Operating Instructions
AUDIO/VIDEO MULTI-CHANNEL
RECEIVER
VSX-C402
vsx-c402_MY.book 1
Thank you for buying this Pioneer product.
Please read through these operating instructions so
you will know how to operate your model properly.
After you have finished reading the instructions, put
them away in a safe place for future reference.
In some countries or regions, the shape of the power
plug may sometimes differ from that shown in the
explanatory drawings. However, the method of con-
necting and operating the unit is the same.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
IMPORTANT
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
D3-4-2-1-1_En
Do not connect either wire to the earth terminal of a
three pin plug.
NOTE
After replacing or changing a fuse, the fuse cover in
the plug must be replaced with a fuse cover which
corresponds to the colour of the insert in the base
of the plug or the word that is embossed on the
base of the plug, and the appliance must not be
used without a fuse cover. If lost replacement fuse
covers can be obtained from your dealer.
Only 5 A fuses approved by B.S.I or A.S.T.A to
B.S.1362 should be used.
D3-4-2-1-2-2_En
The wires in this mains lead are coloured in
accordance with the following code:
Blue
: Neutral
Brown : Live
If the plug provided is unsuitable for your socket
outlets, the plug must be cut off and a suitable plug
fitted.
IMPORTANT
FOR USE IN THE UNITED
KINGDOM
The cut-off plug should be disposed of and must
not be inserted into any 13 amp socket as this can
result in electric shock. The plug or adaptor or the
distribution panel should be provided with 5 A fuse.
As the colours of the wires in the mains lead of this
appliance may not correspond with coloured
markings identifying the terminals in your plug,
proceed as follows ;
The wire which is coloured blue must be connected
to the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be
connected to the terminal which is marked with the
letter L or coloured red.
Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified
service personnel.
WARNING: The apparatus is not waterproofs, to
prevent fire or shocks hazard, do not expose this
apparatus to rain or moisture and do not put any
water source near this apparatus, such as vase,
flower pot, cosmetics container and medicine
bottle etc.
D3-4-2-1-3_En
The STANDBY/ON switch is secondary connected
and therefore, does not separate the unit from mains
power in STANDBY position. Therefore install the
unit suitable places easy to disconnect the MAINS
plug in case of the accident. The MAINS plug of unit
should be unplugged from the wall socket when left
unused for a long period of time.
D3-4-2-2-2a_En
This product is for general household purposes.
Any failure due to use for other than household
purposes (such as long-term use for business
purposes in a restaurant or use in a car or ship)
and which requires repair will be charged for even
during the warranty period.
K041_En
WARNING:
BEFORE PLUGGING IN THE UNIT FOR THE FIRST
TIME, READ THE FOLLOWING SECTION CAREFULLY.
The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit
will be used meets the required voltage (e.g., 230V
or 120V) written on the rear panel.
D3-4-2-1-4_En
WARNING: No naked flame sources, such as
lighted candle, should be placed on the apparatus.
If naked flame sources accidentally fall down, fire
spread over the apparatus then may cause fire.
D3-4-2-1-7a_En
CAUTION
The POWER switch does not completely separates
the unit from the MAINS in off position. Therefore
install the unit suitable places easy to disconnect
the MAINS plug in case of the accident. The MAINS
plug of unit should be unplugged from the wall
socket when left unused for a long period of time.
D3-4-2-2-2b_En
Operating Environment
Operating environment temperature and humidity:
+5 ºC +35 ºC (+41 ºF +95 ºF); less than 85 %RH
(cooling vents not blocked)
Do not install in the following locations
· Location exposed to direct sunlight or strong artificial
light
· Location exposed to high humidity, or poorly
ventilated location
D3-4-2-1-7c_En
VENTILATION: When installing this unit, make
sure to leave space around the unit for ventilation
to improve heat radiation (at least 20 cm at top, 50
cm at rear, and 10 cm at each side).
WARNING: Slot and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, to prevent fire hazard, the openings
should never be blocked and covered with items,
such as newspapers, table-cloths, curtains, etc. Also
do not put the apparatus on the thick carpet, bed,
sofa, or fabric having a thick pile.
D3-4-2-1-7b_En
This product complies with the Low Voltage Directive
(73/23/EEC, amended by 93/68/EEC), EMC Directives
(89/336/EEC, amended by 92/31/EEC and
93/68/EEC).
D3-4-2-1-9a_En
vsx-c402_MY.book 2
Before you start
3
En
English
Before you start
Checking the supplied accessories
Please check that you've received the following supplied
accessories:
· AM loop antenna
· FM wire antenna
· Power cable
· Dry cell batteries (AA Size / IEC R6P) x2
· Remote control unit
· Operating instructions
· Speaker cable labels
· Warranty card
Loading the batteries
The remote control operates on two AA batteries
(supplied).
· Incorrect use of batteries may result in such hazards
as leakage and bursting. Observe the following
precautions:
· Never use new and old batteries together.
· Insert the plus and minus sides of the batteries
properly according to the marks in the battery case.
· Batteries of the same shape may have different
voltages. Do not use different batteries together.
· When disposing of used batteries, please comply
with governmental regulations or environmental
public institution's rules that apply in your country or
area.
Ventilation
· When installing this unit, make sure to leave space
around the unit for ventilation to improve heat
dispersal (at least 20 cm at the top, 50 cm at the rear,
and 10 cm at each side). If not enough space is
provided between the unit and walls or other
equipment, heat will build up inside, interfering with
performance and/or causing malfunctions. See
below for exceptions to this.
· Don't place anything on top of the receiver except for
a Pioneer DV-464, 360, 454, 350, 444, 474 or 545 DVD
player. If you do place one of these pieces of
equipment on top of the receiver be sure to leave the
ventilation space over it as prescribed above.
· If using a rack to hold the receiver make sure the
back of the rack and the left side are open.
· Also, if you're using a case with doors, leave the
doors open when using the receiver.
· Do not place on a thick carpet, bed, sofa or fabric
having a thick pile. Do not cover the receiver with
fabric or other covering. Anything that blocks
ventilation will cause the internal temperature to rise,
which may lead to breakdown or fire hazard.
· The receiver may become hot while in use, please
take care around it.
Maintenance of external surfaces
· Use a polishing cloth or dry cloth to wipe off dust and
dirt.
· When the surfaces are dirty, wipe with a soft cloth
dipped in some neutral cleanser diluted five or six
times with water, and wrung out well, and then wipe
again with a dry cloth. Do not use furniture wax or
cleansers.
· Never use thinners, benzine, insecticide sprays or
other chemicals on or near this unit, since these will
corrode the surfaces.
1
2
3
vsx-c402_MY.book 3
4
En
Contents
Before you start
Checking the supplied accessories
. . . . . . . . . . . . . . 3
Loading the batteries
. . . . . . . . . . . . . . . . . . . . . . . . . 3
Ventilation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Maintenance of external surfaces
. . . . . . . . . . . . . . . . 3
01 Quick start guide
Introduction
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Easy Setup
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Connecting speakers
. . . . . . . . . . . . . . . . . . . . . . . . 5
Connecting your TV and DVD player
. . . . . . . . . . . . . 6
Switching on and playing a DVD
. . . . . . . . . . . . . . . . 6
02 Introductory information
Introduction to home theater
. . . . . . . . . . . . . . . . . . . 7
Features
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
03 Connecting your equipment
Rear panel
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
The AV Direct mode
. . . . . . . . . . . . . . . . . . . . . . . . . 9
Installing the receiver
. . . . . . . . . . . . . . . . . . . . . . . . . 9
When making cable connections
. . . . . . . . . . . . . . . . 9
Connecting a DVD player and TV
. . . . . . . . . . . . . . . 10
Connecting a TV with a built-in digital TV tuner
. . . 10
Connecting a satellite/cable receiver or other set-top
box
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting other video components
. . . . . . . . . . . . 12
Connecting equipment to the front panel inputs
. . . 13
Installing your speaker system
. . . . . . . . . . . . . . . . . 13
Connecting the speakers
. . . . . . . . . . . . . . . . . . . . 14
Placing the speakers
. . . . . . . . . . . . . . . . . . . . . . . 14
Connecting antennas
. . . . . . . . . . . . . . . . . . . . . . . . 15
AM loop antenna
. . . . . . . . . . . . . . . . . . . . . . . . . . 15
FM wire antenna
. . . . . . . . . . . . . . . . . . . . . . . . . . 15
Connecting external antennas
. . . . . . . . . . . . . . . . 15
Using this receiver with a Pioneer plasma display
. . 16
Plugging in the receiver
. . . . . . . . . . . . . . . . . . . . . . 17
04 Controls and displays
Front panel
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Display
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Remote control
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Operating range of the remote control
. . . . . . . . . . 21
05 Getting started
Using the Room Setup
. . . . . . . . . . . . . . . . . . . . . . . 22
Checking the settings on your DVD (or other)
player
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Playing a source
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
06 Home theater sound
Playing multichannel sources
. . . . . . . . . . . . . . . . . 24
Playing stereo sources
. . . . . . . . . . . . . . . . . . . . . . . 24
Listening with headphones
. . . . . . . . . . . . . . . . . . . . 24
Using the Advanced Surround effects
. . . . . . . . . . . 25
Using the Sound Modes
. . . . . . . . . . . . . . . . . . . . . . 25
Enhancing dialog
. . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Listening with virtual surround back speakers
. . . . . 25
07 Using the tuner
Finding a station
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
MPX mode
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
RF attenuator mode
. . . . . . . . . . . . . . . . . . . . . . . . 26
Tuning directly to a station
. . . . . . . . . . . . . . . . . . . . 26
Memorizing station presets
. . . . . . . . . . . . . . . . . . . 26
Naming station presets
. . . . . . . . . . . . . . . . . . . . . 27
Listening to memorized station presets
. . . . . . . . . 27
Radio Data System (RDS)
. . . . . . . . . . . . . . . . . . . . . 27
Displaying RDS information
. . . . . . . . . . . . . . . . . . 28
Searching for RDS programs
. . . . . . . . . . . . . . . . . 28
Enhanced Other Network (EON)
. . . . . . . . . . . . . . . . 29
Program identification function
. . . . . . . . . . . . . . . 29
08 Using other functions
Selecting the input signal type
. . . . . . . . . . . . . . . . . 30
Using the sleep timer
. . . . . . . . . . . . . . . . . . . . . . . . 30
Resetting the system
. . . . . . . . . . . . . . . . . . . . . . . . 31
Default receiver settings
. . . . . . . . . . . . . . . . . . . . 31
09 The System Setup menu
Making receiver settings from the System Setup
menu
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Setup menu options
. . . . . . . . . . . . . . . . . . . . . . . . 32
SR+ control for Pioneer plasma displays
. . . . . . . . 34
Using the SR+ mode with a Pioneer plasma
display
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Setting individual channel levels
. . . . . . . . . . . . . . 35
10 Controlling other equipment
Using the remote control with other components
. . . 36
Recalling preset codes
. . . . . . . . . . . . . . . . . . . . . . 37
Resetting all remote control settings
. . . . . . . . . . . 37
VCR / DVD / LD player and DVD recorder controls
.38
Cable TV / satellite TV / digital TV / TV controls
. . . . 39
Preset code list
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
11 Additional information
Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Surround sound formats
. . . . . . . . . . . . . . . . . . . . . 43
Dolby Digital
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Dolby Pro Logic II and Dolby Surround
. . . . . . . . . . 43
DTS Digital Surround
. . . . . . . . . . . . . . . . . . . . . . . 43
Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
vsx-c402_MYTOC.fm 4
Quick start guide
01
5
En
English
Chapter 1
Quick start guide
Introduction
This `Quick start guide' shows you how to connect your
speakers, TV and DVD player to this receiver, and also
takes you through switching on and playing a DVD disc.
Easy Setup
This section shows you how to connect your speakers,
subwoofer, DVD player and TV to this receiver so you can
start enjoying home cinema sound right away.
Before you start, make sure everything you're connecting
is switched off and unplugged.
Connecting speakers
This receiver has speaker terminals for front left and right
speakers (L and R in the diagram), a center speaker (C)
and two surround speakers (RS and LS). The minimum
speaker configuration is just the front left/right speakers,
but we recommend connecting all five if possible. Note
that surround speakers should always be connected as a
pair; do not connect just one surround speaker. All the
speakers you use should have a nominal impedance
between 616.
1
Connect your speakers to the receiver, as shown
in the diagram below.
Prepare the speaker cable by stripping about 1 cm of the
plastic shielding from each speaker wire.
Connect the front speakers to the FRONT L/R terminals;
the center speaker to the CENTER terminal; and the
surround speakers to the SURROUND L/R terminals.
Press on a tab to open a terminal; insert the exposed
wire, then release the tab to secure.
For correct sound it's important that the positive and
negative terminals of the receiver and each speaker are
matched. To help you do this, attach the supplied colored
self-adhesive labels to one half of each speaker cable.
2
Connect a powered subwoofer to the
SUBWOOFER OUT jack, as shown in the diagram
below.
Use a standard audio cable with RCA/phono plugs.
· For XW-HTD525 wireless speaker system only: The
SURROUND PREOUT terminal is intended for use
with a wireless speaker system. See your wireless
speaker manual for more details on connecting up.
COAX
CONTROL
AV CONNECTOR
AC IN
DVD IN
STB IN
VIDEO IN/OUT
DVR/TV IN/OUT
FMUNBAL75
AM LOOP
ANTENNA
IN
OUT
SUB
WOOFER
OUT
STB
(DVD)
OPT1
DVR/TV
OPT2
DVD
(STB)
DIGITAL IN
CENTER
L
R
L
R
FRONT
SURROUND
SPEAKERS
PREOUT
SURROUND
PREOUT
LINE LEVEL
VSX-C402
RL
C
RS
LS
SW
vsx-c402_MY.book 5