PLASMA DISPLAY SYSTEM
SYSTEME D'ÉCRAN PLASMA
PLASMA DISPLAY-SYSTEM
PDP-436SXE
Operating Instructions
Mode d'emploi
Bedienungsanleitung
Discover the benefits of registering your product online at
www.pioneer.co.uk (or www.pioneer-eur.com).
Découvrez les nombreux avantages offerts en enregistrant votre produit
en ligne maintenant sur www.pioneer.fr (ou www.pioneer-eur.com).
Bitte nutzen Sie die Möglichkeit zur Registrierung Ihres Produktes unter
www.pioneer.de (oder www.pioneer-eur.com)
PDP-436SXE.book Page 1 Tuesday, November 8, 2005 10:04 AM
The wire which is coloured brown must be connected to
the terminal which is marked with the letter L or coloured
red.
NOTE
After replacing or changing a fuse, the fuse cover in the
plug must be replaced with a fuse cover which
corresponds to the colour of the insert in the base of the
plug or the word that is embossed on the base of the plug,
and the appliance must not be used without a fuse cover.
If lost replacement fuse covers can be obtained from your
dealer.
Only 13 A fuses approved by B.S.I or A.S.T.A to B.S.1362
should be used.
P3-4-2-1-2-1_En
The wires in this mains lead are coloured in
accordance with the following code:
Green and Yellow
: Earth
Blue
: Neutral
Brown
: Live
If the plug provided is unsuitable for your socket outlets,
the plug must be cut off and a suitable plug fitted.
IMPORTANT
FOR USE IN THE UNITED
KINGDOM.
The cut-off plug should be disposed of and must not be
inserted into any 13 amp socket as this can result in
electric shock. The plug or adaptor or the distribution
panel should be provided with 13 A fuse. As the colours of
the wires in the mains lead of this appliance may not
correspond with coloured markings identifying the
terminals in your plug, proceed as follows ;
The wire which is coloured green and yellow must be
connected to the terminal in the plug which is marked
with the letter E or by the earth symbol
, or coloured
green or green and yellow.
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured
black.
Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service
personnel.
PDP-436SXE.book Page 2 Tuesday, November 8, 2005 10:04 AM
English
WARNING
This apparatus must be earthed.
The following symbols are found on labels
attached to the product. They alert the operators
and service personnel of this equipment to any
potentially dangerous conditions.
STANDBY/ON Button
STANDBY: When placed into the standby mode, the main
power flow is cut and the unit is no longer fully
operational.
STANDBY/ON Indicator
The indicator is lit red when the unit is in the standby mode
and is lit blue when it is in the power-on mode.
WARNING
This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filed with liquid
near this equipment (such as a vase or flower pot) or
expose it to dripping, splashing, rain or moisture.
D3-4-2-1-3_A_En
This product complies with the Low Voltage Directive (73/23/EEC,
amended by 93/68/EEC), EMC Directives (89/336/EEC, amended by
92/31/EEC and 93/68/EEC).
WARNING
The voltage of the available power supply differs according
to country or region. Be sure that the power supply voltage
of the area where this unit will be used meets the required
voltage (e.g., 230V or 120V) written on the rear panel.
D3-4-2-1-4_A_En
Before plugging in for the first time, read the following
section carefully.
WARNING
This product equipped with a three-wire grounding
(earthed) plug - a plug that has a third (grounding) pin. This
plug only fits a grounding-type power outlet. If you are
unable to insert the plug into an outlet, contact a licensed
electrician to replace the outlet with a properly grounded
one. Do not defeat the safety purpose of the grounding
plug.
D3-4-2-1-6_A_En
WARNING
This symbol refers to a hazard or unsafe
practice which can result in personal injury
or property damage.
CAUTION
This symbol refers to a hazard or unsafe
practice which can result in severe personal
injury or death.
WARNING
To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
D3-4-2-1-7a_A_En
VENTILATION CAUTION
When installing this unit, make sure to leave space around
the unit for ventilation to improve heat radiation. For the
minimum space required, see page 14.
WARNING
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the product, and
to protect it from overheating. To prevent fire hazard, the
openings should never be blocked or covered with items
(such as newspapers, table-cloths, curtains) or by operating
the equipment on thick carpet or a bed.
CAUTION
The power switch does not completely separate the unit
from the mains in off position. Therefore install the unit
suitable places easy to disconnect the mains plug in case of
the accident. The mains plug of unit should be unplugged
from the wall socket when left unused for a long period of
time.
00_Precaution.fm Page 3 Wednesday, November 9, 2005 3:22 PM
4
En
Contents
Contents
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly. After you have finished
reading the instructions, put them away in a safe place for future reference.
In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the
explanatory drawings. However the method of connecting and operating the unit is the same.
01 Important User Guidance Information
02 Safety Precautions
03 Supplied Accessories
04 Part Names
Plasma Display ..........................................12
Remote control unit ..................................13
05 Preparation
Installing the Plasma Display ..................14
Preventing the Plasma Display from
Falling Over ................................................14
Basic connections ....................................15
Connecting the power cord .................15
Connecting to an antenna ...................16
Preparing the remote control unit ...........17
Inserting batteries ................................17
Cautions regarding batteries ...............17
Allowed operation range of the remote
control unit ............................................17
Cautions regarding the remote control
unit .........................................................17
06 Watching TV
Turning on/ off the power .........................18
Changing channels ...................................19
Tuning to your favourite (analogue)
channels ....................................................20
Changing the volume and sound ............20
Freezing images ........................................22
07 Menu Setup
Using the menu .........................................23
Menu operations ..................................23
08 Basic Adjustment Settings
Setting up analogue TV channels
automatically .............................................24
Using Auto Installation ........................24
Setting up TV channels manually ............24
Using Manual Adjust ...........................24
Reducing video noise ...........................25
Setting Child Lock ................................25
Selecting a decoder input terminal ... 25
Labelling TV channels ......................... 26
Sorting preset TV channels ................. 26
Clock setting ........................................ 26
Language setting ...................................... 27
AV Selection ............................................. 27
Basic picture adjustments ...................... 28
Advanced picture adjustments ............... 28
Using PureCinema .............................. 28
Using Colour Temp .............................. 29
Using CTI .............................................. 29
Using Colour Management ................ 29
Eliminating noise from images .......... 30
Using the Dynamic Range Expander
(DRE) functions ................................... 30
Using the 3DYC and I-P Mode ............ 30
Sound adjustments .................................. 31
FOCUS .................................................. 31
Front Surround .................................... 31
Power Control ........................................... 32
09 Enjoying DTV broadcasts
Watching DTV programmes .................... 33
Changing channels ............................. 33
Viewing a channel banner .................. 33
Viewing subtitles .................................. 33
Reconfiguring the DTV channel
settings ...................................................... 34
Reselecting a country ......................... 34
Replacing the existing channels ........ 34
Adding new channels ......................... 34
Checking signal strength .................... 35
Switching on/off the power to the
antenna ................................................ 35
Restoring the system defaults ............ 35
Customizing channel related settings .... 36
Setting Channel Options ..................... 36
Activating the Favourites function ..... 36
Activating the Auto Skip ..................... 36
Setting the Child Lock ......................... 37
Sorting preset DTV channels .............. 37
Selecting a digital audio format .............. 37
Selecting languages for audio, subtitles,
and teletext ............................................... 38
PDP-436SXE.book Page 4 Tuesday, November 8, 2005 10:04 AM
5
En
Contents
English
Using Software Update ............................ 38
Using Auto Update .............................. 38
Setting Update Time ............................ 38
Starting Manual Update ...................... 38
Displaying technical information ....... 39
Using MHEG application (UK only) .... 39
Screen Saver ............................................. 39
Common Interface ................................... 39
Inserting a CA Card ............................. 39
10 Using the Electronic Programme Guide
(EPG)(for DTV only)
EPG display format ................................... 40
Using the EPG .......................................... 41
Presetting TV programmes using
the EPG ..................................................... 42
Using auto channel select and standby
recording .............................................. 42
Setting the timer manually ................. 43
Priority rules for overlapped
presettings ........................................... 43
Changing/cancelling TV programme
presettings ........................................... 44
Changing priorities for overlapped
presettings ........................................... 44
Using other useful EPG functions .......... 45
EPG Jump ............................................. 45
EPG Search .......................................... 45
11 Useful Adjustment Settings
Switching the vertical drive frequency ... 46
Adjusting image positions ....................... 46
Selecting an input signal type ................. 46
Colour system setting .............................. 46
Selecting a screen size manually ........... 47
Selecting a screen size automatically .... 47
Selecting a screen size for received
4:3 aspect ratio signals ....................... 47
Changing the brightness at both sides
of the screen (Side Mask) ........................ 48
Sleep Timer ............................................... 48
Using a password ..................................... 48
Entering a password ............................ 48
Changing the password ...................... 49
Resetting the password function ....... 49
Disabling the password function ....... 49
12 Enjoying through External Equipment
Watching a decoder image ..................... 50
Connecting a decoder ......................... 50
Displaying a decoder image ............... 50
Watching a VCR image ............................ 50
Connecting a VCR ................................ 50
Displaying a VCR image ...................... 50
Using HDMI Input .................................... 51
Connecting HDMI equipment ............ 51
Using i/o Link.A ........................................ 52
Watching a DVD image ........................... 52
Connecting a DVD player .................... 52
Displaying a DVD image ..................... 52
Enjoying a game console or watching
camcorder images ................................... 53
Connecting a game console or
camcorder ............................................ 53
Displaying an image from the game
console or camcorder ......................... 53
Enjoying through audio equipment in
connection ................................................ 53
Connecting audio equipment ............. 53
Using the SCART output function ........... 54
Switching the SCART output .............. 54
13 Using the Teletext Functions
What is Teletext? ....................................... 55
Operating the Teletext basics .................. 55
Turning on and off Teletext ................. 55
Selecting and operating Teletext
pages .................................................... 55
Displaying subpages ........................... 56
Displaying TOP Over View ................... 56
Displaying subtitle pages .................... 56
14 Appendix
Troubleshooting ........................................ 57
Connecting pin assignments
for SCART .................................................. 58
Specifications ........................................... 59
PDP-436SXE.book Page 5 Tuesday, November 8, 2005 10:04 AM