1
PLASMA DISPLAY : PDP-501MX/PDP-V501X
TABLE-TOP STAND: PDK-5001
SPEAKER SYSTEM: PDP-S02-LR
PRECAUTIONS
· We accept no responsibility for losses resulting from
the use of parts other than those supplied by us.
· We guarantee the performance of our products only
when they are assembled and adjusted as described in
this manual.
· The specifications and external designs shown in this
manual are subject to change without notice.
CAUTION
Exclamation marks placed within triangles are
intended to alert users to the presence of important
safety information. Be sure to read instructions
indicated by this symbol.
This manual provides precautions and information for installation, preparation, and handling of the plasma display and
its dedicated mounting hardware.
Before installation and preparation work, choose a safe and appropriate site after thorough consideration of construction,
materials used, strength, and surroundings. If the adequate safeguards are not in place, immediately halt the installation
process and discontinue marketing activities.
TECHNICAL MANUAL (Ver.1.1A)
About Mounting/Installation
· The product is sold under the assumption that in-
stallation will be performed by experienced, quali-
fied experts. Refer all mounting and installation work
to qualified personnel, or consult the nearest
PIONEER dealer for assistance.
· We accept no responsibility for accident or loss re-
sulting from failure to select an appropriate installa-
tion site, or for those occurring during assembly, in-
stallation, mounting, or operation of this product, or
resulting from modifications made to the product,
or from natural calamities.
2
FEATURES ................................................................................................................................................. 4
SPECIFICATIONS
2.1 Specifications ..................................................................................................................................................... 6
2.2 External dimensions ......................................................................................................................................... 10
2.3 Controls and connectors .................................................................................................................................. 12
2.4 Remote control unit .......................................................................................................................................... 14
INSTALLATION
3.1 Installation site requirements ........................................................................................................................... 16
3.2 Installation Conditions ...................................................................................................................................... 18
3.2.1 Heat dissipation ....................................................................................................................................... 18
3.2.2 Calculating heat quantity .......................................................................................................................... 19
3.2.3 Product mounting holes ........................................................................................................................... 19
3.2.4 Mount surface warping ............................................................................................................................ 21
3.3 Installation Procedures ..................................................................................................................................... 22
3.3.1 Transportation precautions ...................................................................................................................... 22
3.3.2 Unpacking ................................................................................................................................................ 22
3.3.3 Temporary installation using packing materials ....................................................................................... 23
3.3.4 Re-packing ............................................................................................................................................... 23
3.3.5 Wiring ...................................................................................................................................................... 24
3.4 Special Installation ............................................................................................................................................ 26
3.4.1 Mounting to fittings ................................................................................................................................. 26
3.4.2 Hanging on the wall ................................................................................................................................. 28
3.4.3 Embedding in the wall ............................................................................................................................. 30
3.4.4 Ceiling suspension (with wires) ............................................................................................................... 34
HOW TO USE THE STANDARD MOUNT EQUIPMENT
4.1 Standard mount equipment features and characteristics ................................................................................. 36
4.2 Handling the standard mount equipment ......................................................................................................... 37
4.2.1 Handling precautions ............................................................................................................................... 37
4.2.2 Precautions for installation contractors .................................................................................................... 37
4.3 Table-top Stand: PDK-5001 .............................................................................................................................. 38
4.3.1 Specifications ........................................................................................................................................... 38
4.3.2 Assembling the stand .............................................................................................................................. 39
4.3.3 Mounting to the main unit ....................................................................................................................... 40
4.4 Plasma Display Ceiling Suspension Hardware (one-sided type): PDK-5002
NOT AVALABLE IN USA
42
4.4.1 Specifications ........................................................................................................................................... 42
4.4.2 Assembling and installing the mounting hardware and mounting the plasma display ............................ 44
4.5 Tiltable Plasma Display Wall-Mount Hardware: PDK-5006
NOT AVALABLE IN USA
48
4.5.1 Specifications ........................................................................................................................................... 48
4.5.2 Assembling the mounting hardware and mounting the plasma display .................................................. 50
4.6 Speaker System: PDP-S02-LR .......................................................................................................................... 54
4.6.1 Specifications ........................................................................................................................................... 54
4.6.2 Mounting to the main unit ....................................................................................................................... 55
4.6.3 Mounting with the plasma ceiling-suspension hardware (PDK-5002) ..................................................... 56
4.6.4 Mounting with PDK-5006 (wall-mounting hardware) ............................................................................... 58
ADJUSTMENTS
5.1 Before Beginning Adjustments ........................................................................................................................ 60
5.1.1 Operating mode ....................................................................................................................................... 60
5.1.2 Combination use of remote, unit operation panel, and PC ...................................................................... 61
5.1.3 List of supported input signals ................................................................................................................. 62
5.1.4 List of adjustable and settable items ....................................................................................................... 65
5.1.5 Last memory ............................................................................................................................................ 69
5.1.6 Aging ........................................................................................................................................................ 69
5.2 Normal Operating Mode ................................................................................................................................... 70
5.2.1 About the normal operating mode ........................................................................................................... 70
5.3 Menu Mode ...................................................................................................................................................... 71
5.3.1 About menu mode ................................................................................................................................... 71
5.3.2 Example of menu mode operation .......................................................................................................... 72
Table of Contents
3
5.3.3 Settings in Menu Mode ........................................................................................................................... 74
1) Setting the three-dimensional Y/C separator ....................................................................................... 74
2) ABL On/Off .......................................................................................................................................... 74
3) MP mode On/Off ................................................................................................................................. 74
4) Auto power off ..................................................................................................................................... 76
5) Setting up peripheral equipment ......................................................................................................... 77
6) Setting the input signal format ............................................................................................................ 78
7) Setting the clamp position ................................................................................................................... 79
8) Setting the color system ...................................................................................................................... 81
5.3.4 Menu Layers ............................................................................................................................................ 82
1) Adjustments at Menu Layers-1 of 2 .................................................................................................... 82
2) Adjustments at Menu Layers-2 of 2 .................................................................................................... 83
5.4 Integrator Mode ............................................................................................................................................... 85
5.4.1 About the integrator mode ...................................................................................................................... 85
5.4.2 Example of integrator mode operation .................................................................................................... 86
5.4.3 Adjustments and settings in the integrator mode ................................................................................... 88
1) Adjusting the PICTURE parameters ..................................................................................................... 88
2) Adjusting the WHITE BALANCE parameters .......................................................................................89
3) Adjusting the SCREEN parameters ..................................................................................................... 90
4) Setting the color mode ........................................................................................................................ 91
5) Setting the baud rate ........................................................................................................................... 92
6) Mirror mode ......................................................................................................................................... 93
7) Setting STD-RGB ................................................................................................................................. 94
8) Adjusting the side mask ...................................................................................................................... 95
9) Initializing adjustments (TOTAL INITIALIZE) ........................................................................................ 96
5.4.4 Integrator mode menu layers .................................................................................................................. 97
5.4.5 PICTURE and WHITE BALANCE parameter memory area table ............................................................. 98
5.4.6 SCREEN parameter memory area table ................................................................................................ 100
5.5 RS-232C Adjustment Mode ........................................................................................................................... 103
5.5.1 About the RS-232C adjustment mode ................................................................................................... 103
5.5.2 Interface ................................................................................................................................................. 104
5.5.3 List of RC-232C commands ................................................................................................................... 105
5.5.4 About the GET commands .................................................................................................................... 107
5.6 Combination Connection ................................................................................................................................ 108
5.6.1 Connections ........................................................................................................................................... 108
5.6.2 Assigning IDs ......................................................................................................................................... 110
5.7 KEY LOCK/UNLOCK ....................................................................................................................................... 113
5.7.1 Functions ............................................................................................................................................... 113
5.7.2 How to switch KEY LOCK/UNLOCK ...................................................................................................... 113
OPERATING PRECAUTIONS AND RECOMMENDATIONS ................................................................ 114
6.1 About pseudo-contour .................................................................................................................................... 114
6.2 Cautions ......................................................................................................................................................... 114
Maintenance and Cleaning ................................................................................................................... 115
Table of Contents
CAUTION
· To prevent injury and material damage, thoroughly read this manual and all labels found on equipment before
attempting to mount, install, move, or adjust the product.
· Do not install the unit outside or in open air. Doing so will lead to water seepage into the system, resulting in fire
or electric shock.
· Be especially careful when working around parts of the system that have sharp edges.
· When performing installation work from a height, take suitable precautions to guard against falling. Set up a barrier
around the work site to prevent accidentally-dropped objects from injuring persons standing or walking below.
· Keep all foreign objects out of the unit. Do not tamper with the unit, or fire or electric shock may result.
· Observe the following operating environmental limitations:
Temperature: 0 to 40°C
Humidity: 20 to 80%
· Install the unit only in properly ventilated areas.
4
Features and Functions of the PDP-501MX Plasma Display
· High-definition XGA wide panel
The Display uses a high-definition XGA wide panel, which provides 1280 x 768 resolution with more than 980.000
pixels. This resolution is more than 2.5 times higher than that of conventional panels, and enables multimedia
information to be reproduced more vividly and accurately than ever before.
· Clear, high-quality image
Provides 8-bit RGB in 256 gradations/16.77 million colors. A new exclusive technology developed by Pioneer eliminates
the pseudo-contour anomaly, that is typically observed in plasma displays.
· Unrivalled brightness
A brightness of 350 cd/m2 (white peak, for panel unit), which is the highest so far for XGA panels, has been achieved by
maximizing light-emitting efficiency.
· Flat, lightweight design
The Pioneer plasma display monitor is also unrivalled in compactness: the 50-inch screen is only 98 mm in depth, and
weighs only 43.0 kg. It can therefore be mounted at locations where conventional displays are difficult to install.
· Supports a variety of signals from computers
Full specification PC are supported in video modes from VGA (640 x 480 resolution) to XGA (1024 x 762 resolution). The
SXGA (1280 x 1024 resolution) mode also accommodates PC signals, although a summary replay approach is employed
in this mode. The use of a dedicated video card also allowed access to a display of 1280 x 768 resolution, as well. This
monitor also supports HDTV broadcasts*.
Note:
* To display HDTV images on this monitor, an HDTV decoder, additionally.
· Optimized for industrial/public-address use
·
An RS-232C interface is provided for control from the exterior
·
The combination terminal enables a single PC to control multiple monitor systems
·
The integrator mode enables more precise adjustments than ever before
·
A color temperature (white balance) switching function is provided for retakes, and a key-lock feature prevents
accidental or unauthorized use of the monitor
·
Multiple input and output terminals (four inputs and eight outputs) are provided
Features
5
Features