ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2000
c
Component
System
Service Manual
Remarks
COMPACT MINI COMPONENT
X-VS90
STEREO CD/VCD CASSET DECK RECEIVER
XR-VS90
RRV2364
SPEAKER SYSTEM
S-VS300VLRW
RRV2357
This service manual
S-VS300VLRW
RRV2357
T ZZV AUG. 2000 Printed in Japan
SPEAKER SYSTEM
XJI/NC
XJI/E
XTL/NC
This product is component of system.
Front SP
Super Woofer
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The cosmetic baffle assy is attached to the cabinet by 4 external
hexagon socket screws. To detach the cosmetic baffle assy,
loosen these screws by the hexagon screw driver. Then care-
fully disconnect the wires of the woofer and mid-range
mounted on the cosmetic baffle assy. To attach the cosmetic
baffle assy, replace it on the cabinet correctly and secure with
4 screws.
The woofer is attached to the cosmetic baffle assy by 4 internal
screws. To detach it ,unfasten these screws. When attaching it,
face its terminal downward.
The mid-range is attached to the cosmetic baffle assy by 2 inter-
nal screws. To detach it, loosen these screws. Then carefully
disconnect the wires of the tweeter mounted on the cosmetic
baffle assy by adhesion. To attach the mid-range, replace it on
the cosmetic baffle assy correctly and secure with 2 screws.
The network assy is connected to the input terminal. To detach
it, disconnect the wire from the input terminal. To attach the
network assy, connect the wire of the network assy to the input
terminal correctly.
When exchange the tweeter, do it with the cosmetic baffle assy.
( for Front Speaker)
( for Super Woofer)
The cosmetic baffle assy is attached to the cabinet by 4 external
hexagon socket screws. To detach the cosmetic baffle assy,
loosen these screws by the hexagon screw driver. Then care-
fully disconnect the wires of the woofer mounted on the cos-
metic baffle assy. To attach the cosmetic baffle assy, replace it
on the cabinet correctly and secure with 4 screws.
The woofer is attached to the cosmetic baffle assy together with
the cosmetic ring assy by 4 internal screws. To detach the
woofer(cosmetic ring assy), lossen these screws. To attach the
cosmetic ring assy, fit the notch of the cosmetic ring to the pro-
jection of the cosmetic baffle assy. To attach the woofer ,face
its terminal downward and upward. At this occasion, set the
terminal up-down direction so that the print label of the woofer
is right direction seeing from the speaker system front side. To
attach the cosmetic ring assy and woofer, replace it on the cos-
metic baffle assy correctly and secure with 4 screws.
The network assy is attached to the bottom board by one inter-
nal screw and adhesive. To detach it, unfasten that screw and
pry it out. To attach it, apply adhesive to the bottom board.
Then press it to the bottom board, and secure with one screw.
When attaching the network assy, do it carefully so that each
wire is not touched.
S-VS300VLRW
2
S-VS300VLRW
3
Mark No.
Description
Part No.
For Packing
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
NOTES:
PARTS LIST
NSP
CS ASSY (Front Speaker)
See Contrast table (2)
NSP
CS ASSY (Super Woofer)
See Contrast table (2)
Speaker Wire (for Front speaker)
SDS1057
Speaker Wire (for Woofer)
SDS1084
Spacer
See Contrast table (2)
NSP
Packing Case
See Contrast table (2)
NSP
CS ASSY (Front Speaker)
SMW1594
SMW1596
SMW1615
* 1
NSP
CS ASSY (Super Woofer)
SMW1595
SMW1597
SMW1616
* 2
Spacer
SHD1046
SHD1046
SHD1047
Packing Case
SHG2273
SHG2285
SHG2314
Part No.
Remarks
Mark
S-VS300VLRW
S-VS300VLRW
S-VS300VLRW
(2) CONTRAST TABLE
S-VS300VLRW/XJI/NC, /XJI/E and /XTL/NC models are constructed the same except for the following:
Symbol and Description
/XJI/NC
/XJI/E
/XTL/NC
(1) PARTS LIST
CS ASSY (Front Speaker)
(1) PARTS LIST
NSP
Cabinet
See Contrast table (2)
Network Assy
SWN1656
Input Terminal
KKX1014
Gasket (Baffle wide)
See Contrast table (2)
Non Skid Pad
See Contrast table (2)
Gasket (Baffle height)
See Contrast table (2)
NSP
Stamped Model Label (L)
See Contrast table (2)
NSP
Stamped Model Label (R)
See Contrast table (2)
NSP
Acoustic Absorbent
See Contrast table (2)
Cosmetic Baffle Assy (L)
SXB1410
NSP
Duct (L)
SMR1315
NSP
Duct (R)
SMR1316
NSP
Punching Net
SNC1183
NSP
Cosmetic Baffle (L)
SNK2466
Diaphragm Assy20
SXE1092
NSP
Ceramic Tweeter
SCA1017
NSP
Terminal
SKF1034
NSP
Terminal
SKF1035
* 1 : Refer to " CS ASSY (Front Speaker) ".
* 2 : Refer to " CS ASSY (Super Woofer) ".
Mark No.
Description
Part No.
Cosmetic Baffle Assy (R)
SXB1411
NSP
Duct (L)
SMR1315
NSP
Duct (R)
SMR1316
NSP
Punching Net
SNC1183
NSP
Cosmetic Baffle (R)
SNK2467
Diaphragm Assy20
SXE1092
NSP
Ceramic Tweeter
SCA1017
NSP
Terminal
SKF1034
NSP
Terminal
SKF1035
Speaker (Woofer)
A14LC83-51H
Speaker (Mid)
E52AP39-58D
Screw (for Mid)
See Contrast table (2)
Screw (for Woofer)
See Contrast table (2)
Tapping Screw
SBA1162
Top Protector
See Contrast table (2)
Bottom Protector
See Contrast table (2)
Protection Sheet
See Contrast table (2)
NSP
Polyethylene Bag S5
See Contrast table (2)
Mark No.
Description
Part No.
For Packing
S-VS300VLRW
4
NSP
Cabinet
SMM1918
SMM1918
SMM1919
Non Skid Pad
SEC1374
SEC1374
SEC1416
Gasket (Baffle wide)
SEC1359
SEC1359
SEC1414
Gasket (Baffle height)
SEC1380
SEC1380
SEC1412
NSP
Stamped Model Label (L)
SME3040
SME3043
SME3105
NSP
Stamped Model Label (R)
SME3041
SME3044
SME3106
NSP
Acoustic Absorbent
SMV1886
SMV1886
SMV1916
Screw (for Mid)
BPZ40P080FMC
BPZ40P080FMC
PPZ40P080FMC
Screw (for Woofer)
BPZ40P100FMC
BPZ40P100FMC
PPZ40P100FMC
Top Protector
SHA2217
SHA2217
SHA2225
Bottom Protector
SHA2218
SHA2218
SHA2226
Protection Sheet
Not used
Not used
SHC1730
NSP
Polyethylene Bag S5
SHL1212
SHL1212
SHL1230
Part No.
Remarks
Mark
SMW1594
SMW1596
SMW1615
(2) CONTRAST TABLE
SMW1594,SMW1596 and SMW1615 are constructed the same except for the following:
Symbol and Description
CS ASSY (Super Woofer)
(1) PARTS LIST
NSP
Cabinet
See Contrast table (2)
Network Assy
SWN1655
Input Terminal
KKX1016
Non Skid Pad
See Contrast table (2)
Gasket (Baffle wide)
See Contrast table (2)
Gasket (Baffle height)
See Contrast table (2)
NSP
Stamped Model Label
See Contrast table (2)
NSP
Acoustic Absorbent
See Contrast table (2)
Cosmetic Baffle Assy
SXB1415
NSP
Duct
SMR1317
NSP
Cosmetic Baffle
SNK2469
Cosmetic Ring Assy
SXB1419
NSP
Punching Net
SNC1183
NSP
Cosmetic Ring
SNK2486
Mark No.
Description
Part No.
For Packing
Mark No.
Description
Part No.
Speaker (Woofer)
B18LU86-51H
Screw
BPZ40P160FMC
(for Woofer,Cosmetic Ring Assy)
Screw (for Network Assy)
See Contrast table (2)
Tapping Screw
SBA1162
Top Protector
See Contrast table (2)
Bottom Protector
See Contrast table (2)
Protection Sheet
See Contrast table (2)
NSP
Polyethylene Bag S5
See Contrast table (2)
NSP
Cabinet
SMM1899
SMM1899
SMM1920
Non Skid Pad
SEC1374
SEC1374
SEC1416
Gasket (Baffle wide)
SEC1477
SEC1477
SEC1503
Gasket (Baffle height)
SEC1478
SEC1478
SEC1504
NSP
Stamped Model Label
SME3042
SME3045
SME3107
NSP
Acoustic Absorbent
SMV1886
SMV1886
SMV1916
Screw (for Network Assy)
BYC40P250FZB
BYC40P250FZB
BYC40P300FZB
Top Protector
SHA2229
SHA2229
SHA2260
Bottom Protector
SHA2230
SHA2230
SHA2261
Protection Sheet
Not used
Not used
SHC1730
NSP
Polyethylene Bag S5
SHL1212
SHL1212
SHL1230
Part No.
Remarks
Mark
SMW1595
SMW1597
SMW1616
(2) CONTRAST TABLE
SMW1595,SMW1597 and SMW1616 are constructed the same except for the following:
Symbol and Description
S-VS300VLRW
5
I N
Red
Blue
1.5mH
2.2
µF
Black
Blue
White
White
Blue
White
Red
Red
White
White
Network ASSY (SWN1655)
Network ASSY (SWN1656)
Woofer
Woofer
Midrange
Tweeter
Diaphgram ASSY 20
(In Cosmetic Baffle ASSY)
INPUT
SCHEMATIC DIAGRAM