background image
9-928-344-11
PCG-Z505R/Z505RX (UC)
Sony Corporation
Information Technologies Company
Notebook Computer
9-928-344-11
PCG-Z505R/Z505RX
(UC)
9-928-344-11
99J1605-1
PCG-Z505R/Z505RX
SERVICE MANUAL
US Model
Canadian Model
English
99J1605-1
Printed in U.S.A.
© 1999. 10
Published by VAIO Customer Link Division (Japan)
Basic performances of PCG-Z505R and those of PCG-Z505RX are the same as those of PCG-Z505S/Z505SX.
Therefore, this manual describes the differences from PCG-Z505S/Z505SX and CHAPTER5. EXPLODED VIEW AND PARTS
LIST. The User Guide for this model is also included for your reference.
Refer to the PCG-Z505S/Z505SX SERVICE MANUAL (9-928-321-11) that is already issued for repair and inspection.
Items
CPU
HDD
BOARD
Mobile Pentium
R II 366MHz
(PCG-Z505SX)
Mobile CeleronTM 333MHz
(PCG-Z505S)
6.4GB
MBX-20
IFX-65
SWX-31
SWX-34
LEX-17
PCG-Z505S/Z505SX
Mobile Pentium
R II 400MHz
8.1GB
PCG-Z505RX
PCG-Z505R
MBX-31
IFX-87
SWX-42
SWX-43
LEX-19
Mobile Pentium
R II 366MHz
6.4GB
Specifications
MAJOR DIFFERENCES


background image
1-1
PCG-Z505R/Z505RX (UC)
CHAPTER 1.
SECTION 1
OPERATION
1-1. VAIO Z505 SuperSlim ProTM Notebook User Guide
VAIO Z505 SuperSlim ProTM
Notebook User Guide
PCG-Z505R/PCG-Z505RX
®
®


background image
Notice to Users
©
1999 Sony Electronics Inc. All rights
reserved. This manual and the software
described herein, in whole or in part, may
not be reproduced, translated, or reduced
to any machine-readable form without
prior written approval.
SONY ELECTRONICS INC. PROVIDES
NO WARRANTY WITH REGARD TO
THIS MANUAL, THE SOFTWARE, OR
OTHER INFORMATION CONTAINED
HEREIN AND HEREBY EXPRESSLY
DISCLAIMS ANY IMPLIED
WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR ANY PARTICULAR
PURPOSE WITH REGARD TO THIS
MANUAL, THE SOFTWARE, OR SUCH
OTHER INFORMATION. IN NO EVENT
SHALL SONY ELECTRONICS INC. BE
LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL, OR SPECIAL
DAMAGES, WHETHER BASED ON
TORT, CONTRACT, OR OTHERWISE,
ARISING OUT OF OR IN CONNECTION
WITH THIS MANUAL, THE SOFTWARE,
OR OTHER INFORMATION
CONTAINED HEREIN OR THE USE
THEREOF.
Sony Electronics Inc. reserves the right to
make any modification to this manual or
the information contained herein at any
time without notice. The software
described herein is governed by the terms
of a separate user license agreement.
This product contains software owned by
Sony and licensed by third parties. Use of
such software is subject to the terms and
conditions of license agreements enclosed
with this product. Some of the software
may not be transported or used outside the
United States. Software specifications are
subject to change without notice and may
not necessarily be identical to current retail
versions.
Updates and additions to software may
require an additional charge. Subscriptions
to online service providers may require a
fee and credit card information. Financial
services may require prior arrangements
with participating financial institutions.
As an
ENERGY STAR
Partner, Sony Corporation
has determined that this
product meets the
ENERGY
STAR guidelines for energy
efficiency.
The International
ENERGY STAR Office
Equipment Program is an international
program that promotes energy saving
through the use of computers and other
office equipment. The program backs the
development and dissemination of
products with functions that effectively
reduce energy consumption. It is an open
system in which business proprietors can
participate voluntarily. The targeted
products are office equipment such as
computers, displays, printers, facsimiles
and copiers. Their standards and logos are
uniform among participating nations.
ENERGY STAR is a U.S. registered mark.
Sony, i.LINK, VAIO, the VAIO logo, Z505
SuperSlim Pro, Memory Stick, and the
Memory Stick
logo are trademarks of Sony
Corporation. Windows and the
Windows 98 logo are registered
trademarks of Microsoft Corporation.
All other trademarks are trademarks of
their respective owners


background image
Owner's Record
The model number and serial number are
located on the bottom of your Sony VAIO®
Z505 SuperSlim ProTM notebook. Record
the serial number in the space provided
here. Refer to the model and serial number
when you call your Sony Service Center.
Model Number: PCG-Z505R/PCG-Z505RX
Serial Number:________________________
Safety Information
t
To prevent fire or shock hazard, do
not expose your notebook computer
to rain or moisture.
t
To avoid electrical shock, do not open
the cabinet. Refer servicing to
qualified personnel only.
t
Never install modem or telephone
wiring during a lightning storm.
t
Never install telephone jacks in wet
locations unless the jack is specifically
designed for wet locations.
t
Never touch uninsulated telephone
wire or terminals unless the telephone
line has been disconnected at the
network interface.
t
Use caution when installing or
modifying telephone lines.
t
Avoid using the modem during an
electrical storm.
t
Do not use the modem or a telephone
to report a gas leak in the vicinity of
the leak.
t
A socket outlet should be as close as
possible to the unit and easily
accessible.
t
Pour prévenir tout risque d'incendie
ou d'électrocution, garder cet appareil
à l'abri de la pluie et de l'humidité.
t
Pour prévenir tout risque
d'électrocution, ne pas ouvir le châssis
de cet appareil et ne confier son
entretien qu'à une personne qualifiée.
t
L'appareil doit être le plus près
possible d'une prise murale pour en
faciliter l'accès.
Regulatory Information.
! For CD-ROM: The use of optical
instruments with the CD-ROM
drive will increase eye hazard.
WARNING
! For DVD-ROM: As the laser beam
used in the DVD-ROM drive is
harmful to the eyes, do not
attempt to disassemble the drive
cabinet. Refer servicing to
qualified personnel only.
AVERTISSEMENT
Declaration of Conformity
Trade Name: SONY
Model No: PCG-Z505R/PCG-
Z505RX
Responsible Party:
Sony Electronics Inc.
Address:
1 Sony Drive
Park Ridge, NJ 07656
Telephone No.: 201-930-6970
This device complies with Part 15 of
the FCC rules. Operation is subject
to the following two conditions: (1)
This device may not cause harmful
interference, and (2) this device
must accept any interference
received, including interference
that may cause undesired
operation.


background image
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user
is encouraged to try to correct the
interference by one or more of the
following measures:
t
Reorient or relocate the receiving
antenna.
t
Increase the separation between the
equipment and the receiver.
t
Connect the equipment into an outlet
on a circuit different from that to
which the receiver is connected.
t
Consult the dealer or an experienced
radio/TV technician for help.
You are cautioned that any changes or
modifications not expressly approved in
this manual could void your authority to
operate this equipment.
Only peripherals (computer input/output
devices, terminals, printers, etc.) that
comply with FCC Class B limits may be
attached to this computer product.
Operation with non-compliant peripherals
is likely to result in interference to radio
and television reception.
All cables used to connect peripherals must
be shielded and grounded. Operation with
cables, connected to peripherals, that are
not shielded and grounded, may result in
interference to radio and television
reception.
FCC Part 68
This equipment complies with Part 68 of
the FCC rules. On the bottom of this
equipment is a label that contains, among
other information, the FCC equivalence
number (REN) for this equipment. If
requested, this information must be
provided to the telephone company.
This modem uses the USOC RJ-11
telephone jack.
The REN is used to determine the quantity
of devices which may be connected to the
telephone line. Excessive RENs on the
telephone line may result in the devices not
ringing in response to an incoming call. In
most, but not all areas, the sum of the RENs
should not exceed five (5.0). To be certain
of the number of devices that may be
connected to the line, as determined by the
total RENs, contact the telephone company
to determine the maximum REN for the
calling area.
If the terminal equipment causes harm to
the telephone network, the telephone
company will notify you in advance that
temporary discontinuance of service may
be required. But if advance notice is not
practical, the telephone company will
notify the customer as soon as possible.
Also, you will be advised of your right to
file a complaint with the FCC if you believe
it is necessary.
The telephone company may make
changes in its facilities, equipment,
operations or procedures that could affect
the operations of the equipment. If this
happens, the telephone company will
provide advance notice in order for you to
make the necessary modifications in order
to maintain uninterrupted service.