Operating Instructions
Mode d'emploi
STEREO CD CASSETTE DECK RECEIVER
AMPLI-TUNER/LECTEUR CD/
DOUBLE PLATINE A CASSETTE
XR-A790
XR-A3900
XR-A390
SPEAKER SYSTEM
ENCEINTES ACOUSTIQUES
S-A790VLR
S-A3900
S-A390
2
En/Fr
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
THE STANDBY/ON BUTTON IS SECONDARY CONNECTED
AND THEREFORE DOES NOT SEPARATE THE UNIT FROM
MAINS POWER IN STANDBY POSITION.
[For Canadian model]
This Class B digital apparatus complies with Canadian
ICES-003.
IMPORTANT NOTICE
[For Canadian model]
CAUTION:
TO PREVENT ELECTRIC SHOCK DO
NOT USE THIS (POLARIZED) PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
ATTENTION: AFIN DE PREVENIR TOUS RISQUES
DE CHOC ELECTRIQUE OU DE DEBUT D'ENCENDIE,
NE PAS EXPOSER CET APPAREIL A L'HUMIDITE OU A
LA PLUIE.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).
NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
IMPORTANT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
LE BOUTON STANDBY/ON EST RACCORDE
SECONDAIREMENT ET PAR CONSEQUENT NE SEPARE
PAS L'APPAREIL DE L'ALIMENTATION SECTEUR SUR LA
POSITION D'ATTENTE.
[Pour le modèle Canadien]
Cet appareil numérique de la Classe B est conforme à la
norme NMB-003 du Canada.
REMARQUE IMPORTANTE
Le numéro de série de cet appareil se trouve sur son
panneau arrière. Pour s'y référer en cas de besoin,
prière d'inscrire ce numéro sur la carte de garantie
inclue et de la conserver dans un endroit sûr.
ATTENTION: POUR PREVENIR LES CHOCS
ELECTRIQUES NE PAS UTILISER CETTE FICHE
POLARISEE AVEC UN PROLONGATEUR, UNE PRISE
DE COURANT OU UNE AUTRE SORTIE DE
COURANT, SAUF SI LES LAMES PEUVENT ETRE
INSERESS A FOND SANS EN LAISSER AUCUNE
PARTIE A DECOUVERT.
3
En
READ INSTRUCTIONS -- All the safety and
operating instructions should be read before
the product is operated.
RETAIN INSTRUCTIONS -- The safety and
operating instructions should be retained for
future reference.
HEED WARNINGS -- All warnings on the product
and in the operating instructions should be
adhered to.
FOLLOW INSTRUCTIONS -- All operating and
use instructions should be followed.
CLEANING -- Unplug this product from the wall
outlet before cleaning. The product should be
cleaned only with a polishing cloth or a soft dry
cloth. Never clean with furniture wax, benzine,
insecticides or other volatile liquids since they
may corrode the cabinet.
ATTACHMENTS -- Do not use attachments not
recommended by the product manufacturer as
they may cause hazards.
WATER AND MOISTURE -- Do not use this
product near water -- for example, near a
bathtub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming
pool; and the like.
ACCESSORIES -- Do not place this product on an
unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to
a child or adult, and serious damage to the
product. Use only with a cart, stand, tripod,
bracket, or table recommended by the
manufacturer, or sold with the product. Any
mounting of the product should follow the
manufacturer's instructions, and should use a
mounting accessory recommended by the
manufacturer.
CART -- A product and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the product
and cart combination to overturn.
IMPORTANT SAFETY INSTRUCTIONS
VENTILATION -- Slots and openings in the cabinet
are provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be
blocked or covered. The openings should never
be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should
not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have
been adhered to.
POWER SOURCES -- This product should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your product dealer or local power
company.
LOCATION The appliance should be installed
in a stable location.
NONUSE PERIODS The power cord of the
appliance should be unplugged from the
outlet when left unused for a long period of
time.
GROUNDING OR POLARIZATION
÷
If this product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other), it will fit into the outlet
only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
polarized plug.
÷
If this product is equipped with a three-wire
grounding type plug, a plug having a third
(grounding) pin, it will only fit into a grounding type
power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact
your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the grounding
type plug.
POWER-CORD PROTECTION -- Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords
at plugs, convenience receptacles, and the point
where they exit from the product.
OUTDOOR ANTENNA GROUNDING -- If an outside
antenna or cable system is connected to the
product, be sure the antenna or cable system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA
70, provides information with regard to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode. See Figure A.
LIGHTNING -- For added protection for this product
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage
to the product due to lightning and power-line
surges.
POWER LINES -- An outside antenna system should
not be located in the vicinity of overhead power
lines or other electric light or power circuits, or
where it can fall into such power lines or circuits.
When installing an outside antenna system,
extreme care should be taken to keep from
touching such power lines or circuits as contact
with them might be fatal.
OVERLOADING -- Do not overload wall outlets,
extension cords, or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
OBJECT AND LIQUID ENTRY -- Never push
objects of any kind into this product through
openings as they may touch dangerous voltage
points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any
kind on the product.
SERVICING -- Do not attempt to service this
product yourself as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
DAMAGE REQUIRING SERVICE -- Unplug this
product from the wall outlet and refer servicing
to qualified service personnel under the
following conditions:
÷
When the power-supply cord or plug is
damaged.
÷
If liquid has been spilled, or objects have fallen
into the product.
÷
If the product has been exposed to rain or
water.
÷
If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation.
÷
If the product has been dropped or damaged in
any way.
÷
When the product exhibits a distinct change in
performance -- this indicates a need for service.
REPLACEMENT PARTS -- When replacement
parts are required, be sure the service technician
has used replacement parts specified by the
manufacturer or have the same characteristics
as the original part. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
SAFETY CHECK -- Upon completion of any service
or repairs to this product, ask the service
technician to perform safety checks to
determine that the product is in proper operating
condition.
WALL OR CEILING MOUNTING -- The product
should not be mounted to a wall or ceiling.
HEAT -- The product should be situated away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers)
that produce heat.
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC
SERVICE
EQUIPMENT
NEC -- NATIONAL ELECTRICAL CODE
Fig. A
4
En/Fr
·A
S
S O C I A TIO
N
·
E
L
E
C
T
R
O
NI
C IND
U
S
T
R
IE
S
EST
1924
We
Want You
LISTENING
For A Lifetime
Selecting fine audio equipment such as the unit you've just
purchased is only the start of your musical enjoyment. Now
it's time to consider how you can maximize the fun and
excitement your equipment offers. This manufacturer and the
Electronic Industries Association's Consumer Electronics
Group want you to get the most out of your equipment by
playing it at a safe level. One that lets the sound come through
loud and clear without annoying blaring or distortion-and,
most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing "comfort
level" adapts to higher volumes of sound. So what sounds
"normal" can actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level
BEFORE your hearing adapts.
To establish a safe level:
÷ Start your volume control at a low setting.
÷ Slowly increase the sound until you can hear it comfortably
and clearly, and without distortion.
Once you have established a comfortable sound level:
÷ Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing
damage or loss in the future. After all, we want you listening
for a lifetime.
We Want You Listening ForALifetime
Used wisely, your new sound equipment will provide a
lifetime of fun and enjoyment. Since hearing damage from
loud noise is often undetectable until it is too late, this
manufacturer and the Electronic Industries Association's
Consumer Electronics Group recommend you avoid prolonged
exposure to excessive noise. This list of sound levels is
included for your protection.
Information courtesy of the Deafness Research Foundation.
90
Subway, motorcycle, truck traffic, lawn mower
100
Garbage truck, chain saw, pneumatic drill
120
Rock band concert in front of speakers, thunderclap
140
Gunshot blast, jet plane
180
Rocket launching pad
THE FOLLOWING NOISES CAN BE
DANGEROUS UNDER CONSTANT EXPOSURE
30
Quiet library, soft whispers
40
Living room, refrigerator, bedroom away from traffic
50
Light traffic, normal conversation, quiet office
60
Air conditioner at 20 feet, sewing machine
70
Vacuum cleaner, hair dryer, noisy restaurant
80
Average city traffic, garbage disposals, alarm clock
at two feet.
Decibel
Level
Example
·A
S
S O C I A TIO
N
·
E
L
E
C
T
R
O
NI
C IND
U
S
T
R
IE
S
EST
1924
We
Want You
LISTENING
For A Lifetime
[For Australian model]
CAUTION
This product contains a laser diode of higher class than 1.
To ensure continued safety, do not remove any covers or
attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
The following caution label appears on your unit.
Location: rear of the unit
CLASS 1
LASER PRODUCT
This product is for general household purposes. Any failure
due to use for other than household purposes (such as long-
term use for business purposes in a restaurant or use in a
car or ship) and which requires repair will be charged for
even during the warranty period.
Ce lecteur est un produit grand public destiné à un usage
domestique. Si vous l'utilisez à d'autres fins (par exemple,
pour la sonorisation d'un restaurant, ou bien dans un
véhicule ou un bateau), les réparations éventuelles vous
seront facturées, même s'il est encore sous garantie.
5
En
Thank you for buying this Pioneer product.
Please read through these operating instructions so you
will know how to operate your model properly. After you
have finished reading the instructions, put them away in
a safe place for future reference.
In some countries or regions, the shape of the power
plug and power outlet may differ from that shown in the
explanatory drawings. However, the method of con-
necting and operating the unit is the same.
Energy-saving design
This system is designed to use 1 W of electricity
when power is switched to Standby.
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug
by tugging the cord and never touch the power cord when
your hands are wet as this could cause a short circuit or
electric shock. Do not place the unit, a piece of furniture,
etc., on the power cord, or pinch the cord. Never make a
knot in the cord or tie it with other cords. The power cords
should be routed such that they are not likely to be stepped
on. A damaged power cord can cause a fire or give you an
electrical shock. Check the power cord once in a while.
When you find it damaged, ask your nearest PIONEER
authorized service center or your dealer for a replacement.
Contents
1 Before You Start
Checking what's in the box ................................. 7
Using this manual .............................................. 7
Putting the batteries in the remote ..................... 7
Using the remote control ................................... 8
Finding a suitable location ................................. 8
Avoiding condensation problems ..................... 9
Moving the system unit ...................................... 9
Discs compatible with this system ....................... 9
2 Connecting Up
The rear panel ................................................. 10
Connecting the speakers ................................... 11
Connecting the front speakers ........................ 11
Connecting the Super Woofer speakers .......... 11
Connecting the rear speakers ......................... 12
Placing the speakers ....................................... 12
Connecting the radio antennas ........................ 13
Connecting external antennas ......................... 14
Connecting auxiliary components ..................... 14
Connecting the power ....................................... 15
Switching the demo mode on/off ...................... 15
3 Controls & Displays
Front panel ....................................................... 16
Display ............................................................. 18
Remote control ................................................. 19
4 Getting Started
Switching on and setting the clock ................... 20
Playing CDs ..................................................... 21
Summary of playback controls for CDs .......... 22
Changing discs ................................................. 23
Tuning in stations ............................................. 24
Improving poor FM reception ......................... 24
Playing cassette tapes ...................................... 25
Resetting the tape counter ............................. 27
Relay play ...................................................... 27
5 More CD Features
Programming a playlist ..................................... 28
Using repeat play ............................................. 29
Using random play ........................................... 29
6 More Tuner Features
Saving stations for quick recall ......................... 30
Listening to station presets ............................ 31
Changing the frequency step ............................ 31
7 Recording Cassette tapes
Making tape recordings .................................... 32
Automatically recording CDs ......................... 34
Copying tapes ............................................... 35
Improving AM tape recordings ....................... 35
8 Singing Karaoke
Singing karaoke ............................................... 36
9 Using Sound Effects
Using the sound morph .................................... 37
Using preset effects ......................................... 37
Audio preset mode ........................................ 37
Surround preset mode ................................... 37
Changing sound presets using the remote ...... 38
Using individual sound effects .......................... 38
Equalizer mode .............................................. 38
Zoom Surround mode ................................... 39
P.Bass mode ................................................... 39
Changing sound effects using the remote ....... 39
Saving your own settings .................................. 40
Changing the sound display ............................. 40
Muting the sound ............................................. 40
10 Using the Timer
Setting the wake-up timer ................................ 41
Setting the sleep timer ..................................... 42
Setting the record timer ................................... 42
Canceling the timer ......................................... 43
11 Additional Information
Taking care of your system............................... 44
Disc lens cleaner ............................................ 44
Taking care of your discs .................................. 44
Storing discs .................................................. 45
Discs to avoid ................................................ 45
Using cassette tapes ......................................... 46
Tapes you should avoid .................................. 46
Protecting your recordings ............................ 46
Troubleshooting ............................................... 47
Specifications .................................................. 49