background image
4-087-364-11 (2)
© 2001 Sony Corporation
Flat Panel Color Television
KZ-32TS1
KZ-42TS1
Operating Instructions
Mode d'emploi
Manual de instrucciones
US
FR
ES


background image
2 (US)
WARNING
To Reduce the risk of fire or shock
hazard, do not expose the TV to rain or
moisture.
This symbol is intended to alert the user to the
presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
CAUTION
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT, FULLY INSERT.
CAUTION
When using TV games, computers, and similar products with
your TV, keep the brightness and contrast functions at low
settings. If a fixed (non-moving pattern is left on the screen for
long periods of time at a high brightness or contrast setting, the
image can be permanently imprinted onto the screen.
Continuously watching the same program can cause the imprint
of station logos onto the TV screen. Theses types of imprints are
not covered by your warranty because they are the result of
misuse.
Note on Caption Vision
This television receiver provides display of television closed
captioning in accordance with §15.119 of the FCC rules.
Notes on Cleaning the TV
Clean the TV with a soft dry cloth. Never use strong solvents
such as thinner or benzine, which might damage the finish of the
cabinet.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION
RISQUE DE CHOC ELECTRIQUE,
NE PAS OUVRIR
PRECAUCION
RIESGO DE CHOQUE ELECTRICO
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
NO ABRIR
Note to CATV system installer
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
Use of this television receiver for other than private viewing of
programs broadcast on UHF, VHF, transmitted by cable
companies or satellite for the use of the general public may
require authorization from the broadcaster/cable company and/or
program owner.
NOTIFICATION
This equipment has been tested and found to comply with the
limits for a Class B digital device pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference with radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
­ Reorient or relocate the receiving antennas.
­ Increase the separation between the equipment and receiver.
­ Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
­ Consult the dealer or an experienced radio/TV technician for
help.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your warranty
and your authority to operate this equipment.
Safety
­ Operate the TV only on 120 V AC.
­ The plug is designed, for safety purposes, to fit into the wall
outlet only one way. If you are unable to insert the plug fully
into the outlet, contact your dealer.
­ If any liquid or solid object should fall inside the cabinet,
unplug the TV immediately and have it checked by qualified
service personnel before operating it further.
Installing
­ To prevent internal heat buildup, do not block the ventilation
openings.
­ Do not install the TV in a hot or humid place, or in a place
subject to excessive dust or mechanical vibration.
­ The AC power cord is attached to the rear of the TV with
hooks. Do not attempt to remove the cord from these hooks.
Doing so could cause damage to the TV.
Owner's Record
The model and serial numbers are provided on the front of this
instruction manual and at the rear of the TV. Refer to them
whenever you call upon your Sony dealer regarding this
products.


background image
(US)
3
Table of Contents
US
Table of Contents
Installing and Connecting the TV
Unpacking .......................................................... 4
Inserting Batteries into the Remote Control ... 4
Preventing the TV from Falling Down ............ 4
Connector Types ................................................ 5
Identifying Front and Rear Connectors .......... 6
Basic Connections (Connecting Cable TV or
Antenna) ........................................................ 7
Connecting directly to cable or an antenna7
Cable box connections .............................. 7
Connecting a VCR and Cable .......................... 8
Connecting a Satellite Receiver ........................ 9
Connecting a Satellite Receiver with a VCR . 10
Connecting an Audio Receiver ....................... 11
Connecting a DVD Player with Component
Video Connectors ....................................... 12
Connecting a DVD Player with A/V
Connectors .................................................. 13
Connecting a Digital TV Receiver ................. 14
Connecting a Sub Woofer ............................... 15
Connecting an RGB Equipment .................... 16
Setting the Channels ........................................ 17
Selecting the On-screen Menu Language ...... 19
Watching the TV
Watching the TV ............................................. 20
Watching with closed caption ................. 21
Enjoying High-quality Pictures and Sounds . 22
Selecting the Picture Mode ............................. 23
Selecting the Effect Mode ............................... 24
Saving the Power Consumption ..................... 25
Using the Wide Screen Mode ......................... 26
Changing the Wide Screen Mode
automatically ...................................... 26
Changing the Wide Screen Mode
manually ............................................. 27
Changing the Wide Setup ....................... 27
About Auto Wide settings ....................... 27
Setting the Video Inputs.................................. 29
Operating Video Equipment with Your TV
Remote Control .......................................... 30
Programming the remote control ............ 30
Operating optional equipment ................. 32
Using Favorite Channels ................................. 33
Setting your favorite channels ................. 33
Watching Favorite Channel .................... 34
Adjusting Your Setup
Adjusting the Picture Size/Position ................ 35
Using the Picture Control Mode Option ....... 36
Using the Sound Control Option .................... 38
Selecting Stereo or Bilingual Programs ......... 40
Using the Parental Control Feature ............... 40
Activating the Parental Control feature .. 41
Selecting a Custom Rating ...................... 43
What the Ratings Mean .................................. 45
Ratings in the U.S.A. .............................. 45
Ratings in Canada ................................... 46
Adjusting Advanced AV Setting Options ...... 48
Using the Timer
Turning Off the TV Automatically ................ 51
Setting the Current Time ................................ 52
Controlling Power On/Off Automatically ..... 53
Additional Information
Troubleshooting ............................................... 55
Self-diagnosis function ........................... 55
Trouble symptoms and remedies ............ 56
Specifications ................................................... 58
Index ................................................................. 59


background image
4 (US)
Installing and Connecting the TV
Installing and
Connecting the
TV
Bracket (supplied)
Preventing the TV from
Falling Down
Attach the supplied bracket to the rear of the TV, and
pass a sturdy cord or chain and attach it to a wall or
pillar. Consult your dealer when attaching the
bracket, since the screws for the bracket also hold the
rear cabinet in a place.
1 Remove one of the screws attached at the rear of
the TV.
Note
Do not remove both screws at the same time as these screws
secure the rear cabinet. Never use the TV with the screws
removed.
2 Attach the supplied bracket with the screw.
Note
Be sure to use the screw that attaches the rear cabinet. A
different screw may damage the TV and result in electric
shock.
3 Repeat steps 1 and 2 to attach the other bracket.
Unpacking
When you unpack this unit, make sure there is all the
following:
Cleaning cloth (1)
Operating Instructions (1)
Important Safeguards (1)
Warranty (1)
Inserting Batteries into
the Remote Control
Insert two size AA batteries (supplied) by matching
the + and ­ on the batteries to the diagram inside
the remote control's battery compartment.
Notes
· Remove the batteries to avoid damage from possible battery
leakage whenever you anticipate that the remote control will
not be used for an extended period.
· Handle the remote control with care. Avoid dropping it,
getting it wet, or placing it in direct sunlight, near a heater or
where the humidity is high.
· Your remote control can be programmed to operate most video
equipment. (See "Operating Video Equipment with Your TV
Remote Control" on page 30.)
Brackets (2)
AC power cord (1)
Do not remove
ferrite core.
Do not remove
ferrite cores.
75-ohm coaxial cable
(1)
Remote control (1) and
size AA batteries (2)


background image
(US)
5
Installing and Connecting the TV
US
4 Attach a sturdy cord or chain securely to each
bracket on the rear of the TV.
5 Attach the cord or chain to a wall or pillar.
Side view
Top view
Attach the cord
or chain
(not supplied)
securely.
Screw a hook to the wall or pillar
securely.
Connector Types
You may find it necessary to use some of the
following connector types during set up.
Supplied 75-ohm coaxial cable
Screw-on type
S VIDEO cable
High quality video cable for enhanced picture
quality
AUDIO/VIDEO cable
VIDEO- Yellow
AUDIO (Left) - White
AUDIO (Right) - Red
Some DVD players are equipped with the following
three video connectors:
Y - Green
PB (CB, Cb or B­Y) - Blue
PR (CR, Cr or R­Y) - Red
CONTROL S cable
CONTROL S connections are exclusive to Sony
equipment and allow greater control of all Sony
equipment.
Screw into connection.
Align guides and push into
connection.
Push into connection.
Push into connection.