TEAC SLD80 - Owner's Manual Immediate Download

OWNER'S MANUAL

MANUEL DU PROPRIETAIRE

9A08892000

SL-D80

AM/FM STEREO RADIO CD-PLAYER WITH DIGITAL CLOCK

Thanks for buying a TEAC. Read this manual

carefully to get the best performance from

this unit.

Nous vous remercions pour l'achat d'un

appareil TEAC. Lire ce manuel avec

attention pour obtenir les meilleures

performances possibles de cet appareil.

Before Use .................................................... 4

Compact Disc ............................................... 5

Name of Each Control................................. 6

Playing a CD ............................................... 10

Programmed Playback ............................. 12

Repeat Playback ........................................ 14

Shuffle Playback ........................................ 15

TUNER

Tuning .......................................................... 15

Sleep Timer................................................. 16

Clock Adjustment....................................... 16

Timer .............................................................17

Troubleshooting ......................................... 18

Specifications ............................................ 19

Avant Utilisation........................................... 4

Disques Compacts....................................... 5

Nomenclature .............................................. 8

Lecture du CD............................................. 10

Lecture programmée ................................ 12

Lecture répétitive ...................................... 14

Lecture aléatoire ....................................... 15

TUNER

Syntonisateur ............................................. 15

Minuterie sommeil..................................... 16

Réglage de l'horloge ................................. 16

Minuterie..................................................... 17

Guide de dépannage................................. 18

Spécifications ............................................ 19

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

R THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT

OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE

PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO

CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

AC POWER CORD CONNECTION

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO

WIDE SLOT, FULLY INSERT.

CORDE DE CONNEXION CA

ATTENTION:

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME

PLUS

LARGE

FICHE

DANS

BORNE

CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND.

For CANADA

Pour le CANADA

Optical pickup :

Type

KSM-213CM

Manufacturer :

SONY Corporation

Laser output

Less than 0.5 mW on the objective lens

Wavelength

770 - 795 nm

CAUTION

< DO NOT REMOVE THE PROTECTIVE HOUSING USING

SCREWDRIVER.

< USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

< IF THIS PRODUCT DEVELOPS TROUBLE, MAKE A CONTACT

WITH OUR SERVICEMAN, AND DO NOT USE THE PRODUCT IN A

TROUBLED STATE.

TO THE USER

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against interference in a residential area. This device generates and uses radio

frequency energy and if not installed and used in accordance with the instructions, it may cause interference to radio or TV reception. If

this unit does cause interference with TV or radio reception you can try to correct the interference by one or more of the following

measures :

a) Reorient or relocate the receiving antenna.

b) Increase the separation between the equipment and the receiver.

c) Plug the equipment into a different outlet so that it is not on the same circuit as the receiver. If necessary, consult the dealer or an

experienced radio/TV technician for additional suggestions.

CAUTION

Changes or modifications to this equipment not expressly approved by TEAC CORPORATION for compliance could void the user's authority

to operate this equipment.

For U.S.A.

Important Safety Instructions

This product has been designed and manufactured according to

FDA regulations "title 21, CFR, chapter 1, subchapter J, based on the

Radiation Control for Health and Safety Act of 1968", and is

classified as class 1 laser product. There is not hazardous invisible

laser radiation during operation because invisible laser radiation

emitted inside of this product is completely confined in the

protective housings.

The label required in this regulation is shown

For U.S.A.

CAUTION

< Read all of these Instructions.

< Save these Instructions for later use.

< Follow all Warnings and Instructions marked on the audio equipment.

1) Read Instructions -- All the safety and operating instructions should

be read before the product is operated.

2) Retain Instructions -- The safety and operating instructions should

be retained for future reference.

3) Heed Warnings -- All warnings on the product and in the operating

instructions should be adhered to.

4) Follow Instructions -- All operating and use instructions should be

followed.

5) Cleaning -- Unplug this product from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

6) Attachments -- Do not use attachments not recommended by the

product manufacturer as they may cause hazards.

7) Water and Moisture -- Do not use this product near water -- for

example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a

wet basement; or near a swimming pool; and the like.

8) Accessories -- Do not place this product on an unstable cart, stand,

tripod, bracket, or table. The product may fall, causing serious injury to

a child or adult, and serious damage to the product. Use only with a

cart, stand, tripod, bracket, or table recommended by the manufacturer,

or sold with the product. Any mounting of the product should follow the

manufacturer's instructions, and should use a mounting accessory

recommended by the manufacturer.

9) A product and cart combination should be moved

with care. Quick stops, excessive force, and uneven

surfaces may cause the product and cart combination

to overturn.

10) Ventilation -- Slots and openings in the cabinet

are provided for ventilation and to ensure reliable operation of the

product and to protect it from overheating, and these openings must not

be blocked or covered. The openings should never be blocked by

placing the product on a bed, sofa, rug, or other similar surface. This

product should not be placed in a built-in installation such as a

bookcase or rack unless proper ventilation is provided or the

manufacturer's instructions have been adhered to.

11) Power Sources -- This product should be operated only from the

type of power source indicated on the marking label. If you are not sure

of the type of power supply to your home, consult your product dealer

or local power company. For products intended to operate from battery

power, or other sources, refer to the operating instructions.

12) Grounding or Polarization -- This product may be equipped with a

polarized alternating-current line plug (a plug having one blade wider

than the other). This plug will fit into the power outlet only one way. This

is a safety feature. If you are unable to insert the plug fully into the

outlet, try reversing the plug. If the plug should still fail to fit, contact

your electrician to replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

13) Power-Cord Protection -- Power-supply cords should be routed so

that they are not likely to be walked on or pinched by items placed upon

or against them, paying particular attention to cords at plugs,

convenience receptacles, and the point where they exit from the

product.

14) Outdoor Antenna Grounding -- If an outside antenna or

cable

system is connected to the product, be sure the antenna or cable

system is grounded so as to provide some protection against voltage

surges and built-up static charges. Article 810 of the National Electrical

Code, ANSI/NFPA 70, provides information with regard to proper

grounding of the mast and supporting structure, grounding of the lead-

in wire to an antenna discharge unit, size of grounding conductors,

location of antenna-discharge unit, connection to grounding electrodes,

and requirements for the grounding electrode.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to

Section 820-40 of the NEC which provides guidelines for proper

grounding and, in particular, specifies that the cable ground shall be

connected to the grounding system of the building, as close to the point

of cable entry as practical."

15) Lightning -- For added protection for this product during a lightning

storm, or when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable

system. This will prevent damage to the product due to lightning and

power-line surges.

16) Power Lines -- An outside antenna system should not be located in

the vicinity of overhead power lines or other electric light or power

circuits, or where it can fall into such power lines or circuits. When

installing an outside antenna system, extreme care should be taken to

keep from touching such power lines or circuits as contact with them

might be fatal.

17) Overloading -- Do not overload wall outlets, extension cords, or

integral convenience receptacles as this can result in risk of fire or

electric shock.

18) Object and Liquid Entry -- Never push objects of any kind into this

product through openings as they may touch dangerous voltage points

or short-out parts that could result in a fire or electric shock. Never spill

liquid of any kind on the product.

19) Servicing -- Do not attempt to service this product yourself as

opening or removing covers may expose you to dangerous voltage or

other hazards. Refer all servicing to qualified service personnel.

20) Damage Requiring Service -- Unplug this product from the wall

outlet and refer servicing to qualified service personnel under the

following conditions:

a ) when the power-supply cord or plug is damaged.

b ) if liquid has been spilled, or objects have fallen into the product.

c ) if the product has been exposed to rain or water.

d) if the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the

operating instructions as an improper adjustment of other controls may

result in damage and will often require extensive work by a qualified

technician to restore the product to its normal operation.

e) if the product has been dropped or damaged in any way.

f) when the product exhibits a distinct change in performance _ this

indicates a need for service.

21) Replacement Parts -- When replacement parts are required, be

sure the service technician has used replacement parts specified by

the manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock, or other

hazards.

22) Safety Check -- Upon completion of any service or repairs to this

product, ask the service technician to perform safety checks to

determine that the product is in proper operating condition.

23) Wall or Ceiling Mounting -- The product should be mounted to a

wall or ceiling only as recommended by the manufacturer.

24) Heat -- The product should be situated away from heat sources

such as radiators, heat registers, stoves, or other products (including

amplifiers) that produce heat.

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

NEC - NATIONAL ELECTRICAL CODE

ELECTRIC

SERVICE

EQUIPMENT

Example of Antenna Grounding

as per National Electrical

Code, ANSI/NFPA 70

GROUND

CLAMP

Important Safety Instructions

Before Use

Avant Utilisation

ENGLISH

FRANÇAIS

Lire ceci avant de faire fonctionner l'appareil

< L'appareil pouvant dégager de la chaleur lorsqu'il fonctionne,

laisser un dégagement suffisant au-dessus de l'appareil afin de

permettre une ventilation naturelle.

< La tension d'alimentation de l'appareil doit être celle indiquée à

l'arrière de l'appareil. En cas de doute, contacter un électricien.

< Choisir avec soin l'endroit où vous placerez votre appareil. Eviter

de le placer directement au soleil ou près d'une source de

chaleur. Eviter aussi les endroits sujets à des vibrations, à de la

poussière excessive, à la chaleur, au froid ou à l'humidité.

< Ne pas placer SL-D80 sur le dessus de l'amplificateur/récepteur.

< Ne pas ouvrir le coffret car ceci risquerait de provoquer des

dommages aux circuits ou des chocs électriques. Si un objet

rentre dans l'appareil, contacter votre revendeur.

< Lors du débranchement du cordon d'alimentation de la prise

murale, toujours tirer sur la fiche et non sur le cordon.

< Pour garder le capteur laser propre, ne pas y toucher et ne pas

oublier de fermer le tiroir du disque.

< Ne pas essayer de nettoyer l'appareil avec des solvants

chimiques car ceci pourrait endommager le fini de l'appareil.

Utiliser un chiffon propre et sec.

< Garder soigneusement ce manuel d'instructions pour une

référence ultérieure.

Read this before operation

< As the unit may become warm during operation, always leave

sufficient space around the unit for ventilation.

< The voltage supplied to the unit should match the voltage as

printed on the rear panel. If you are in any doubt regarding this

matter, consult an electrician.

< Choose the installation location of your unit carefully. Avoid

placing it in direct sunlight or close to a source of heat. Also avoid

locations subject to vibrations and excessive dust, heat, cold or

moisture.

< Do not place the unit on an amplifier/receiver.

< Do not open the cabinet as this might result in damage to the

circuitry or electrical shock. If a foreign object should get into the

set, contact your dealer or service agency.

< When removing the power plug from the wall outlet, always pull

directly on the plug, never yank the cord.

< To keep the laser pickup clean, do not touch it, and do not forget

to close the disc tray when not using the CD player.

< Do not attempt to clean the unit with chemical solvents as this

might damage the finish. Use a clean, dry cloth.

< Keep this manual in a safe place for future reference.

DO NOT MOVE THE UNIT DURING PLAYBACK

During playback, the disc rotates at high speed. Do NOT lift or

move the unit during playback. Doing so may damage the disc.

WHEN MOVING THIS UNIT

When changing places of installation or packing the unit for

moving, be sure to remove the disc. Then, press the power switch

to turn the power off, and disconnect the power cord. Moving this

unit with the disc loaded may result in damage to this unit.

NE DEPLACEZ PAS CET APPAREIL PENDANT L'ECOUTE D'UN

DISQUE

Pendant une écoute, le disque tourne à grande vitesse. Ne

soulevez pas cet appareil et ne le déplacez pas pendant l'écoute

d'un disque. En effet, vous risqueriez d'endommager ce disque.

CONSIGNES DE DEPLACEMENT DE CET APPAREIL

Lorsque vous changez de lieu d'installation ou lorsque vous

emballez cet appareil pour le déplacer, n'oubliez pas de retirer le

disque. Ensuite, appuyez sur le bouton POWER pour couper la

chaîne. Débranchez le câble électrique. Si vous déplacez cet

appareil alors qu'il contient un disque, vous risquez

d'endommager cet appareil.

Beware of condensation

When the unit (or a disc) is moved from a cold to a warm place, or

used after a sudden temperature change, there is a danger of

condensation; vapor in the air could condense on the internal

mechanism, making correct operation impossible. To prevent this,

or if this occurs, leave the unit for one or two hours with the

power turned on. The unit will stabilize at the temperature of its

surroundings.

Maintenance

If the surface of the unit gets dirty, wipe with a soft cloth or use

diluted mild soap liquid. Be sure to remove any excess

completely. Do not use thinner, benzine or alcohol as they may

damage the surface of the unit.

Risque de condensation

En cas de déplacement de l'appareil (ou d'un disque) d'un endroit

froid vers un endroit chaud, ou en cas d'utilisation après un

changement de température brutale, il y a un risque de

condensation. La vapeur contenue dans l'air peut se condenser

sur le mécanisme interne et affecter le bon fonctionnement de

l'appareil. Pour éviter ceci, ou au cas où cela venait à se

produire, laisser l'appareil sous tension pendant une heure ou

deux. Ceci lui permettra de se stabiliser à la température

ambiante.

Entretien

Si la surface de l'appareil devient sale, nettoyer celle-ci à l'aide

d'un chiffon doux ou utiliser un liquide de nettoyage neutre. La

nettoyer entièrement. Ne pas utiliser de diluant, de benzine ou

d'alcool car ils risquent d'endommager la surface de l'appareil.

ENGLISH

FRANÇAIS

< Should the disc become dirty, wipe the

surface radially with a soft, dry cloth. Do

not wipe in a circular motion :

Compact Disc

Disques Compacts

< Si la surface du disque est sale,

l'essuyer soigneusement à l'aide d'un

chiffon doux et sec :

Discs which can be used with this unit:

Conventional audio CDs

Properly finalized CD-R discs

Note:

Depending on the quality of the disc and/or the condition of the

recording, some CD-R discs may not be playable.

CD-RW discs cannot be played on this unit.

< Always place the disc on the disc tray with the label side

uppermost. (Compact discs can be played or recorded only on

one side.)

< To remove a disc from its storage case, press down on the center

of the case and lift the disc out, holding it carefully by the edges.

Disques qui peuvent être jouer sur cet appareil,

DC audio conventionnel

Enregistrements CD-R finalisés correctement

Veuillez noter :

Dépendant de la qualité du disque et/ou la condition de

l'enregistrement, certain disques CD-R ne joueront pas.

Les disques CD-RW ne joueront pas.

< Placer toujours le disque sur le plateau, la face imprimée sur le

dessus (les disques compacts ne sont enregistrés que sur une

seule face.)

< Pour sortir un disque de son emballage, appuyer sur la partie

centrale de l'étui et sortir le disque en veillant à bien le tenir par

les bords.

< Never use such chemicals as record sprays, antistatic sprays or

fluid, benzine or thinner to clean the discs. Such chemicals will do

irreparable damage to the disc's plastic surface.

< Discs should be returned to their cases after use to avoid dust

and scratches that could cause the laser pickup to "skip."

< Do not expose discs to direct sunlight or high humidity and

temperature for extended periods. Long exposure to high

temperatures will warp the disc.

< CD-R discs are more sensitive to the effects of heat and

ultraviolet rays than ordinary CDs. It is important that they are not

stored in a location where direct sunlight will fall on them, and

which is away from sources of heat such as radiators or heat-

generating electrical devices.

< Printable CD-R discs aren't recommended, as the label side might

be sticky and damage the unit.

< Do not stick papers or protective sheets on the discs and do not

use any protective coating spray.

< Use a soft oil-based felt-tipped pen to write the information on the

label side. Never use a ball-point or hard-tipped pen, as this may

cause damage to the recorded side.

< Never use a stabilizer. Using commercially available CD

stabilizers with this unit will damage the mechanisms and cause

them to malfunction.

< Do not use irregular shape CDs (octagonal, heart-shape, etc.).

CDs of this sort can damage the unit:

How to remove the disc

How to hold the disc

< If you are in any doubt as to the care and handling of a CD-R disc,

read the precautions supplied with the disc, or contact the disc

manufacturer directly.

< Ne jamais utiliser de produits chimiques, tels que des sprays, des

liquides antistatiques, de l'essence ou des diluants pour nettoyer

les disques. Ces produits chimiques risquent de provoquer des

dégâts irréparables sur la surface en plastique du disque.

< Ranger les disques dans leur étui après utilisation afin d'éviter de

les rayer ou que de la poussière ne se dépose, ceci pouvant

compromettre la lecture par la tête laser

< Ne pas exposer les disques à la lumière directe du soleil, à une

température élevée ou à une humidité excessive pendant une

période prolongée. De telles expositions risquent de provoquer

une déformation du disque.

< Les disques CD-R sont plus sensibles aux effets de la chaleur et

aux rayons ultraviolets que les disques compacts ordinaires. Il est

donc particulièrement important de les ranger dans un endroit à

l'abri de la lumière directe du soleil et de toute source de chaleur,

telle que des radiateurs ou des appareils électriques,

susceptibles de dégager de la chaleur.

< Il est déconseillé d'utiliser des disques CD-R inscriptibles, la face

portant l'étiquette risquant d'être collante et d'endommager

l'appareil.

< Ne jamais coller d'étiquette ou de feuille de protection sur le

disque; ne pas utiliser de spray destiné à déposer sur le disque

une couche de protection.

< Utiliser, pour écrire des informations sur la face portant

l'étiquette, un feutre utilisant une encre à base d'huile. Ne jamais

utiliser de stylo bille ou de stylo à pointe dure, qui risquerait

d'abîmer la surface enregistrée du disque.

< Ne jamais utiliser de stabilisateurs. L'utilisation, avec cet

appareil, de stabilisateurs pour CD disponibles dans le

commerce, pourrait endommager les mécanismes de l'appareil et

provoquer son dysfonctionnement.

< Ne pas utiliser de CD ayant une forme irrégulière (octogonale, en

forme de coeur, etc.), ceux-ci risquant d'endommager l'appareil :

< En cas de doute quant à la manipulation des CD-R, lire les

instructions fournies avec le disque ou contacter directement le

fabricant du disque.

Comment sortir un disque

de son emballage

Comment tenir le disque