TEAC R-1 - Owner's Manual Immediate Download

ENGLISH

FRANÇAIS

ESPAÑOL

9A10303200

FM/AM Radio

OWNER'S MANUAL

MANUEL DU PROPRIÉTAIRE

MANUAL DEL USUARIO

R-1

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated "dangerous voltage"

within the product's enclosure that may be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings.

Install

accordance

with

the

manufacturer's instructions.

8) Do not install near any heat sources such

as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that

produce heat.

9) Do not defeat the safety purpose of the

polarized or grounding-type plug. A

polarized plug has two blades with one

wider than the other. A grounding type

plug has two blades and a third

grounding prong. The wide blade or the

third prong are provided for your safety.

If the provided plug does not fit into your

outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being

walked on or pinched particularly at

plugs, convenience receptacles, and the

point where they exit from the apparatus.

11) Only

use

attachments/accessories

specified by the manufacturer.

12) Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination

to avoid injury from tip-over.

13) Unplug this apparatus during lightning

storms or when unused for long periods

of time.

14) Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as power-supply cord or plug is

damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

ENGLISH

< Do not expose this apparatus to drips or

splashes.

< Do not place any objects filled with

liquids, such as vases, on the apparatus.

< Do not install this apparatus in a confined

space such as a book case or similar unit.

< The apparatus draws nominal non-

operating power from the AC outlet with

its POWER switch in the off position.

< The apparatus should be located close

enough to the AC outlet so that you can

easily grasp the power cord plug at any

time.

< An apparatus with Class ! construction

shall be connected to an AC outlet with a

protective grounding connection.

CAUTION

< DO NOT REMOVE THE EXTERNAL CASES

CABINETS

EXPOSE

THE

ELECTRONICS. NO USER SERVICEABLE

PARTS ARE WITHIN!

< IF YOU ARE EXPERIENCING PROBLEMS

WITH THIS PRODUCT, CONTACT TEAC

FOR A SERVICE REFERRAL. DO NOT USE

THE PRODUCT UNTIL IT HAS BEEN

REPAIRED.

This equipment has been tested and found

to comply with the limits for a Class B

digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to

provide reasonable protection against

harmful interference in a residential

installation. This equipment generates,

uses, and can radiate radio frequency

energy and, if not installed and used in

accordance with the instructions, may

cause harmful interference to radio

communications. However, there is no

guarantee that interference will not occur

in a particular installation. If this

equipment

does

cause

harmful

interference to radio or television

reception, which can be determined by

turning the equipment off and on, the

user is encouraged to try to correct the

interference by one or more of the

following measures:

· Reorient or relocate the equipment

and/or the receiving antenna.

· Increase the separation between the

equipment and receiver.

· Connect the equipment into an outlet

on a circuit different from that to which

the receiver is connected.

· Consult the dealer or an experienced

radio/TV technician for help.

CAUTION

Changes or modifications to this

equipments not expressly approved by

TEAC CORPORATION for compliance will

void the user's warranty.

For U.S.A.

WARNING : TO PREVENT FIRE

OR SHOCK HAZARD, DO NOT

EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

Before Use

Contents

Read this before operation

< As the unit may become warm during

operation, always leave sufficient space

around the unit for ventilation.

< Do not use any AC adaptors other than

the one included with this unit to avoid

fire, electric shock, etc. Be sure to connect

the AC adaptor to an AC outlet that

supplies the correct voltage.

< Choose the installation location of your

unit carefully. Avoid placing it in direct

sunlight or close to a source of heat. Also

avoid locations subject to vibrations and

excessive dust, heat, cold or moisture.

< Do not open the cabinet as this might

result in damage to the circuitry or

electrical shock. If a foreign object should

get into the unit, contact your dealer or

service company.

< When removing the AC adaptor from the

wall outlet, Always pull gently on the

adaptor case. Never yank the cord.

< Do not attempt to clean the unit with

chemical solvents as this might damage

the finish. Use a clean, dry cloth.

< Keep this manual in a safe place for

future reference.

CAUTION

The product shall not be exposed to

dripping or splashing and that no object

filled with liquids, such as vases, shall be

placed on the product.

Do not install this equipment in a confined

space such as a book case or similar unit.

Thank you for choosing TEAC. Read this

manual carefully to get the best

performance from this unit.

Important Safety Instruction . . . . . . . . . . . . 2

Before Use . . . . . . . . . . . . . . . . . . . . . . . . . 4

Rechargeable Batteries . . . . . . . . . . . . . . . . 5

Connection . . . . . . . . . . . . . . . . . . . . . . . . . 6

Names of Each Control . . . . . . . . . . . . . . . . 8

Listening to the Radio . . . . . . . . . . . . . . . . . 9

Listening to FM Stereo . . . . . . . . . . . . . . . 10

Listening to an External Saurce . . . . . . . . . 10

Troubleshooting . . . . . . . . . . . . . . . . . . . . 11

Specifications . . . . . . . . . . . . . . . . . . . . . . 11

ENGLISH

Rechargeable Batteries

The R-1 uses a Nickel-Metal-Hydride battery

pack stored in the battery compartment.

Leaving the AC adaptor connected to the R-

1 and plugged in AC line, even when not in

use, ensures the batteries will be fully

charged when you need to use the R-1 on

battery power. The R-1 can be used for 6 to

7 hours after batteries are fully charged.

< When the batteries become discharged

and need to be recharged, the POWER

ON indicator blinks at intervals. And the

blinling will grow faster as the batteries

get closer to discharge until the R-1 shuts

off automatically to protect the batteries.

< When the R-1 is not used but the AC

adaptor plugged in, the batteries will be

completely charged within approximately

3.5 hours from full discharge. During this

period the POWER ON indicator flushes at

intervals.

< When the R-1 is ON and the AC adaptor

plugged in, the batteries will be

completely charged within approximately

24 hours.

< It may take up to 4 charge and discharge

cycles before the batteries are operating

at full capacity when the R-1 is new or

left unused for several weeks.

It is suggested that the R-1 is plugged in

for about 12 hours before you use it first.

< Once the R-1 has been fully charged

while it is OFF, do not unplug the AC

adaptor and then immediately plug it

again, as this will restart the charging

even though the batteries are fully

charged. Doing this repeatedly will

damage the batteries.

< If the R-1 is not plugged in, the batteries

will slowly self-discharge as a safety

measure.

Battery Replacement

When the batteries are exhausted, replace

the battery pack with new one.

1. Remove the battery compartment cover.

2. Disconnect the connector of the battery

pack, and remove it.

3. Insert a new battery pack and connect its

connector.

4. Close the cover.

Caution:

< Do not heat or disassemble rechargeable

batteries and never dispose of old

batteries by throwing them in a fire