PORTABLE DVD PLAYER
PDV-LC10
PDV-10
Operating Instructions
(with liquid crystal display)
2
En
INTRODUCTION
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated "dangerous
voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions
in
the
literature
accompanying the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
IMPORTANT
READ INSTRUCTIONS -- All the
safety and operating instructions
should be read before the product
is operated.
RETAIN INSTRUCTIONS -- The
safety and operating instructions
should be retained for future
reference.
HEED WARNINGS -- All warnings on
the product and in the operating
instructions should be adhered to.
FOLLOW INSTRUCTIONS -- All
operating and use instructions
should be followed.
CLEANING -- Unplug this product
from
the
wall
outlet
before
cleaning. The product should be
cleaned only with a polishing
cloth or a soft dry cloth. Never
clean with furniture wax, benzine,
insecticides or other volatile
liquids since they may corrode
the cabinet.
ATTACHMENTS
--
Do
not
use
attachments not recommended by
the product manufacturer as they
may cause hazards.
WATER AND MOISTURE -- Do not
use this product near water -- for
example, near a bathtub, wash
bowl, kitchen sink, or laundry tub;
in a wet basement; or near a
swimming pool; and the like.
ACCESSORIES -- Do not place this
product on an unstable cart,
stand, tripod, bracket, or table.
The product may fall, causing
serious injury to a child or adult,
and
serious
damage
to
the
product. Use only with a cart,
IMPORTANT SAFETY
INSTRUCTIONS
stand, tripod, bracket, or table
recommended by the manufacturer,
or sold with the product. Any
mounting of the product should
follow
the
manufacturer's
instructions, and should use a
mounting accessory recommended
by the manufacturer.
CART
--
A
product
and
cart
combination should be moved with
care. Quick stops, excessive force,
and uneven surfaces may cause
the product and cart combination to
overturn.
VENTILATION -- Slots and openings in
the
cabinet
are
provided
for
ventilation and to ensure reliable
operation of the product and to
protect it from overheating, and
these
openings
must
not
be
blocked or covered. The openings
should never be blocked by placing
the product on a bed, sofa, rug, or
other similar surface. This product
should not be placed in a built-in
installation such as a bookcase or
rack unless proper ventilation is
provided or the manufacturer's
instructions have been adhered to.
POWER SOURCES -- This product
should be operated only from the
type of power source indicated on
the marking label. If you are not
sure of the type of power supply
to
your
home,
consult
your
product dealer or local power
company.
LOCATION The appliance should be
installed in a stable location.
NONUSE PERIODS The power cord
of
the
appliance
should
be
unplugged from the outlet when
left un-used for a long period of
time.
GROUNDING OR POLARIZATION
÷
If this product is equipped with a
polarized alternating current line
plug (a plug having one blade
wider than the other), it will fit
into the outlet only one way. This
is a safety feature. If you are
unable to insert the plug fully into
the outlet, try reversing the plug.
If the plug should still fail to fit,
contact your electrician to replace
your obsolete outlet. Do not
defeat the safety purpose of the
polarized plug.
÷
If this product is equipped with a
three-wire grounding type plug, a
plug having a third (grounding) pin,
it will only fit into a grounding
type power outlet. This is a safety
feature. If you are unable to insert
the plug into the outlet, contact
your electrician to replace your
obsolete outlet. Do not defeat the
safety purpose of the grounding
type plug.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
IMPORTANT NOTICE
The serial number for this equipment is located on
the bottom of the player. Please write this serial
number on your enclosed warranty card and keep it
in a secure area. This is for your security.
3
En
INTRODUCTION
English
Fig. A
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
NEC
--
NATIONAL ELECTRICAL CODE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
POWER-CORD
PROTECTION
--
Power-supply cords should be
routed so that they are not likely
to be walked on or pinched by
items placed upon or against
them, paying particular attention
to cords at plugs, convenience
receptacles, and the point where
they exit from the product.
OUTDOOR ANTENNA GROUNDING
-- If an outside antenna or cable
system
is
connected
to
the
product, be sure the antenna or
cable system is grounded so as to
provide some protection against
voltage surges and built-up static
charges.
Article
810
of
the
National Electrical Code, ANSI/
NFPA 70, provides information
with regard to proper grounding of
the mast and supporting structure,
grounding of the lead-in wire to
an antenna discharge unit, size of
grounding conductors, location of
antenna-discharge unit, connection
to grounding electrodes, and
requirements for the grounding
electrode. See Figure A.
LIGHTNING -- For added protection
for this product during a lightning
storm,
or
when
it
is
left
unattended and unused for long
periods of time, unplug it from
the wall outlet and disconnect the
antenna or cable system. This will
prevent damage to the product
due to lightning and power-line
surges.
POWER LINES -- An outside antenna
system should not be located in
the vicinity of overhead power
lines or other electric light or
power circuits, or where it can fall
into such power lines or circuits.
When
installing
an
outside
antenna system, extreme care
should be taken to keep from
touching such power lines or
circuits as contact with them
might be fatal.
OVERLOADING -- Do not overload
wall outlets, extension cords, or
integral convenience receptacles as
this can result in a risk of fire or
electric shock.
OBJECT AND LIQUID ENTRY -- Never
push objects of any kind into this
product through openings as they
may
touch
dangerous
voltage
points or short-out parts that could
result in a fire or electric shock.
Never spill liquid of any kind on the
product.
SERVICING -- Do not attempt to
service this product yourself as
opening or removing covers may
expose you to dangerous voltage or
other hazards. Refer all servicing to
qualified service personnel.
DAMAGE REQUIRING SERVICE --
Unplug this product from the wall
outlet
and
refer
servicing
to
qualified service personnel under
the following conditions:
÷
When the power-supply cord or
plug is damaged.
÷
If liquid has been spilled, or objects
have fallen into the product.
÷
If the product has been exposed to
rain or water.
÷
If the product does not operate
normally by following the operating
instructions. Adjust only those
controls that are covered by the
operating
instructions
as
an
improper adjustment of other
controls may result in damage and
will often require extensive work by
a qualified technician to restore the
product to its normal operation.
÷
If the product has been dropped or
damaged in any way.
÷
When
the
product
exhibits
a
distinct change in performance --
this indicates a need for service.
REPLACEMENT PARTS -- When
replacement parts are required, be
sure the service technician has
used replacement parts specified
by the manufacturer or have the
same
characteristics
as
the
original
part.
Unauthorized
substitutions may result in fire,
electric shock, or other hazards.
SAFETY CHECK -- Upon completion
of any service or repairs to this
product, ask the service technician
to perform safety checks to
determine that the product is in
proper operating condition.
WALL OR CEILING MOUNTING --
The
product
should
not
be
mounted to a wall or ceiling.
HEAT -- The product should be
situated away from heat sources
such as radiators, heat registers,
stoves,
or
other
products
(including amplifiers) that produce
heat.
4
En
INTRODUCTION
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Information to User
Alteration or modifications carried out without
appropriate authorization may invalidate the user's
right to operate the equipment.
CAUTION:
This product satisfies FCC regulations when shielded
cables and connectors are used to connect the unit to
other equipment. To prevent electromagnetic interference
with electric appliances such as radios and televisions, use
shielded cables and connectors for connections.
[For Canadian model]
This Class B digital apparatus complies with Canadian
ICES-003.
[Pour le modèle Canadien]
Cet appareil numérique de la Classe B est conforme à la
norme NMB-003 du Canada.
THE STANDBY/ON SWITCH IS SECONDARY
CONNECTED AND THEREFORE DOES NOT SEPARATE
THE UNIT FROM MAINS POWER IN THE STANDBY
POSITION.
CAUTION
· Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
· The use of optical instruments with this product
will increase eye hazard.
5
En
INTRODUCTION
English
CONGRATULATIONS ON YOUR
PURCHASE OF THIS FINE PIONEER
PRODUCT.
Pioneer is on the leading edge of DVD research
for consumer products and this unit incorporates
the latest technological developments.
We are sure you will be fully satisfied with the
DVD player.
Thank you for your support.
Please read through these operating
instructions so you will know how to operate
your model properly. After you have finished
reading the instructions, put them away in a
safe place for future reference.
· This player is not suitable for commercial use.
This product incorporates copyright protection
technology that is protected by method claims
of certain U. S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of this
copyright protection technology must be
Authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision corporation. Reverse engineering or
disassembly is prohibited.