DIGITAL VIDEOCASSETTE RECORDER
DSR-80/80P
SERVICE MANUAL
SDI OUTPUT BOARD
DSBK-100
QSDI OUTPUT BOARD
DSBK-110
DIGITAL VIDEOCASSETTE PLAYER
DSR-60/60P
SDI INPUT/OUTPUT BOARD
DSBK-120
TIME CODE INPUT/OUTPUT BOARD
DSBK-130
Vol. 1 (1st Edition/Revised 2)
DSBK-100P
DSBK-110P
DSBK-120P
DSBK-130P
1
DSR-80/80P/60/60P
MANUAL STRUCTURE
This manual is the Service Manual Vol.1 of the digital videocassette recorder
DSR-80/80P and the digital videocassette player DSR-60/60P and the option board
SDI output board DSBK-100/100P, QSDI output board DSBK-110/110P, SDI input/
output board DSBK-120/120P, time code input/output board DSBK-130/130P.
This manual contains the maintenance information of this equipment, and servicing
information necessary for parts replacement and adjustments.
In addition to this Service Manual Vol. 1, the following manuals are provided.
..... Operating Instructions (Supplied with equipment)
Parts number : 3-859-820-11 (English, for UC,CE)
3-859-820-21 (French, for UC,CE)
3-859-820-31 (German, for CE)
3-859-820-41 (Italian, for CE)
Parts number : 3-860-358-13 (English, for UC,CE)
3-860-358-23 (French, for UC,CE)
3-860-358-33 (German, for CE)
3-860-358-43 (Italian, for CE)
Explains how to operate this equipment.
..... Service Manual Vol.2 (Not supplied with equipment)
Parts number : 9-977-696-22
Contains the block diagrams, board layouts, schematic diagrams, semiconductor pin
assingments and parts lists.
Purpose of this manual
Related manuals
DSR-60/60P
DSR-80/80P
2
DSR-80/80P/60/60P
The sections covered in the manual are summarized below to give you a general
understanding of the manual.
SECTION 1
OPERATING INSTRUCTION
Describes the contents of the operating instructions.
SECTION 2
INSTALLATION
Contains rack mount information necessary for installation of the equipment, the
connector information necessary for connectiing the unit with peripherals and others.
SECTION 3
SERVICE OVERVIEW
Describes the replacement of the parts, the locations of the main parts and boards,
error code, notes and so on.
SECTION 4
MAINTENANCE MENU
Describes the maintenance menu.
SECTION 5
PERIODIC INSPECTION AND MAINTENANCE
Describes the periodic inspection and cleaning procedure.
SECTION 6
REPLACEMENT OF MECHANICAL PARTS
Describes the replacement procedures and adjustment after replacement.
SECTION 7
TAPE PATH ALIGNMENT
Describes the adjustment procedures of tape path system.
SECTION 8
ELECTRICAL ALIGNMENT OVERVIEW
Describes the general information for electrical adjustments.
SECTION 9
(This section is intentionally left blank.)
SECTION 10 ELECTRICAL ALIGNMENT
Describes the electrical adjustment of each board.
Contents
1
DSR-80/80P/60/60P
TABLE OF CONTENTS
1.
OPERATING INSTRUCTIONS
The DSR-60/60P manual will be available as a supplement shortly.
2.
INSTALLATION
2-1. Installation Procedure ..................................................................................... 2-1
2-2. Operational Environment ............................................................................... 2-1
2-3. Operating Voltage .......................................................................................... 2-1
2-4. Installation Space ........................................................................................... 2-2
2-5. Supplied Accessories ...................................................................................... 2-2
2-6. Optional Accessories ...................................................................................... 2-2
2-7. Rack Mounting ............................................................................................... 2-3
2-8. Connection of Editing Equipment,
and Input/Output Signals of Connectors ........................................................ 2-5
2-8-1.
Connection of Editing Equipment .......................................................... 2-5
2-8-2.
Matching Connectors .............................................................................. 2-9
2-8-3.
Input/Output Signals of the Connectors ............................................... 2-10
2-9. Installation Setup and Adjustment ............................................................... 2-13
2-9-1.
Switch Settings on the Connector Panel ............................................... 2-13
2-9-2.
Setting on the Front Panel Unit ............................................................ 2-13
2-9-3.
On-board Switch Setting ...................................................................... 2-14
2-9-4.
System Adjustment After Installation .................................................. 2-16
2-9-5.
Connection of Editor Controller ........................................................... 2-16
2-10. Setup Check Sheets ...................................................................................... 2-18
3.
SERVICE OVERVIEW
3-1. Location of Main Parts ................................................................................... 3-1
3-1-1.
Location of Printed Circuit Boards ......................................................... 3-1
3-1-2.
Location of Main Mechanical Parts ....................................................... 3-2
3-1-3.
Location of Sensors (1) .......................................................................... 3-4
Location of Sensors (2) .......................................................................... 3-5
3-2. Functions of Record Proof Hole and Record Proof Plug of Cassette ............ 3-6
3-3. Error Messages ............................................................................................... 3-7
3-3-1.
Alarm Display ........................................................................................ 3-7
3-3-2.
Error Codes ............................................................................................. 3-9
3-4. Removal and Attachment of the Cabinet ..................................................... 3-22
3-5. Removal and Attachemt of the Cassette Compartment ................................ 3-23
3-6. Removal of the Switching Regulator
........................................ 3-24
3-6. Removal of the Switching Regulator
........................................ 3-25
3-7. Replacement of the Fuse .............................................................................. 3-26
3-8. Extension Board ........................................................................................... 3-26
3-9. Removal and Attachment of the Boards ....................................................... 3-27
3-9-1.
Removal of the Card Boards ................................................................ 3-27
3-9-2.
Removal of the CP-276B Board
................................... 3-28
3-9-2.
Removal of the CP-276A Board
................................... 3-29
DSR-80/80P
DSR-60/60P
DSR-60/60P
DSR-80/80P
http://getMANUAL.com