ORDER NO.
PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 501 Orchard Road, #10-00 Wheelock Place, Singapore 238880
PIONEER ELECTRONIC CORPORATION 1998
RRV1989
T-ZZW AUG. 1998 Printed in Japan
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The grille is attached to the cabinet by catches. Detach by pull-
ing it toward you.
The woofer is attached to the inner baffle by 4 external screws.
To detach it, unfasten those screws. To detach it, first remove
the cosmetic baffle. Then remove the woofer.
When attaching it, fit the boss of the flange into the hole on the
baffle. (Face its terminal upward.)
The tweeter is attached to the inner baffle by 2 external screws.
To detach it, unfasten those screws. To detach it, first remove
the cosmetic baffle. Then remove the tweeter.
When attaching it, fit the boss of the flange into the hole on the
baffle. (Face its terminal lower left.)
This product is component of system.
For the operating instructions, refer to the service manual RRV1997 for XC-L5.
SPEAKER SYSTEM
S-L5V
XE
S-L5V-A XE
S-L5V-K XE
The cosmetic baffle is attached to the inner baffle by its bosses.
To detach it, pry it open by inserting a flat blade screwdriver
into its lower slot. To detach it, first remove the grille. Then
remove the cosmetic baffle.
To attach it, apply acetic vinyl adhesive slightly to the holes on
the inner baffle. Then press it to the inner baffle.
2
NSP
Cabinet (for S-L5V Model)
FRMM-172
NSP
Baffle Board
FRNK-317
NSP
Cabinet (for S-L5V-A Model)
FRMM-180
NSP
Baffle Board
FRNK-317
NSP
Cabinet (for S-L5V-K Model)
FRMM-181
NSP
Baffle Board
FRNK-317
Grille
FRMG-152
NSP
Badge
FRAM-029
NSP
Punching Net
FRNC-011
NSP
Grille Frame
FRNK-319
NSP
Network ASSY
FRWN-147
NSP
Label Back (for S-L5V Model)
FRAN-244
NSP
Label Back (for S-L5V-A Model)
FRAN-255
NSP
Label Back (for S-L5V-K Model)
FRAN-256
Input Terminal
FRKX-013
NSP
Acoustic Absorbent
FRMV-030
Cosmetic Baffle
FRNK-318
(for S-L5V and S-L5V-A Models)
Cosmetic Baffle(for S-L5V-K Model)FRNK-343
NSP
Duct 35
FRNK-323
Catch
FRNK-314
NSP
Label Serial
FRAN-500
Speaker (Woofer)
P12EC65-62D
Speaker (Tweeter)
FE52AP39-54F
Screw (for Speaker)
BPZ40P160FZB
Mark No.
Description
Part No.
SCHEMATIC DIAGRAM
For Packing
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
NOTES:
PARTS LIST
Mark No.
Description
Part No.
S-L5V, S-L5V-A, S-L5V-K
Network ASSY (FRWN-147)
Woofer
1.5
µF/63V
Tweeter
INPUT
Connector
(Red)
Connector
(Blue)
Connector
(White)
Speaker Cord
FRDD-041
Non-Skid Pads
FREC-021
Protector
FRHA-160
Protection Sheet S3
FRHC-021
Packing Case (for S-L5V Model)
FRHG-228
Packing Case (for S-L5V-A Model) FRHG-234
Packing Case (for S-L5V-K Model) FRHG-235