felt supplied with the
unit to the bottom of the cover feet.
Pin-point foot
Bottom plate
of the unit
Steel foot
Cover foot retaining screws
Cover foot
Beware of condensation
When the unit (or a disc) is moved from a cold to a warm
place, or used after a sudden temperature change, there is a
danger of condensation; vapor in the air could condense on
the internal mechanism, making correct operation impossible.
To prevent this, or if this occurs, leave the unit for one or two
hours with the power turned on. Then the unit will stabilize at
the temperature of its surroundings.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth or
use diluted neutral cleaning liquid. Be sure to remove any
fluid completely. Do not use thinner, benzine or alcohol as
they may damage the surface of the unit.
"Super Audio CD" is a registered trademark.
"DSD" is a registered trademark.
The i.LINK logo is a trademark of Sony Corporation, registered
in the U.S. and other countries.