ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2004
RRV3000
T ZZE JULY 2004 Printed in Japan
S-EV33V
S-EV33V
XJI/E
S-EV33V XJI/NC
SPEAKER SYSTEM
Front
Sub Woofer
Front
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The grille is attached to the cabinet by catches. Detach by pull-
ing it toward you.
The woofer is attached to the cosmetic baffle by 4 internal
screws. The cosmetic baffle is atached to the cabinet by 4 exter-
nal screws. To detach it, first insert a sharp-pointed tool like an
eyeleteer into the catch and push up. Next unfasten screws for
the cosmetic baffle. Then unfasten those screws.
When attaching the woofer, face its terminal downward. When
attaching the cosmetic baffle on the cabinet by screws.
The tweeter is attached to the cosmetic baffle by 2 internal
screws. The cosmetic baffle is atached to the cabinet by 4 exter-
nal screws and 2 bosses. To detach it, perform same as the
woofer.
(Front SP)
(Sub Woofer)
The woofer is attached to the back board by 4 external screws.
To detach it, unfasten those screws.
The input terminal is attached to the back board of the cabinet
together with the adhesive by press-fitting. To detach the input
terminal, pry it open by inserting a flat blade screwdriver into
the upper and lower slot of the input terminal. To attach the
input terminal, replace it on the back board of the cabinet cor-
rectly together with the adhesive by press-fitting. (The red ter-
minal is right-side.)
The cosmetic baffle is attached to the baffle of the cabinet to-
gether with the adhesive by press-fitting. To detach the cos-
metic baffle, pry it open by inserting a flat blade screwdriver
into the lower slot of it. To attach the cosmetic baffle, replace it
on the baffle of the cabinet together with the adhesive by press-
fitting.
How to replace the cosmetic baffle and cosmetic duct
1. Remove the speaker from the cabinet, first removing the four
screws.
2. Reach through the hole where the speaker was originally lo-
cated and pull out the damper attached at the end of the cos-
metic duct by hand. (Damper: See Product Appearance 11.)
Note: Detach the damper with great care so as not to damage
the interior surface of its circumference.
3. With the aid of a flathead screwdriver inserted through the slit
at the lower part of the cosmetic baffle, remove the cosmetic
baffle from the cabinet.
4. Reassemble the subwoofer, as shown below:
4-1 Apply adhesive to the cosmetic baffle and press it into the
cabinet.
4-2 Apply adhesive to the interior surface of the circumfer-
ence of the damper previously removed.
4-3 Insert the damper into the cabinet through the hole where
the speaker was, and adhere it so that the end of the cos-
metic duct is on the same plane as the surface of the
damper.
4-4 Secure the speaker to the cabinet with the four screws pre-
viously removed.
3
1
23
4
1
2
3
4
C
D
F
A
B
E
S-EV33V
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
NOTES:
PARTS LIST
Mark No.
Description
Part No.
NSP
CS Assy (Sub Woofer)
SMW1853
NSP
CS Assy (Front )
SMW1852
for Accessory
NSP
Accessories Set
SME3449
NSP
Polyethylene Bag S1
KHL1079
Speaker Cord
SDS1064
for XJI/E type
NSP
Stamped Label
SME3503
NSP
Model Label (Front)
SAN3509
NSP
Stamped Label
SME3504
NSP
Model Label (Sub Woofer)
SAN3510
for XJI/NC type
NSP
Stamped Label
SME3588
NSP
Model Label (Front)
SAN3534
NSP
Stamped Label
SME3589
NSP
Model Label (Sub Woofer)
SAN3535
for Packing
Top Protector
SHA2387
Bottom Protector
SHA2388
Protection Sheet S3
SHC1803
Packing Case (for XJI/E type)
SHG2596
Packing Case (for XJI/NC type)
SHG2603
NSP
Polyethylene Bag S5 (for Front and Sub WF)
SHL1385
7
7
7
7
7 CS Assy (Front SP)
Mark No.
Description
Part No.
NSP
Cabinet
SMM2006
Grille Assy
SMG1826
NSP
Badge 36
SAM1441
NSP
Grille Frame
SMH1089
NSP
Punching Net
SNC1204
NSP
Double face tape
SEH1062
Network Assy
SWN1703
Non Skid Pad
SEC1827
Gasket
SEC1629
Packing
SEC1726
NSP
Acoustic Absorbent
SMV1886
NSP
Acoustic Absorbent
SMV2207
Catch
SNK2176
Cosmetic Baffle
SNK2803
Speaker (Woofer)
A14LU75-51D
Speaker (Tweeter)
E52AP45-55D
Screw (for Speaker)
BPZ40P100FNI
Screw (for Cosmetic Baffle)
PYC40P400FNI
7
7
7
7
7 CS Assy (Sub Woofer)
Mark No.
Description
Part No.
NSP
Cabinet
SMM2008
Input Terminal
KKX1014
Connection Cord
SDD1317
Non Skid Pad
SEC1827
NSP
Packing
SEC1535
NSP
Duct 48
SMR1369
NSP
Acoustic Absorbent
SMV1886
Cosmetic Baffle
SNK2683
NSP
Cosmetic Board (Top)
SNK2686
NSP
Cosmetic Board (Under)
SNK2687
Speaker
Q13LR82-51D
Screw (for Speaker)
BYC40P200FNI
4
1
23
4
12
3
4
C
D
F
A
B
E
S-EV33V
PRODUCT APPEARANCE
CS Assy (Front SP)
CABINET
COSMETIC BAFFLE
CATCH
GASKET
GASKET
SPEAKER
SPEAKER
GRILLE ASS'Y
SCREW
NON SKID PAD
SCREW
ACOUSTIC ABSORBENT
ACOUSTIC ABSORBENT
NETWORK ASS'Y
MODEL LABEL
HORIZONTAL
VERTICAL
TWEETER
WOOFER
PYC40P400FNI
BPZ40P100FNI
DUFFEL FELT(t8)
DUFFEL FELT(t8)
1
1
4
2
2
1
1
1
4
4
6
1
1
1
1
No.
Num.
Part Name
Remarks
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
(351)
(200)
(250)
1
11
15
12
14
13
TO LARGE TERMINAL
OF THE TWEETER
TO LARGE
TERMINAL OF
THE WOOFER
WHITE WITH
GRAY LINE
(S-EV99V
S-EV66V)
TO SMALL TERMINAL
OF THE TWEETER
RED
RED
(S-EV33V)
WHITE(S-EV99V,S-EV66V)
BLACK(S-EV33V)
TO SMALL TERMINAL
OF THE WOOFER
WHITE
2
3
4
5
6
7
8
9
10
Woofer
I N
Red
White
Black
Black
Red
Red
Tweeter
2.7
µF
SCHEMATIC DIAGRAM
Network Assy : SWN1703
5
1
23
4
1
2
3
4
C
D
F
A
B
E
S-EV33V
PRODUCT APPEARANCE
CS Assy (Sub Woofer)
No.
Num.
Part Name
Remarks
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
1
1
1
1
1
1
1
1
1
1
1
1
4
1
1
1
4
CABINET
COSMETIC BAFFLE
COSMETIC BOARD(TOP)
TAPE
ACOUSTIC ABSORBENT
PACKING
COSMETIC BOARD(UNDER)
TAPE
DUCT48
DAMPER
DAMPER
SPEAKER
SCREW
CONNECTION CORD
INPUT TERMINAL
MODEL LABEL
NON SKID PAD
DUFFEL FELT(t8)
BYC40P200FNI
5
4
3
2
1
6
7
8
11
10
9
14
15
16
17
13
12
(170)
(351)
from NON SKID PAD
(321.5)
Speaker
I N
Red
Black
SCHEMATIC DIAGRAM
Connection Cord (SDD1317)