background image
Register your product at:
www.pioneerelectronics.com
· Protect your new investment
The details of your purchase will be on file for reference in the event of an
insurance claim such as loss or theft.
· Improve product development
Your input helps us continue to design products that meet your needs.
· Receive a free Pioneer newsletter
Registered customers can opt in to receive a monthly newsletter.
· Receive free tips, updates and service bulletins on
your new product
HTD-645DV
XV-HTD640/S-HTD540/XW-HTD640
XV-HTD640/S-HTD630/XW-HTD630
HTD-641DV
TUNED
POWER
WIRELESS
MODE
STEREO MODE
VOLUME
CHANNEL
SURROUND
STEREO
MIN
MAX
AUTO ON/OFF
OFF
ON
AUTO
OFF
ON
wireless
Digital
speaker system
PHONES
STANDBY/ON
DOWN
VOLUME
CD MODE TIMER
UP
DVD/CD
TUNER
TV/L1/L2
FM/AM/ST.
DIRECT PLAY
DISC SKIP
EXCHANGE
OPEN/CLOSE
12
3
4
5
DISC
12
34
5
PHONES
STANDBY/ON
DOWN
VOLUME
CD MODE TIMER
UP
DVD/CD
TUNER
TV/L1/L2
FM/AM/ST.
DIRECT PLAY
DISC SKIP
EXCHANGE
OPEN/CLOSE
12
3
4
5
DISC
12
3
4
5
DVD/CD Receiver
XV-HTD640
Speaker System
S-HTD540
S-HTD630
Digital Wireless Speaker System
XW-HTD640
XW-HTD630
Operating Instructions
XV-HTD640.book 1


background image
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with arrowhead, within
an equilateral triangle, is intended to alert
the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
D1-4-2-3_En
WARNING ­ TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
D1-4-2-1_En
IMPORTANT NOTICE ­ THE SERIAL NUMBER FOR THIS EQUIPMENT IS LOCATED IN THE REAR.
PLEASE WRITE THIS SERIAL NUMBER ON YOUR ENCLOSED WARRANTY CARD AND
KEEP IN A SECURE AREA. THIS IS FOR YOUR SECURITY.
D1-4-2-6-1_En
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
­ Reorient or relocate the receiving antenna.
­ Increase the separation between the equipment and receiver.
­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
­ Consult the dealer or an experienced radio/TV technician for help.
D8-10-1-2_En
For U.S. and Australia Model
C67-7-3_En
CAUTION
­ PREVENT ELECTRIC SHOCK DO
NOT USE THIS (POLARIZED) PLUG
WITH AN EXTENSION CORD.
RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE
FULLY INSERTED TO PREVENT
BLADE EXPOSURE.
ATTENTION ­ POUR PREVENIR LES CHOCS
ELECTRIQUES NE PAS UTILISER
CETTE FICHE POLARISEE AVEC UN
PROLONGATEUR UNE PRISE DE
COURANT OU UNE AUTRE SORTIE
DE COURANT, SAUF SI LES LAMES
PEUVENT ETRE INSEREES A FOND
SANS EN LAISSER AUCUNE PARTIE
A DECOUVVERT.
D2-4-4-1_EF
Energy-saving design
This system is designed to use 0.5W of
electricity when power is switched to
standby.
[Excluding XW-HTD630/640]
[For Canadian model only] [Pour le modèle Canadien]
XV-HTD640.book 2


background image
READ INSTRUCTIONS -- All the safety and
operating instructions should be read before the
product is operated.
RETAIN INSTRUCTIONS -- The safety and
operating instructions should be retained for
future reference.
HEED WARNINGS -- All warnings on the product
and in the operating instructions should be
adhered to.
FOLLOW INSTRUCTIONS -- All operating and use
instructions should be followed.
CLEANING -- The product should be cleaned only
with a polishing cloth or a soft dry cloth. Never
clean with furniture wax, benzine, insecticides
or other volatile liquids since they may corrode
the cabinet.
ATTACHMENTS -- Do not use attachments not
recommended by the product manufacturer as
they may cause hazards.
WATER AND MOISTURE -- Do not use this
product near water -- for example, near a
bathtub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming
pool; and the like.
ACCESSORIES -- Do not place this product on an
unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a
child or adult, and serious damage to the
product. Use only with a cart, stand, tripod,
bracket, or table recommended by the
manufacturer, or sold with the product. Any
mounting of the product should follow the
manufacturer's instructions, and should use a
mounting accessory recommended by the
manufacturer.
CART -- A product and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the product
and cart combination to overturn.
VENTILATION -- Slots and openings in the cabinet
are provided for ventilation and to ensure
reliable operation of the product and to protect
it from overheating, and these openings must
not be blocked or covered. The openings should
never be blocked by placing the product on a
bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided or the
manufacturer's instructions have been adhered
to.
POWER SOURCES -- This product should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your product dealer or local power
company.
LOCATION ­ The appliance should be installed in a
stable location.
NONUSE PERIODS ­ The power cord of the
appliance should be unplugged from the outlet
when left un-used for a long period of time.
GROUNDING OR POLARIZATION
· If this product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other), it will fit into the
outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
· If this product is equipped with a three-wire
grounding type plug, a plug having a third
(grounding) pin, it will only fit into a grounding
type power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
grounding type plug.
POWER-CORD PROTECTION -- Power-supply
cords should be routed so that they are not likely
to be walked on or pinched by items placed
upon or against them, paying particular
attention to cords at plugs, convenience
receptacles, and the point where they exit from
the product.
OUTDOOR ANTENNA GROUNDING -- If an
outside antenna or cable system is connected to
the product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and built-up
static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of
the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of
antenna-discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode. See Figure A.
LIGHTNING -- For added protection for this
product during a lightning storm, or when it is
left unattended and unused for long periods of
time, unplug it from the wall outlet and
disconnect the antenna or cable system. This
will prevent damage to the product due to
lightning and power-line surges.
POWER LINES -- An outside antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power
circuits, or where it can fall into such power
lines or circuits. When installing an outside
antenna system, extreme care should be taken
to keep from touching such power lines or
circuits as contact with them might be fatal.
OVERLOADING -- Do not overload wall outlets,
extension cords, or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
OBJECT AND LIQUID ENTRY -- Never push
objects of any kind into this product through
openings as they may touch dangerous voltage
points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any
kind on the product.
SERVICING -- Do not attempt to service this
product yourself as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
DAMAGE REQUIRING SERVICE -- Unplug this
product from the wall outlet and refer servicing
to qualified service personnel under the
following conditions:
· When the power-supply cord or plug is
damaged.
· If liquid has been spilled, or objects have fallen
into the product.
· If the product has been exposed to rain or water.
· If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation.
· If the product has been dropped or damaged in
any way.
· When the product exhibits a distinct change in
performance -- this indicates a need for service.
REPLACEMENT PARTS -- When replacement parts
are required, be sure the service technician has
used replacement parts specified by the
manufacturer or have the same characteristics
as the original part. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
SAFETY CHECK -- Upon completion of any service
or repairs to this product, ask the service
technician to perform safety checks to
determine that the product is in proper
operating condition.
WALL OR CEILING MOUNTING -- The product
should not be mounted to a wall or ceiling.
HEAT -- The product should be situated away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers)
that produce heat.
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC -- NATIONAL ELECTRICAL CODE
Fig. A
IMPORTANT SAFETY INSTRUCTIONS
D1-4-2-2_En
XV-HTD640.book 3


background image
This product is for general household purposes.
Any failure due to use for other than household
purposes (such as long-term use for business
purposes in a restaurant or use in a car or ship)
and which requires repair will be charged for
even during the warranty period.
K041_En
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
D8-10-1-3_EF
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate
the equipment.
D8-10-2_En
CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION : THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD. D6-8-2-1_En
[For XW-HTD630 and XW-HTD640 only]
[For U.S. model]
Changes or modifications not expressly
approved by the manufacturer (party
responsible) for Compliance could not void
the user's authority to operate the equipment.
[For Canadian model]
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must accept
any interference, including interference that
may cause undesired operation of the device.
[Pour le modèle Canadien]
L'utilisation de l'appareil est soumise aux deux
conditions suivantes: (1) il ne provoque pas de
brouillage, et (2) il peut supporter tous les
brouillages, y compris ceux qui sont en mesure
de provoquer une anomalie de fonc-tionnement
de l'appareil.
[For Canadian model]
To prevent radio interference to the licensed ser-
vice, this device is intended to be operated in-
doors and away from windows to provide maxi-
mum shielding. Equipment (or its transmit an-
tenna) that is installed outdoors is subject to li-
censing.
[Pour le modèle Canadien]
Pour éviter le brouillage radioélectrique des
émetteurs ayant une licence, cet appareil doit
être utilisé à l'intérieur des habitations et loin
des fenêtres de manière à assurer la protec-tion
maximale. Un équipement (ou son antenne
d'émission) lorsqu'il est installé à l'extérieur ne
peut être utilisé qu'après obten-tion d'une licence.
WARNING: Handling the cord on this product or
cords associated with accessories sold with the
product will expose you to lead, a chemical known to
the State of California and other governmental
entities to cause cancer and birth defects or other
reproductive harm.
D36-P4_En
Wash hands after handling
[Excluding XW-HTD630/640] [For Canadian model only] [Pour le modèle Canadien]
XV-HTD640.book 4


background image
5
En
Thank you for buying this Pioneer product.
Please read through these operating instructions so that you will know how to operate your model
properly. After you have finished reading the instructions, put them in a safe place for future
reference.
Contents
01 Before you start
Features
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
What's in the box
. . . . . . . . . . . . . . . . . . . . . 8
Putting the batteries in the remote
control
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using the remote control
. . . . . . . . . . . . . . 9
Disc / content format playback
compatibility
. . . . . . . . . . . . . . . . . . . . . . . . 9
CD-R/RW compatibility
. . . . . . . . . . . . . . 10
DVD-R/RW compatibility
. . . . . . . . . . . . . 10
PC-created disc compatibility
. . . . . . . . . 10
Compressed audio compatibility
. . . . . . . 10
JPEG file compatibility
. . . . . . . . . . . . . . . 10
02 Connecting up
Connecting the speakers and wireless
speaker system
. . . . . . . . . . . . . . . . . . . . . 11
Placing the speakers
. . . . . . . . . . . . . . . . . 13
Placing the wireless speaker system
. . . . . 14
Wall-mounting the center and surround
speaker system
. . . . . . . . . . . . . . . . . . . . 15
Connecting to your TV
. . . . . . . . . . . . . . . . 16
Connecting using the S-video output
. . . . 16
Connecting using the component video
output
. . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Listening to TV audio through this
system
. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Using this unit with a Pioneer plasma
display
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Using the SR+ mode with a Pioneer
plasma display
. . . . . . . . . . . . . . . . . . . . . 19
Connecting the supplied antennas
. . . . . . . 20
Assembling the loop antenna
. . . . . . . . . 20
AM loop antenna
. . . . . . . . . . . . . . . . . . . 20
FM wire antenna
. . . . . . . . . . . . . . . . . . . 21
Connecting the power
. . . . . . . . . . . . . . . . 21
03 Controls and displays
Front panel
. . . . . . . . . . . . . . . . . . . . . . . . 22
Display
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Remote control
. . . . . . . . . . . . . . . . . . . . . 25
Transmitter (HTD-645DV)
. . . . . . . . . . . . . . 28
Wireless speaker (HTD-645DV)
. . . . . . . . . 28
04 Getting started
Switching on and setting up
. . . . . . . . . . . 30
Setting the clock
. . . . . . . . . . . . . . . . . . . 31
Using the Room Setup
. . . . . . . . . . . . . . . . 31
Setting up the remote to control
your TV
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Using the on-screen displays
. . . . . . . . . . . 33
Playing discs
. . . . . . . . . . . . . . . . . . . . . . . 33
Basic playback controls
. . . . . . . . . . . . . 34
Resume and Last Memory
. . . . . . . . . . . . 35
Changing discs
. . . . . . . . . . . . . . . . . . . . . 36
DVD-Video disc menus
. . . . . . . . . . . . . . 37
Video CD PBC menus
. . . . . . . . . . . . . . . . 38
Listening to the radio
. . . . . . . . . . . . . . . . . 39
Improving poor FM reception
. . . . . . . . . 39
Memorizing stations
. . . . . . . . . . . . . . . . 40
Listening to station presets
. . . . . . . . . . . 40
Listening to other sources
. . . . . . . . . . . . . 40
Using the wireless speaker system
. . . . . . 41
05 Listening to your system
About the listening modes
. . . . . . . . . . . . . 43
Auto listening mode
. . . . . . . . . . . . . . . . . 43
Listening in surround sound
. . . . . . . . . . . 44
Dolby Pro Logic II Music settings
. . . . . . 44
Using the Advanced Surround effects
. . . . 45
Using Front Surround
. . . . . . . . . . . . . . . . 45
Adjusting the Advanced and Front
Surround effect level
. . . . . . . . . . . . . . . . 46
Listening in stereo
. . . . . . . . . . . . . . . . . . . 46
Listening with headphones
. . . . . . . . . . . . 46
XV-HTD640.book 5