»
CD-BT1
Portable CD Bass
Trainer
OWNERS MANUAL
is appliance has a serial number located
on the rear panel lease record the model
number and serial number and retain them
for your records
odel number
_____________
erial number
_____________
D00764900A
2 -- TASCAM CD-BT1
TASCAM CD-BT1 --
3
Important safety precautions
Y
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSON-
NEL.
E
The lightning flash with arrowhead symbol,
within an equilateral trinagle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's en-
closure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
R
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
FOR U.S.A.
TO THE USER
This equipment has been tested and found to
comply with the limits for a Class B digital de-
vice, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable pro-
tection against harmful interference when the
equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can
radiate radio frequency energy and, if not in-
stalled and used in accordance with the instruc-
tion manual, may cause harmful interference to
radio communications.. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encour-
aged to try to correct the interference by one or
more of the following countermeasures.
a) Reorient or relocate the receiving antenna
b) Increase the separation between the
equipment and receiver.
c) Connect the equipment into an outlet on a
circuit other from that to which the receiver
is connected.
d) Consult the dealer or an experienced radio/
TV technician for help.
CAUTION
Changes or modifications to this equipment not
expressly approved by TEAC CORPORATION for
compliance could void the user's authority to
operate this equipment.
2 -- TASCAM CD-BT1
TASCAM CD-BT1 --
3
Important Safety Instructions
1
Read these instructions.
2
Keep these instructions.
3
Heed all warnings.
4
Follow all instructions.
5
Do not use this apparatus near water.
6
Clean only with dry cloth.
7
Do not block any ventilation openings. Install
in accordance with the manufacturer's instructions.
8
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9
Do not defeat the safety purpose of the po-
larized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
10 Protect the power cord from being walked on
or pinched particularly at plugs, convenience recep-
tacles, and the point where they exit from the ap-
paratus.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified service person-
nel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the appara-
tus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
·
Do not expose this apparatus to drips or
splashes.
·
Do not place any objects filled with liquids,
such as vases, on the apparatus.
·
Do not install this apparatus in a confined
space such as a book case or similar unit.
·
The apparatus draws nominal non-operating
power from the AC outlet with its POWER switch in
the off position.
4 -- TASCAM CD-BT1
Safety Information
This product has been designed and manu-
factured according to FDA regulations "title
21, CFR, chapter1, subchapter J, based on the
Radiation Control for Health and Safety Act
of 1968", and is classified as a class 1 laser
product. There is no hazardous invisible laser
radiation during operation because invisible
laser radiation emitted inside of this product is
completely confined in the protective housings.
The label required in this regulation is shown
here.
CAUTION
· DO NOT REMOVE THE PROTECTIVE HOUSING
USING A SCREWDRIVER.
· USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
· IF THIS PRODUCT DEVELOPS TROUBLE, CON-
TACT YOUR NEAREST QUALIFIED SERVICE
PERSONNEL, AND DO NOT USE THE PROD-
UCT IN ITS DAMAGED STATE.
Optical pickup: Type KSM-900AAA
Manufacturer: SONY CORPORATION
Laser output: <1 mW play on the objec-
tive lens
Wavelength: 775--816 nm
Important Safety Instructions
TASCAM CD-BT1 --
5
First steps with your CD-BT1..............................6
Making connections ...........................................8
Using the menu system ......................................10
Using the CD player............................................12
Pitch and tempo changes ...................................14
Using effects.......................................................15
Effect presets and parameters ...........................16
EQ setting...........................................................17
Using the tuner...................................................18
Facts and figures (specifications) .......................19
Table of contents