Operating Instructions
Mode d'emploi
Bedienungsanleitung
PLASMA DISPLAY SYSTEM
SYSTEME D'ÉCRAN PLASMA
PLASMA DISPLAY-SYSTEM
PDP-503HDE
PDP-433HDE
PDP-503HDE/(HYO1)
9/3/02, 1:30 PM
1
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know
how to operate your model properly. After you have finished read-
ing the instructions, put them away in a safe place for future
reference.
In some countries or regions, the shape of the power plug and
power outlet may sometimes differ from that shown in the ex-
planatory drawings. However the method of connecting and op-
erating the unit is the same.
WARNING: BEFORE PLUGGING IN THE UNIT FOR THE FIRST
TIME, READ THE FOLLOWING SECTION CAREFULLY.
THE VOLTAGE OF THE AVAILABLE POWER SUPPLY DIFFERS
ACCORDING TO COUNTRY OR REGION. BE SURE THAT THE
POWER SUPPLY VOLTAGE OF THE AREA WHERE THIS UNIT WILL
BE USED MEETS THE REQUIRED VOLTAGE (E.G. 230V OR 120V)
WRITTEN ON THE REAR PANEL.
WARNING: THIS PRODUCT EQUIPPED WITH A THREE-WIRE
GROUNDING (EARTHLING) TYPE PLUG. A PLUG HAVING A THIRD
(GROUNDING, EARTHLING) PIN, IT WILL ONLY FIT INTO A
GROUNDING (EARTHLING) TYPE POWER OUTLET. THIS IS A
SAFETY FEATURE. IF YOU ARE UNABLE TO INSERT THE PLUG
INTO THE OUTLET, CONTACT YOUR ELECTRICIAN TO REPLACE
YOUR OBSOLETE OUTLET. DO NOT DEFEAT THE SAFETY
PURPOSE OF THE GROUNDING (EARTHLING) TYPE PLUG.
The following symbols are found on labels
attached to the product. They alert the operators
and service personnel of this equipment to any
potentially dangerous conditions.
WARNING
This symbol refers to a hazard or unsafe
practice which can result in personal injury or
property damage.
CAUTION
This symbol refers to a hazard or unsafe
practice which can result in severe personal
injury or death.
WARNING: NO NAKED FLAME SOURCES SUCH AS LIGHTED
CANDLE, SHOULD BE PLACED ON THE APPARATUS.
IF NAKED FLAME SOURCES ACCIDENTALLY FALL DOWN, FIRE
SPREAD OVER THE APPARATUS THEN MAY CAUSE FIRE.
VENTILATION: WHEN INSTALLING THIS UNIT, MAKE SURE
TO LEAVE SPACE AROUND THE UNIT FOR VENTILATION TO
IMPROVE HEAT RADIATION (AT LEAST 50 CM AT TOP, 10 CM AT
REAR, AND 10 CM AT EACH SIDE.)
WARNING: SLOTS AND OPENINGS IN THE CABINET ARE
PROVIDED FOR VENTILATION AND TO ENSURE RELIABLE
OPERATION OF THE PRODUCT AND TO PROTECT IT FROM
OVERHEATING, TO PREVENT FIRE HAZARD, THE OPENINGS
SHOULD NEVER BE BLOCKED AND COVERED WITH ITEMS, SUCH
AS NEWSPAPERS, TABLE-CLOTHS, CURTAINS, ETC. ALSO DO
NOT PUT THE APPARATUS ON THE THICK CARPET, BED, SOFA,
OR FABRIC. HAVING A THICK PILE.
PDP-503HDE/(WARNING)
8/31/02, 5:06 PM
1
1
Dear customer
Thank you for your purchase of the PIONEER product. To ensure safety and many years of trouble-free operation
of your product, please read the Safety Precautions carefully before using this product.
Contents
Dear customer
................................................... 1
Contents ............................................................ 1
Important User Guidance Information ..................... 2
Safety precautions
............................................. 3
Features ............................................................ 4
Supplied accessories .......................................... 5
Plasma Display ................................................ 5
Media Receiver
............................................. 5
Preparation ......................................................... 6
Installing the Plasma Display .............................. 6
Setting the system .......................................... 7
Using the remote control unit .............................. 8
Cautions regarding remote control unit
......... 8
Inserting the batteries ................................. 8
Cautions regarding batteries ........................ 8
Part names ......................................................... 9
Plasma Display ................................................ 9
Media Receiver
............................................. 10
Remote control unit .......................................... 11
Watching TV
...................................................
12
Basic connection ............................................. 12
Connecting to an antenna ........................... 12
Connecting to the power cord ..................... 12
Turning on the power ....................................... 13
Turning off the power ....................................... 13
Initial auto installation ....................................... 14
Simple button operations for changing channels ... 16
Simple button operation for changing
volume/sound
.......................................... 17
Basic adjustment settings .................................
20
AV mode menu items ....................................... 20
PC mode menu items ....................................... 21
Moving the picture on the screen ........................ 22
Auto installation
............................................. 23
Language setting ....................................... 23
Country setting .......................................... 23
Programme auto search .............................. 24
Auto labelling
.......................................... 24
Auto sorting ............................................. 25
Preset download ....................................... 25
Programme setup ............................................. 26
Auto search ............................................. 26
Manual setting for each channel .................. 26
Additional channels entry
..................... 27
Fine tuning .......................................... 27
Colour system
.................................... 27
Sound system
.................................... 28
Labelling channels .............................. 28
Skipping channels
.............................. 28
Setting the decoder .............................. 29
Setting the child lock
........................... 29
Sort ......................................................... 30
Language setting ............................................. 31
Picture adjustments .......................................... 32
Colour temperature .................................... 33
Black ...................................................... 33
Black & White
.......................................... 34
PureCinema ............................................. 34
Sound adjustment
.......................................... 35
Power control
................................................ 36
Power control for AV source ........................ 36
Power control for PC source ........................ 37
Using external equipment .................................
38
Watching a decoder image
.............................. 39
Connecting a decoder ................................. 39
Displaying a programme .............................. 39
Watching a VCR image .................................... 40
Connecting a VCR
.................................... 40
Displaying a VCR image .............................. 40
Using i/o Link.A
............................................. 41
Watching a DVD image .................................... 42
Connecting a DVD player ........................... 42
Displaying a DVD image .............................. 42
Enjoying a game console and viewing camcorder
images
................................................... 43
Connecting a game console or camcorder ...... 43
Displaying an image of the game player
and camcorder .................................... 43
Viewing an image from a computer ..................... 44
Connecting a computer .............................. 44
Displaying an image from a computer ............ 44
Control cord connection .................................... 45
How to route cables .......................................... 46
Useful adjustment settings
..............................
47
Image position (AV mode only) ........................... 47
Noise reduction (NR) (AV mode only) .................. 47
Auto Sync. adjustment (PC mode only) ............... 48
Fine Sync. adjustment (PC mode only)
............... 48
Input signal source .......................................... 49
Colour system setting (AV mode only) .................. 50
AV selection ................................................... 50
WIDE mode ................................................... 51
Wide screen signalling (WSS) (AV mode only) ...... 52
Picture aspect ratio (AV mode only) ..................... 52
Audio out ...................................................... 53
Sleep timer
................................................... 53
Password setting for Child lock (AV mode only) ...... 54
Useful features ................................................
55
Multiscreen functions ....................................... 55
Teletext function ............................................. 57
Appendix
......................................................... 59
Troubleshooting
............................................. 59
Computer compatibility chart .............................. 60
Connecting pin assignments for SCART ............... 61
Specifications ................................................ 62
PDP-503HDE/(E)-a
8/31/02, 5:08 PM
1
2
Important User Guidance Information
In order to obtain maximum enjoyment from this Pioneer PureVision PDP-503HDE/PDP-433HDE Plasma Display System,
please first read this information carefully.
With the Pioneer PureVision PDP-503HDE/PDP-433HDE, you can be assured of a high quality Plasma Display System with
long-life and high reliability. To achieve images of exceptional quality, this Pioneer Plasma Display System incorporates
state-of-the-art design and construction, as well as very precise and highly advanced technology. On a total of nearly 3
million light cells, more than 99.999 percent of the cells remain active.
Over the course of its lifetime, the luminosity of the Pioneer PDP-503HDE/PDP-433HDE Plasma Display System will diminish
very slowly, such as with all phosphor-based screens (for example, a traditional tube-type television). To enjoy beautiful
and bright images on your Pioneer Plasma Display System for a long time, please carefully read and follow the usage
guidances below:
Usage guidelines
All phosphor-based screens (including conventional tube-type televisions) can be affected by displaying static images for
a prolonged period. Plasma Display System's are no exception to this rule. After-image and permanent effects on the
screen can be avoided by taking some basic precautions. By following the recommendations listed below, you can ensure
longer and satisfactory results from your plasma:
· Whenever possible, avoid frequently displaying the same image or virtually still moving pictures (e.g. closed-captioned
images or video game images which have static portions).
· Do not display Teletext for a prolonged period of time.
· Avoid viewing the On Screen Display for extended periods, from a decoder, DVD player, VCR and all other components.
· Do not leave the same picture freeze-framed or paused continuously over a long period of time, when using the still
picture mode from a TV, VCR, DVD player or any other component.
· Images which have both very bright areas and very dark areas side by side should not be displayed for a prolonged
period of time.
· When playing a game, the "GAME" mode setting within "AV SELECTION" is strongly recommended. However, please
limit its use to less than 2 hours at a time.
· After playing a game, or displaying a PC image or any still image, it is best to view a normal moving picture in
the "WIDE" or "FULL" screen setting for more than 3 times the length of the previous still moving image.
· After using the Plasma Display System, always switch the display to "STAND BY" mode.
Installation guidelines
The Pioneer PureVision PDP-503HDE/PDP-433HDE Plasma Display System incorporates a very thin design. To ensure
safety, please take the proper measures to mount or install the Plasma Display, in order to prevent the unit from tipping over
in the event of vibration or accidental movement.
This product should be installed by using only parts and accessories designed by PIONEER. Use of accessories other than
the PIONEER stand or installation bracket may result in instability, and could cause injury. For custom installation, please
consult the dealer where the unit was purchased. To ensure correct installation, experienced and qualified experts must
install the unit. PIONEER will not be held responsible for accident or damage caused by the use of parts and accessories
manufactured by other companies.
To avoid malfunction and overheating, make sure that the vents on the main unit are not blocked when installing to ensure
proper heat emission:
· Distance the unit slightly from other equipment, walls, etc. (more than 10 cm)
· Do not fit the unit inside narrow spaces where ventilation is poor.
· Do not cover with a cloth, etc.
· Clean the vents on the sides and rear of the unit to remove dust build-up, by using a vacuum cleaner set to its lowest
suction setting.
Using the unit without proper ventilation may cause the internal temperature to rise, and could result in possible malfunction.
When the surrounding or internal temperature exceeds a certain degree, the display will automatically power off in order to
cool the internal electronics and prevent hazardous occurrences.
Any malfunction may occur due to: an inappropriate installation site, improper assembly, installation, mounting, or operation
of this product, modifications made to the product. However, PIONEER cannot be held responsible for such accidents or
malfunction.
A
Typical effects and characteristics of a phosphor-based matrix display, e.g. permanent residual images upon the phosphor
of the panel, and the existence of a minute number of inactive light cells in the screen, are not covered by local warranties.
PDP-503HDE/(E)-a
8/31/02, 5:08 PM
2
3
Safety precautions
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage
if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please
observe the following instructions when installing, operating and cleaning the product. To ensure your safety
and prolong the service life of your product, please read the following precautions carefully before using the
product.
1.
Read instructions--All operating instructions must be read and understood before the product is operated.
2.
Keep this manual in a safe place--These safety and operating instructions must be kept in a safe place for future
reference.
3.
Observe warnings--All warnings on the product and in the instructions must be observed closely.
4.
Follow instructions--All operating instructions must be followed.
5.
Cleaning--Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the
product. Do not use liquid cleaners or aerosol cleaners.
6.
Attachments--Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can
result in accidents.
7.
Water and moisture--Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub,
swimming pool and in a wet basement.
8.
Stand--Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable
base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only
a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting
the product on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended
by the manufacturer.
9.
When relocating the product placed on a cart, it must be moved with utmost care. Sudden
stops, excessive force and nueven floor surface can cause the product to fall from the cart.
10. Ventilation--The vents and other openings in the cabinet are designed for ventilation. Do not
cover or block these vents and openings since insufficient ventilation can cause overheating
and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other
similar surface, since they can block ventilation openings. This product is not designed for built-
in installation; do not place the product in an enclosed place such as a bookcase or rack,
unless proper ventilation is provided or the manufacturer's instructions are followed.
11. Power source--This product must operate on a power source specified on the specification label. If you are not sure
of the type of power supply used in your home, consult your dealer or local power company.
12. Power cord protection--The power cords must be routed properly to prevent people from stepping on them or
objects from resting on them. Check the cords at the plugs and product.
13. The plasma Display used in this product is made of glass. Therefore, it can break when the product is dropped or
applied with impact. Be careful not to be injured by broken glass pieces in case the plasma Display breaks.
14. Overloading--Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.
15. Entering of objects and liquids--Never insert an object into the product through vents or openings. High voltage
flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same
reason, do not spill water or liquid on the product.
16. Servicing--Do not attempt to service the product yourself. Removing covers can expose you to high voltage and
other dangerous conditions. Request a qualified service person to perform servicing.
17. Repair--If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified
service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid was spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper adjustment of
controls not described in the instructions can cause damage, which often requires extensive adjustment work
by a qualified technician.
e. When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that
the product needs servicing.
18. Replacement parts--In case the product needs replacement parts, make sure that the service person uses
replacement parts specified by the manufacturer, or those with the same characteristics and performance as the
original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.
19. Safety checks--Upon completion of service or repair work, request the service technician to perform safety checks
to ensure that the product is in proper operating condition.
20. Wall or ceiling mounting--When mounting the product on a wall or ceiling, be sure to install the product according
to the method recommended by the manufacturer.
21. Heat sources--Keep the product away from heat sources such as radiators, heaters, stoves and other heat- generating
products (including amplifiers).
22. Unplug the power cord from the AC outlet before installing the speakers.
PDP-503HDE/(E)-a
8/31/02, 5:08 PM
3