TEAC DV-M5000 - Owner's Manual Immediate Download

9A09062801

DV-M5000

DVD Multi Player

OWNER'S MANUAL

MANUEL DU PROPRIETAIRE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

R THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT

OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE

PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO

CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

AC POWER CORD CONNECTION

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO

WIDE SLOT, FULLY INSERT.

CORDE DE CONNEXION CA

ATTENTION:

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME

PLUS

LARGE

FICHE

DANS

BORNE

CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND.

For CANADA

Pour le CANADA

Optical pickup :

Type

KHM-230AAA

Manufacturer :

SONY CORPORATION

Laser output

Less than 0.7mW on the objective lens

Wavelength

760-800nm(CD),640-660nm(DVD)

CAUTION

< DO NOT REMOVE THE PROTECTIVE HOUSING USING

SCREWDRIVER.

< USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

< IF THIS PRODUCT DEVELOPS TROUBLE, MAKE A CONTACT WITH

OUR SERVICEMAN, AND DO NOT USE THE PRODUCT IN A

TROUBLED STATE.

TO THE USER

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against interference in a residential area. This device generates and uses radio

frequency energy and if not installed and used in accordance with the instructions, it may cause interference to radio or TV reception. If

this unit does cause interference with TV or radio reception you can try to correct the interference by one or more of the following

measures :

a) Reorient or relocate the receiving antenna.

b) Increase the separation between the equipment and the receiver.

c) Plug the equipment into a different outlet so that it is not on the same circuit as the receiver. If necessary, consult the dealer or an

experienced radio/TV technician for additional suggestions.

CAUTION

Changes or modifications to this equipment not expressly approved by TEAC CORPORATION for compliance could void the user's authority

to operate this equipment.

For U.S.A.

Important Safety Instructions

This product has been designed and manufactured according to

FDA regulations "title 21, CFR, chapter 1, subchapter J, based on the

Radiation Control for Health and Safety Act of 1968", and is

classified as class 1 laser product. There is not hazardous invisible

laser radiation during operation because invisible laser radiation

emitted inside of this product is completely confined in the

protective housings.

The label required in this regulation is shown

For U.S.A.

CAUTION

< Read all of these Instructions.

< Save these Instructions for later use.

< Follow all Warnings and Instructions marked on the audio equipment.

1) Read Instructions -- All the safety and operating instructions should

be read before the product is operated.

2) Retain Instructions -- The safety and operating instructions should

be retained for future reference.

3) Heed Warnings -- All warnings on the product and in the operating

instructions should be adhered to.

4) Follow Instructions -- All operating and use instructions should be

followed.

5) Cleaning -- Unplug this product from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

6) Attachments -- Do not use attachments not recommended by the

product manufacturer as they may cause hazards.

7) Water and Moisture -- Do not use this product near water -- for

example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a

wet basement; or near a swimming pool; and the like.

8) Accessories -- Do not place this product on an unstable cart, stand,

tripod, bracket, or table. The product may fall, causing serious injury to

a child or adult, and serious damage to the product. Use only with a

cart, stand, tripod, bracket, or table recommended by the manufacturer,

or sold with the product. Any mounting of the product should follow the

manufacturer's instructions, and should use a

mounting accessory recommended by the

manufacturer.

9) A product and cart combination should be

moved with care. Quick stops, excessive force,

and uneven surfaces may cause the product and

cart combination to overturn.

10) Ventilation -- Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the product and to

protect it from overheating, and these openings must not be blocked or

covered. The openings should never be blocked by placing the product

on a bed, sofa, rug, or other similar surface. This product should not be

placed in a built-in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer's instructions have

been adhered to.

11) Power Sources -- This product should be operated only from the

type of power source indicated on the marking label. If you are not sure

of the type of power supply to your home, consult your product dealer

or local power company. For products intended to operate from battery

power, or other sources, refer to the operating instructions.

12) Grounding or Polarization -- This product may be equipped with a

polarized alternating-current line plug (a plug having one blade wider

than the other). This plug will fit into the power outlet only one way. This

is a safety feature. If you are unable to insert the plug fully into the

outlet, try reversing the plug. If the plug should still fail to fit, contact

your electrician to replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

13) Power-Cord Protection -- Power-supply cords should be routed so

that they are not likely to be walked on or pinched by items placed upon

or against them, paying particular attention to cords at plugs,

convenience receptacles, and the point where they exit from the

product.

14) Outdoor Antenna Grounding -- If an outside antenna or

cable

system is connected to the product, be sure the antenna or cable

system is grounded so as to provide some protection against voltage

surges and built-up static charges. Article 810 of the National Electrical

Code, ANSI/NFPA 70, provides information with regard to proper

grounding of the mast and supporting structure, grounding of the lead-

in wire to an antenna discharge unit, size of grounding conductors,

location of antenna-discharge unit, connection to grounding electrodes,

and requirements for the grounding electrode.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to

Section 820-40 of the NEC which provides guidelines for proper

grounding and, in particular, specifies that the cable ground shall be

connected to the grounding system of the building, as close to the point

of cable entry as practical."

15) Lightning -- For added protection for this product during a lightning

storm, or when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable

system. This will prevent damage to the product due to lightning and

power-line surges.

16) Power Lines -- An outside antenna system should not be located in

the vicinity of overhead power lines or other electric light or power

circuits, or where it can fall into such power lines or circuits. When

installing an outside antenna system, extreme care should be taken to

keep from touching such power lines or circuits as contact with them

might be fatal.

17) Overloading -- Do not overload wall outlets, extension cords, or

integral convenience receptacles as this can result in risk of fire or

electric shock.

18) Object and Liquid Entry -- Never push objects of any kind into this

product through openings as they may touch dangerous voltage points

or short-out parts that could result in a fire or electric shock. Never spill

liquid of any kind on the product.

19) Servicing -- Do not attempt to service this product yourself as

opening or removing covers may expose you to dangerous voltage or

other hazards. Refer all servicing to qualified service personnel.

20) Damage Requiring Service -- Unplug this product from the wall

outlet and refer servicing to qualified service personnel under the

following conditions:

a ) when the power-supply cord or plug is damaged.

b ) if liquid has been spilled, or objects have fallen into the product.

c ) if the product has been exposed to rain or water.

d) if the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the

operating instructions as an improper adjustment of other controls may

result in damage and will often require extensive work by a qualified

technician to restore the product to its normal operation.

e) if the product has been dropped or damaged in any way.

f) when the product exhibits a distinct change in performance _ this

indicates a need for service.

21) Replacement Parts -- When replacement parts are required, be

sure the service technician has used replacement parts specified by

the manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock, or other

hazards.

22) Safety Check -- Upon completion of any service or repairs to this

product, ask the service technician to perform safety checks to

determine that the product is in proper operating condition.

23) Wall or Ceiling Mounting -- The product should be mounted to a

wall or ceiling only as recommended by the manufacturer.

24) Heat -- The product should be situated away from heat sources

such as radiators, heat registers, stoves, or other products (including

amplifiers) that produce heat.

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

NEC - NATIONAL ELECTRICAL CODE

ELECTRIC

SERVICE

EQUIPMENT

Example of Antenna Grounding

as per National Electrical

Code, ANSI/NFPA 70

GROUND

CLAMP

Important Safety Instructions

ENGLISH

FRANÇAIS

Contents

Sommaire

Before Use.....................................................4

Discs ..............................................................6

Remote Control Unit ....................................9

Connection .................................................10

Loading Discs ............................................12

Basic Play ...................................................13

Special Functions .....................................15

Repeat Play ................................................16

Programmed Play ......................................18

Shuffle Play ................................................19

Setup Menu ................................................20

Troubleshooting ........................................26

Specifications ...........................................26

Thank you for choosing TEAC. Read this

manual

carefully

get

the

best

performance from this unit.

Nous vous remercions d'avoir choisi Teac.

Lire ce manuel attentivement pour obtenir

les meilleures performances possibles de

cet appareil.

Before Use (1)

Avant l'utilisation (1)

Conventions about This Manual

< The types of functions and operations that

can be used for a particular disc vary

depending on the features of that disc. In

some cases, these functions and

operations

may

differ

from

the

descriptions given in this Owner's

Manual. In this event, follow the

instructions given on the screen. This

Owner's Manual only covers basic disc

operations.

< For some operations, the

icon may

appear on the screen. This indicates that

the operation described in this Owner's

Manual is not permitted for the current

disc.

< The drawings about the TV screen and

front panel display used in this Owner's

Manual are purely for the purposes of

explanation. The actual displays may

differ slightly from what are shown here.

Television Formats

Color system can be switched according to

your local requirement at the rear panel:

NTSC color system for North America and

Japan, and PAL system for Europe

Conventions de ce livret

< Le genre de fonctions et opérations qui

peuvent être utiliser pour un disque en

particulier

diffère

selon

les

caractéristiques de ce disque. Dans

certain cas, ces fonctions et opérations

peuvent différer des discriptions données

dans ce livret d'instruction. Dans ce cas,

suivre les instructions données sur

l'écran. Ce livret d'instruction couvre

seulement les fonctions de base du

disque.

< Pour certaines opérations, l'icone

peut

apparaitre sur l'écran. Cela indique que

l'opération décrite dans ce livret

d'instruction n'est pas permise pour le

disque courant.

< Les desseins à propos de l'écran du

téléviseur et l'afficheur du panneau avant

utilisés dans ce livret d'instruction sont

strictement pour vous renseigner.

L'affichage réel peut différer légèrement

de ceux illustrées.

Formats de télévision

Le système de couleur peut être changer en

accordance avec votre localité par un

commutateur sur le panneau arrière:

Système de couleur NTSC pour l'Amérique

du Nord et le Japon et système PAL pour

l'Europe.

Avant l'utilisation ......................................4

Disques ........................................................6

Boîtier de télécommande ..........................9

Raccordement ..........................................10

Chargement des disques ........................12

Lecture de base ........................................13

Fonctions spéciales ................................15

Lecture répétée .........................................16

Lecture programmée ................................18

Lecture aléatoire........................................19

Menu SETUP ..............................................20

Dépannage ..................................................27

Caractéristiques techniques ..................27

ENGLISH

FRANÇAIS

Before Use (2)

Avant l'utilisation (2)

For Safe and Efficient

Operation

Caution: Read This Before Operating Your

Unit.

< This equipment is a sophisticated electro

mechanical device. To ensure proper

operation, please read this manual

carefully.

< Choose the installation location of your

unit carefully. Avoid placing it in direct

sunlight. Also avoid locations subject to

vibration and excessive dust, heat, cold or

moisture. Keep away from such sources

of hum as transformers or motors.

< Do not use this unit where there are

extremes in temperature (below 41°F/5°C

or exceeding 95°F/35°C) or where direct

sunlight may strike it.

< Do not open the cabinet as this might

result in damage to the set or electrical

shock.

< Be sure hands are clean when handling

discs. Never insert a damaged disc!

< When disconnecting the power cord from

the wall outlet, always grasp it by the plug.

Never yank the cord.

< Do not use force when operating the

switch and buttons.

< Before moving the unit be sure to

disconnect the power cord and all

connecting cables.

< To keep the laser-pickup clean, always

close the disc tray when not in use.

< Do not attempt to clean the unit with

chemical solvents as this might damage

the finish. Use a clean, dry cloth.

DANGER: Never operate this unit with the

top cover removed. Exposure to invisible

laser radiation may be harmful.

Note:

< Do not move this player with discs in the

disc tray. Discs may get out of position

and consequently damage the discs or the

player. If discs get jammed within the

mechanism, refer your machine to a

qualified repair agency. Do NOT attempt

to remove the discs yourself!

< Be sure to read the TROUBLESHOOTING

section for advice on common operating

errors before concluding that your unit

requires service.

< Keep this manual in a safe place for future

reference.

THE WARRANTY ON THIS UNIT DOES

NOT COVER DAMAGE CAUSED BY MIS

HANDLING OR MISUSE.

Caution:

Since

this

unit

incorporates

microcomputer, it is sensitive to external

noise, static electricity, etc. and on rare

occasions it not operate correctly. If the

unit stops operating properly, turn the

unit off, unplug and replug the AC power

cable, and turn the unit back on. This will

reset the internal microprocessor and

should restore normal operations. If the

unit continues to operate improperly,

refer the unit to a qualified service

agency.

Pour une utilisation sécuritaire

et efficace

Avertissement: Lire ce qui suit avant

d'utiliser l'appareil.

< Ceci est un appareil électro-mécanique

sophistiqué. Pour un rendement fiable,

veuillez lire ce manual attentivement.

< Choisir l'emplacement soigneusement.

Éviter les rayons solaires directs. Aussi

éviter les endroits sujet aux vibrations ou

poussière excessive, chaleur, froid ou

humidité. Tenir éloigner de sources de

grondement tel que transformateurs ou

moteurs.

< Ne pas utiliser cet appareil où il y a des

extremes de température (sous 41°F/5°C

ou excédant 95°F/35°C) et où il est exposé

directement aux rayons solaires.

< Ne pas ouvrir le cabinet, cela peut causer

de l'endommagement ou un choc

électrique.

< Assurez-vous que vos mains sont propres

durant la manipulation des disques. Ne

jamais insérer un disque craqué.

< Si vous débranchez l'appareil, toujours

tenir le cordon par la prise. Ne jamais tirer

sur le cordon.

< Ne pas utiliser une force excessive avec

les commutateurs ou touches d'opération.

< Avant de déplacer l'appareil, débrancher

le ainsi que tous les cables de

raccordement.

< Afin de maintenir le capteur laser propre,

ne pas oubler de fermer le tirroir.

< Ne pas nettoyer l'appareil avec des

diluants chimiques car cela peut

endommager le finie. Utiliser un chiffon

sec et propre.

DANGER: Ne jamais utiliser cet appareil si

le couvercle est enlevé. Une exposition à

des rayons laser invisibles peut être

dangereuse.

Remarque:

< Ne pas déplacer ce lecteur si il y a un

disque à l'intérieur. Sinon il risque de ce

déplacer et être endommager ou

endommager le lecteur. Si des disques

sont coincés dans le mécanisme, reférez-

vous à un dépanneur qualifié. NE PAS

essayer d'enlever les disques vous même.

< Assurez-vous de lire DÉPANNAGE pour

des renseignements sur des erreurs

communes d'opération, avant de conclure

que l'appareil est défectueux.

< Garder ce livret dans un endroit

sécuritaire pour rérérence future.

LA GARANTIE DE CET APPAREIL NE

COUVRE PAS L'ENDOMMAGEMENT DUE À

L'ABUT OU MAUVAISE UTILISATION.

Avertissement:

Du au fait que cet appareil incorpore un

microprocessor, il est sensible aux bruits

externes, électricité statique, etc... et en

des occasions rares n'opère pas

correctement. Si l'appareil ne fonctionne

pas correctement, l'éteindre, débrancher

le cordon d'alimentation brèvement et le

rebrancher et ré-allumer l'appareil. Cela

remet en marche le microprocesseur

interne et devrait le retourner à une

opération normale. Si l'appareil continue à

ne pas fonctionner correctement, vous

reférez à un dépanneur qualifié.