ORDER NO.
PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 501 Orchard Road, #10-00 Wheelock Place, Singapore 238880
PIONEER ELECTRONIC CORPORATION 1998
RRV2024
T-ZZW SEPT. 1998 Printed in Japan
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
SPEAKER SYSTEM
S-VS77LV-WR
XJI/CN
The network assy is attached to the back board of the cabinet
by press-fitting. To detach the network assy, strike the cord-
stopper of the network assy with a hammer from inside of the
cabinet. To attach the network assy, replace it on the back
board of the cabinet correctly by press-fitting.
When exchange the tweeter, do it with the cosmetic baffle
assy.
The grille is united with the baffle, therefore cannot be sepa-
rated.
The baffle is attached to the cabinet by 4 external screws.
The speaker is attached to the baffle by 4 internal screws.
To detach it, first remove the baffle. Then remove the speaker.
When attaching it, face its terminal rightward.
The cosmetic baffle assy is attached to the cabinet by 4 external
screws. To detach the cosmetic baffle assy, loosen these
screws. Then carefully disconnect the wires of the woofer and
mid-range mounted on the cosmetic baffle assy. To attach the
cosmetic baffle assy, replace it on the cabinet correctly and se-
cure with 4 screws.
The woofer is attached to the cosmetic baffle assy together with
the woofer ring assy by 4 internal screws. To detach the woofer
(woofer ring assy), loosen these screws. To attach the woofer
ring assy, fit the boss of the woofer ring to the hole of the cos-
metic baffle assy. To attach the woofer, face its terminal down-
ward, and fit the portion of the notch and hole of the frame to
the bank and hole of the cosmetic baffle assy. To attach the
woofer ring assy and woofer, replace it on the cosmetic baffle
assy correctly and secure with 4 screws.
The mid-range is attached to the cosmetic baffle assy by 2 inter-
nal screws. To detach the mid-range, loosen these screws. Then
carefully disconnect the wires of the tweeter mounted on the
cosmetic baffle assy by adhesion. To attach the mid-range, re-
place it on the cosmetic baffle assy correctly and secure with 2
screws.
This product is component of system.
For the operating instructions, refer to the service manual RRV2035 for XR-VS77.
(for Main Speaker)
(for Surround Speaker)
S-VS77LV-WR consists of Main Speaker (2PCS) and Surround Speaker (2PCS).
2
NSP
Cabinet (L)
SMM1805
NSP
Cabinet (R)
SMM1839
Network ASSY
SWN1577
NSP
Origin Label
SAX1349
Non Skid Pad
SEC1374
Gasket (for width)
SEC1359
Gasket (for height)
SEC1375
NSP
Acoustic Absorbent
SMV1886
NSP
Stamped Model Label (L)
SME2811
NSP
Model Label (L)
SAN2611
NSP
Stamped Model Label (R)
SME2812
NSP
Model Label (R)
SAN2612
NSP
Stamped Model Label (Surround)
SME2813
NSP
Model Label (Surround)
SAN2615
NSP
CS ASSY (for Surround)
SMW1556
Screw (for Speaker)
BYC40P130FZK
Speaker
D87CC45-53K
Connecting Cord
SDF1068
Cover
SES1018
Grille ASSY
SMG1621
NSP
Badge 38
SAM1442
NSP
Grille Cloth
SAS1440
NSP
Baffle Board
SNK2321
NSP
Cabinet
SNK2322
Screw (for Speaker)
TTZ40P080FMC
Cosmetic Baffle ASSY (L)
SXB1325
NSP
Cosmetic Baffle (L)
SNK2288
NSP
Duct
SNK2304
Diaphragm ASSY 20
SXE1080
NSP
Ceramic Tweeter
SCA1011
Gasket
SEC1387
NSP
Terminal (Red)
SKF1034
NSP
Terminal (Black)
SKF1035
NSP
Diaphragm
SVA1024
Cosmetic Baffle ASSY (R)
SXB1326
NSP
Cosmetic Baffle (R)
SNK2289
NSP
Duct
SNK2304
Diaphragm ASSY 20
SXE1080
NSP
Ceramic Tweeter
SCA1011
Gasket
SEC1387
NSP
Terminal (Red)
SKF1034
NSP
Terminal (Black)
SKF1035
NSP
Diaphragm
SVA1024
Woofer Ring ASSY
SXB1336
NSP
Woofer Ring
SNK2293
NSP
Cosmetic Ring ASSY
SXB1337
NSP
Punching Net
SNC1160
NSP
Cosmetic Ring
SNK2327
Speaker (Woofer)
A16LU83-52D
Speaker (Mid-range)
D66AP45-53D
Mark No.
Description
Part No.
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
NOTES:
PARTS LIST
Mark No.
Description
Part No.
S-VS77LV-WR
Screw (for Tweeter)
BPZ30P100FMC
Tapping Screw (for Cosmetic Baffle) SBA1162
Screw (for Woofer and
BPZ40P160FMC
Woofer Ring ASSY)
Top Protector
SHA2112
Top Protector
SHA2125
(for Surround Speaker)
Bottom Protector
SHA2113
Bottom Protector
SHA2124
(for Surround Speaker)
PS Spacer A
SHA2152
PS Spacer B
SHA2153
NSP
CSS Label
SAX1338
Protection Sheet
SHC1429
(for Surround Speaker)
Packing Case
SHG2147
NSP
Polyethylene Bag S1
SHL1109
(for Surround Speaker)
NSP
Polyethylene Bag S5
SHL1212
For Packing
Network ASSY (SWN1577)
Woofer
2.2
µF
Midrange
I N
Tweeter
Diaphragm ASSY 20
(In Cosmetic Baffle ASSY)
Red
White
Black
Black
Black
Red
Red
Red
SCHEMATIC DIAGRAM
Surround
Speaker
IN
Gray
/Black
Gray
Connecting Cord (SDF1068)