ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2006
SPEAKER SYSTEM
PDP-S51
XZC/E5
ARP3425
T-ZZS OCT. 2006 Printed in Japan
· Do not pinch the connecting cord when attachting the speaker system.
· Make sure the L and R Holders are attached to the correct speakers.
· The speaker system is not serviceable and must be exchanged.
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-
yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to
properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the
warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk
trying to do so and refer the repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to
cause cancer, birth defects or other reproductive harm.
Health & Safety Code Section 25249.6 Proposition 65
1. REASSEMBLY AND DISASSEMBLY PRECAUTIONS
2
1
23
4
12
3
4
C
D
F
A
B
E
PDP-S51
No.6
Speaker Mounting Bracket RB
No.4
Speaker Mounting Bracket RT
No.5
Speaker Mounting Bracket LB
No.3
Speaker Mounting Bracket LT
For LEFT-TOP
For LEFT-BOTTOM
For RIGHT-BOTTOM
For RIGHT-TOP
Lch.
Rch.
2
1
3
4
8(1/4)
8(2/4)
8(3/4)
8(3/4)
8(4/4)
8(2/4)
5
6
9
Lch.
Rch.
TOP
BOTTOM
7
Speaker Cable
Cushion
Polyethylene Bag
Polyethylene Bag
Polyethylene Bag
Label Lot
2. EXPLODED VIEWS AND PARTS LIST
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
NOTES:
1
Speaker L
AZX1073
2
Speaker R
AZX1074
3
SP Mounting Bracket LT
AZN2710
4
SP Mounting Bracket RT
AZN2711
5
SP Mounting Bracket LB
AZN2712
6
SP Mounting Bracket RB
AZN2713
7
Screw Assy
AZE1190
NSP
Speaker Mounting Screw(M4x10)
· · · · · ·
(Speaker-Bracket)
NSP
Speaker Mounting Screw(M5x10)
· · · · · ·
(Bracket-Display)
8
Packing Set
AZH1289
9
Operating Instructions
AZR1222
(English, French)
PACKING Parts List
2.1 PACKING
Mark No.
Description
Part No.
Input
Red
L1
0.2 mH
3.3
µF/50 V
C2
Black
Red
Red
Black
Blue
Black
Black
Woofer 1
Tweerer
Woofer 2
Network Assy
3. SCHEMATIC DIAGRAM