ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2008
Center
Surround
Front
S-DV395T
RRV3744
T-ZZR MAY 2008 Printerd in Japan
SPEAKER SYSTEM
S-DV395T
SXTW/WL5
2
S-DV395T
1
2
3
4
C
D
F
A
B
E
1
2
3
4
1. REASSEMBLY AND DISASSEMBLY PRECAUTIONS
1.1 FRONT, SURROUND SPEAKER
GRILLE
The grille is attached to the cabinet by its bosses applied with
adhesive. To detach it, pry it open by inserting a flat blade
screwdriver into lower right and lower left slot. To attach it, apply
adhesive to the holes on the baffle. Then press it to the baffle.
CAUTION
There are 12 bosses for press-fitting at the grille. To detach the
grille, remove in order from lower bosses. (Refer to the figure
in page 4.) In order not to damage the bosses, don't remove it
forcibly. Pry it open little by little. Be sure to insert a flat blade
screwdriver from just beside of its bosses.
WOOFER
The woofer is attached to the baffle by 4 external screws. To
detach it, unfasten those screws. To detach it, first remove the
grille. Then remove the screws. When attaching it, face its
terminal downward.
TWEETER
The tweeter is attached to the baffle by 3 external screws. To
detach it, unfasten those screws. To detach it, first remove the
grille. Then remove the screws. When attaching it, face its
terminal leftward and rightward.
COSMETIC PANEL
The cosmetic panel is attached to the baffle by its bosses. To
detach it, pry it open by inserting a flat blade screwdriver into
lower slot. To detach it, first remove the speaker stand base and
grille. Then remove the cosmetic panel. When attaching it, fit the
boss into the hole on the baffle.
SPEAKER STAND BASES
The speaker stand base is attached to the bottom of cabinet by 3
external screws. To detach it, unfasten those screws. Attach the
speaker stand bases to the stems using the screws provided. Once
you have aligned the stem and base, secure with the small screws
at the points shown below. Note that the speaker should face in the
direction of the base of the isosceles triangle (outlined below).
1.2 CENTER SPEAKER
GRILLE
The grille assy is attached to the cabinet by 8 external screws. To
detach it ,unfasten those screws.
SPEAKER UNIT
The speaker unit, together with the grille assy, is attached to the
cabinet by 4 external screws. To detach it, first remove the grille
assy. Next remove the cabinet. Then remove the cable. When
attaching it, face its terminal toward the leftward.
Speaker Stand Base
Stem
(the bottom of cabinet)
Front
Rear
3
S-DV395T
5
6
7
8
5
6
7
8
C
D
F
A
B
E
2. EXPLODED VIEWS AND PARTS LIST
2.1 PACKING
Tape
Tape
NSP 1
CS Assy (Front, Surround)
SMW6274
NSP 2
CS Assy (Center)
SMW6275
3
Speaker Cord (FL: White)
SDS1174
4
Speaker Cord (FR: Red)
SDS1175
5
Speaker Cord (SL: Blue)
SDS1176
6
Speaker Cord (SR: Gray)
SDS1177
7
Speaker Cord (C: Green)
SDS1178
8
Screw (for Speaker Stand Base)
CYC40P250FTC
9
Polyethylene Bag S0 (for Screw)
SHL1314
10
Non Skid Pad
SEP6014
(for Speaker Stand Base)
11
- - - - - -
12
Polyethylene Bag
SHL1251
(for Accessory set)
13
Polyethylene Bag S2 (for Center)
SHL1417
14
Speaker Stand Base
SMS6033
15
Protector
SHA6162
16
Protector
SHA6163
17
Protector
SHA6164
18
Protector
SHA6165
19
Protection Sheet
SHC6051
20
Packing Case
SHG6334
PACKING Parts List
Mark No.
Description
Part No.
Mark No.
Description
Part No.
4
S-DV395T
1
2
3
4
C
D
F
A
B
E
1
2
3
4
2.2 CS Assy (FRONT, SURROUND)
Speaker Stand Base
(refer to 2.1 PACKING / No.14)
Screw (x3)
(refer to 2.1 PACKING / No.8)
Model Label
Red
White
Red
Black
: the attached to
the applied with
adhesive.
1
Grille
SMG6141
2
Cosmetic Plate Assy
SNK6222
3
Input Terminal
SKX1060
4
Fastener
SNB6003
5
Network Assy
SWN6028
6
Speaker (Woofer)
K77DR55-56C
7
Speaker (Tweeter)
FK26AP32-51G
8
Screw (for Tweeter)
BYC35P160FTC
9
Screw (for Woofer)
BYC35P120FTC
10
Screw (for Fastener)
BYC35P120FTB
CS Assy (FRONT, SURROUND) Parts List
Mark No.
Description
Part No.
Mark No.
Description
Part No.
5
S-DV395T
5
6
7
8
5
6
7
8
C
D
F
A
B
E
2.3 CS Assy (CENTER)
Cabinet
5
8
2
Model Label
10
(x8)
4
9
11
12
1
Grille
SMG6129
2
Connecting Cord
SDD1345
3
Input Terminal
SKX6034
4
Speaker
K77DR55-55C
5
Screw (for Input Terminal)
BPZ35P080FTC
6
Screw (for Cabinet)
BPZ35P110FTB
7
Non Skid Pads
SEP1263
8
Non Skid Pad
SEP6028
CS Assy (CENTER) Parts List
Mark No.
Description
Part No.