ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 1999
RRV2192
T-ZZM SEP. 1999 Printed in Japan
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The grille is attached to the cabinet by catches.
Detach by pulling it toward you.
The woofer is attached to the baffle by 4 external screws.
To detach it, unfasten those screws.
When attaching upper one, face its terminal downward.
When attaching lower one, face its terminal upward.
The midrange is attached to the flange lower side by 4 external
screws. To detach it, unfasten those screws. When attaching it,
face its terminal downward.
The tweeter is attached to the flange upper side by 2 external
screws. To detach it, unfasten those screws. When attaching it,
first reattach the packing around tweeter diaphragm, then face
its terminal downward.
The flange is attached to the baffle by 4 external screws. To
detach it, unfasten those screws. When attaching it, face it
downward.
To detach the midrange or tweeter, first remove the flange.
Then remove it.
The input terminal is attached to the back board by press-fit-
ting. To detach it, pry it open by inserting a flat blade screw-
driver into lower side.
The Network Assy is attached to the input terminal by
soldaring.
[ Front speaker ]
S-HS88-F
XMA/NC
S-HS88-CR XMA/NC
SPEAKER SYSTEM
[ Center speaker ]
Front
Center
Rear
The grille is attached to the cabinet by catches.
Detach by pulling it toward you.
The woofer is attached to the baffle by 4 external screws.
To detach it, unfasten those screws.
When attaching it, first exchange the flange, then face its termi-
nal downward.
The tweeter is attached to the baffle by 4 external screws. To
detach it, unfasten those screws. When attach it, do so that it
will move vertical. The tweeter wires, connected in the middle
of network Assy , are covered with the insulating tape.
The input terminal is attached to the back board by press-fit-
ting. To detach it, pry it open by inserting a flat blade screw-
driver into lower side.
The Network Assy is attached to the input terminal by
soldaring.
[ Rear speaker ]
When exchange the rear speaker, do it with the CS Assy (R).
2
S-HS88-F, S-HS88-CR
Mark No.
Description
Part No.
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
NOTES:
PARTS LIST
Mark No.
Description
Part No.
[S-HS88-F]
NSP
CS Assy
SMW1567
NSP
Label Back
SAN2775
Packing (for Flange)
SEC1454
Packing (for Duct)
SEC1455
Packing (for Tweeter)
SEC1457
Input Terminal Board
SKX1059
Grille Assy
SMG1676
NSP
Grille Frame
SNK2444
NSP
Catch
SNK-883
Duct Flange Assy
SNX1139
NSP
Badge
SAM1443
NSP
Duct Flange
SNK2446
Flange Assy
SNX1140
NSP
Flange
SNK2445
Network Ass'y
SWN1624
Speaker (Woofer)
Q20EU82-51L
Speaker (Mid-range)
SWS9021
Speaker (Tweeter)
SWS9022
Screw (for WF and Flange Assy)
SBA1176
Screw (for Mid-range)
BPZ30P060FZK
Screw (for Tweeter))
BPZ30P080FZK
For Packing
NSP
Accessories Assy
SME2997
NSP
Polyethylene Bag
E11-024
Speaker Wire (red)
SDS1074
Operating Instructions
SRD1219
( English/Spanish/Chinese)
Protector (L)
SHA2204
Protector (R)
SHA2205
Packing Case
SHG2246
Packing Bag
SHL1243
[S-HS88-CR]
NSP
CS Assy (C)
SMW1568
NSP
Label Back
SAN2776
CS Assy (R)
SMW1569
NSP
Label Back
SAN2779
Input Terminal Board
SKX1059
Grille Assy (Center)
SMG1677
NSP
Badge
SAM1443
NSP
Grille Frame
SMH1005
Grille Assy (Rear)
SMG1678
NSP
Badge
SAM1443
NSP
Grille Frame
SNK2448
Cosmetic Flange
SNK2447
Speaker (Center)
SWM9016
NSP
Speaker (Rear)
SWM9017
Speaker (Tweeter)
ASY-260B
Network Assy (Center)
SWN1625
Input Terminal Assy (Rear)
SWT1052
Input Terminal Board
SKX1059
Screw (for rear bracket)
BYC30P120FZB
Screw (for rear speaker)
BYC40P130FZB
Screw (for center speaker)
SBA1177
For Packing
NSP
Accessories Assy
SME2998
NSP
Polyethylene Bag
E11-024
Speaker Wire (orange)
SDS1075
Speaker Wire (blue)
SDS1076
Speaker Wire (yellow)
SDS1077
Operating Instructions
SRD1220
( English/Spanish/Chinese)
Protector
SHA2206
Packing Case
SHG2247
NSP
Packing Bag (Center)
SHL1242
Packing Bag (Rear)
SHL1244
3
S-HS88-F, S-HS88-CR
Network ASSY (SWN1624)
SCHEMATIC DIAGRAM
Woofer x2
Mid-range
I N
Tweeter
1.0
µF
0.82mH
0.18mH
Red
White
White
Green
White
Blue
4.7
µF
Woofer x2
I N
Tweeter
1.0
µF
0.33mH
Red
White
White
Blue
Network ASSY (SWN1625)