PIONEER S-VS55V/XJI/E - Service Manual Immediate Download

ORDER NO.

PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.

PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium

PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 501 Orchard Road, #10-00 Wheelock Place, Singapore 238880

PIONEER ELECTRONIC CORPORATION 1998

RRV2021

T-ZZW SEPT. 1998 Printed in Japan

FOR PRECAUTION OF

REASSEMBLY AND DISASSEMBLY

SPEAKER SYSTEM

S-VS55V

XJI/E

S-VS55V XJI/NC

This product is component of system.

For the operating instructions, refer to the service manual RRV2035 for XR-VS55.

The cosmetic baffle assy is attached to the cabinet by 4 external

screws. To detach the cosmetic baffle assy, loosen these

screws. Then carefully disconnect the wires of the woofer and

mid-range mounted on the cosmetic baffle assy. To attach the

cosmetic baffle assy, replace it on the cabinet correctly and se-

cure with 4 screws.

The woofer is attached to the cosmetic baffle assy together with

the woofer ring assy by 4 internal screws. To detach the woofer

(woofer ring assy), loosen these screws. To attach the woofer

ring assy, fit the boss of the woofer ring to the hole of the cos-

metic baffle assy. To attach the woofer, face its terminal down-

ward, and fit the portion of the notch and hole of the frame to

the bank and hole of the cosmetic baffle assy. To attach the

woofer ring assy and woofer, replace it on the cosmetic baffle

assy correctly and secure with 4 screws.

The mid-range is attached to the cosmetic baffle assy by 2 in-

ternal screws. To detach the mid-range, loosen these screws.

Then carefully disconnect the wires of the tweeter mounted on

the cosmetic baffle assy by adhesion. To attach the mid-range,

replace it on the cosmetic baffle assy correctly and secure with

2 screws.

The network assy is attached to the back board of the cabinet

by press-fitting. To detach the network assy, strike the cord-

stopper of the network assy with a hammer from inside of the

cabinet. To attach the network assy, replace it on the back

board of the cabinet correctly by press-fitting.

When exchange the tweeter, do it with the cosmetic baffle

assy.

NSP

Cabinet (L)

SMM1807

NSP

Cabinet (R)

SMM1840

Network ASSY

SWN1577

Gasket (for width)

SEC1359

Gasket (for height)

SEC1375

Non Skid Pad

SEC1374

NSP

Acoustic Absorbent

SMV1886

Cosmetic Baffle ASSY (L)

SXB1329

NSP

Duct

SNK2304

Cosmetic Baffle (L)

SNK2315

Diaphragm ASSY 20

SXE1080

NSP

Ceramic Tweeter

SCA1011

Gasket

SEC1387

NSP

Terminal (Red)

SKF1034

NSP

Terminal (Black)

SKF1035

NSP

Diaphragm

SVA1024

Cosmetic Baffle ASSY (R)

SXB1330

NSP

Duct

SNK2304

Cosmetic Baffle (R)

SNK2316

Diaphragm ASSY 20

SXE1080

NSP

Ceramic Tweeter

SCA1011

Gasket

SEC1387

NSP

Terminal (Red)

SKF1034

NSP

Terminal (Black)

SKF1035

NSP

Diaphragm

SVA1024

Mark No.

Description

Part No.

Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.

The

mark found on some component parts indicates the importance of the safety factor of the part.

Therefore, when replacing, be sure to use parts of identical designation.

NOTES:

PARTS LIST

Mark No.

Description

Part No.

S-VS55V

SCHEMATIC DIAGRAM

For Packing

Network ASSY (SWN1577)

Woofer

2.2

µF

Midrange

I N

Tweeter

Diaphragm ASSY 20

(In Cosmetic Baffle ASSY)

Red

White

Black

Red

Woofer Ring ASSY

SXB1338

NSP

Woofer Ring

SNK2313

NSP

Cosmetic Ring ASSY

SXB1337

NSP

Punching Net

SNC1160

NSP

Cosmetic Ring

SNK2327

Speaker (Woofer)

A16LU83-52D

Speaker (Mid-range)

D66AP45-53D

Tapping Screw (for Cosmetic Baffle) SBA1161

Screw (for Tweeter)

BPZ30P100FMC

Screw (for Woofer and

BPZ40P160FMC

Woofer Ring ASSY)

( XJI/E Type )

NSP

Stamped Model Label (L)

SME2778

NSP

Model Label (L)

SAN2582

NSP

Stamped Model Label (R)

SME2779

NSP

Model Label (R)

SAN2583

( XJI/NC Type )

NSP

Stamped Model Label (L)

SME2848

NSP

Model Label (L)

SAN2601

NSP

Stamped Model Label (R)

SME2849

NSP

Model Label (R)

SAN2602

Top Protector

SHA2112

Bottom Protector

SHA2113

Protection Sheet S3

SHC1731

NSP

Polyethylene Bag S5

SHL1212

Packing Case ( XJI/E Type)

SHG2104

Packing Case ( XJI/NC Type)

SHG2149