SONY VPLHS2 - Owner's Manual Immediate Download

deo

oject

VPL-HS2

4-092-536-12 (1)

Video Projector

Operating Instructions

__________________________________ GB

Mode d'emploi

________________________________________ FR

Manual de instrucciones

_________________________________ ES

VPL-HS2

To prevent fire or shock hazard, do not expose

the unit to rain or moisture.

To avoid electrical shock, do not open the

cabinet. Refer servicing to qualified personnel

only.

For the customers in the USA

If you have any questions about this product, you may

contact:

Sony Electronics Inc.

Attn: Business Information Center (BIC)

12451 Gateway Boulevard

Ft. Myers, Florida 33913

Telephone No.: 800-686-7669

The number below is for FCC related matters only.

Declaration of Conformity

Trade Name: SONY

Model No.: VPL-HS2

Responsible Party: Sony Electronics Inc.

Address: 680 Kinderkamack Road, Oradell

NJ 07649 U.S.A.

Telephone No.: 201-930-6972

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2)

this device must accept any interference received,

including interference that may cause undesired

operation.

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio

or television reception, which can be determined by

turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and

receiver.

- Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or modifications not

expressly approved in this manual could void your

authority to operate this equipment.

For the customers in Canada

This Class B digital apparatus complies with Canadian

ICES-003.

Voor de klanten in Nederland

Dit apparaat bevat een vast ingebouwde batterij die niet

vervangen hoeft te worden tijdens de levensduur van het

apparaat.

Raadpleeg uw leverancier indien de batterij toch

vervangen moet worden. De batterij mag alleen

vervangen worden door vakbekwaam servicepersoneel.

Gooi de batterij niet weg maar lever deze in als klein

chemisch afval (KCA).

Lever het apparaat aan het einde van de levensduur in

voor recycling, de batterij zal dan op correcte wijze

verwerkt worden.

WARNING

This symbol is intended to alert the user to

the presence of uninsulated "dangerous

voltage" within the product's enclosure

that may be of sufficient magnitude to

constitute a risk of electric shock to

persons.

This symbol is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in

the literature accompanying the

appliance.

The socket-outlet should be installed near the

equipment and be easily accessible.

3 GB

Table of Contents

Precautions ............................................. 4

Connections and Preparations

Unpacking ............................................... 5

Step 1: Installing the Projector .............. 6

Before Setting Up the Projector .........................6

Using the Optional Conversion Lens .................7

Installing the Projector and a Screen ..................8

Step 2: Connecting the Projector ........ 10

Connecting with Video Equipment ..................10

Connecting Using the Optional Signal

Interface Cables ................................................11

Connecting Using the Optional

Interface Unit ....................................................12

Step 3: Adjusting the Picture Size and

Position .................................................. 12

Step 4: Selecting the Menu

Language ............................................... 16

Projecting

Projecting the Picture on the Screen .. 18

Selecting the Wide Screen Mode ........ 20

Selecting the Picture Viewing Mode ... 22

Using the Menus

Operation through the Menus ..............23

Menu Lists .............................................25

Menu Configurations ....................................... 25

Menu Items ...................................................... 25

About the Preset Memory No. ......................... 28

Adjusting Picture Quality of a Signal

from the Computer ........................................... 28

Others

Troubleshooting .......................................29

Replacing the Lamp .................................31

Replacing the Air Filter ............................32

Specifications ...........................................33

Location of Controls ................................40

Front ................................................................. 40

Rear .................................................................. 41

Remote Control ................................................ 42

Index ..........................................................43

4 Precautions

Precautions

On safety

· Check that the operating voltage of your unit is

identical with the voltage of your local power

supply.

· Should any liquid or solid object fall into the

cabinet, unplug the unit and have it checked by

qualified personnel before operating it further.

· Unplug the unit from the wall outlet if it is not to be

used for several days.

· To disconnect the cord, pull it out by the plug. Never

pull the cord itself.

· The wall outlet should be near the unit and easily

accessible.

· The unit is not disconnected to the AC power source

(mains) as long as it is connected to the wall outlet,

even if the unit itself has been turned off.

· Do not look into the lens while the lamp is on.

· Do not place your hand or objects near the

ventilation holes. The air coming out is hot.

On preventing internal heat build-up

After you turn off the power with the I / 1 (on/

standby) switch, do not disconnect the unit from the

wall outlet while the cooling fan is still running.

Caution

The projector is equipped with ventilation holes

(intake) and ventilation holes (exhaust). Do not block

or place anything near these holes, or internal heat

build-up may occur, causing picture degradation or

damage to the projector.

On repacking

Save the original shipping carton and packing

material; they will come in handy if you ever have to

ship your unit. For maximum protection, repack your

unit as it was originally packed at the factory.

Connectio

and

epar

ations

5 GB

Unpacking

Connections

and

Preparations

Unpacking

Check the carton to make sure it contains the

following items:

Remote control (1),

Size AA (R6)

batteries (2)

Signal interface

cable (1)

Air filter (for

replacement) (1)

Cinema filter (1)

Adjuster spacers (2)

AC power cord (1)

Operating Instructions (1)

Inserting the batteries into the remote

control

This section describes how to install the

projector and screen, how to connect the

equipment from which you want to project

the picture, etc.

Insert the batteries E side first as shown

in the illustration.

Inserting them forcibly or with the

polarities reversed may cause a short

circuit and may generate heat.