PIONEER PDP-4280XA/WYVIXK5 - Owner's Manual Immediate Download

5080

PDP-

4280

PDP-

Operating Instructions | Mode d'emploi | Bedienungsanleitung |

Istruzioni di utilizzo | Handleiding | Manual de instrucciones

PLASMA TELEVISION

TÉLÉVISEUR PLASMA

PLASMA-FERNSEHER

TELEVISORE AL PLASMA

PLASMA-TELEVISIE

TELEVISOR DE PLASMA

PDP-5080XA_En.book Page 1 Monday, May 14, 2007 11:33 AM

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

"dangerous voltage" within the product's

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

CAUTION:

TO PREVENT THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT

D3-4-2-1-1_En-A

Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified

service personnel.

IMPORTANT: THE MOULDED PLUG

This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the

fuse need to be replaced, please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark

or the BSI mark

on the body of the fuse.

If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug

must not be used until a replacement cover is obtained. A replacement fuse cover can be obtained from your local dealer.

If the fitted moulded plug is unsuitable for your socket outlet, then the fuse shall be removed and the plug cut off and disposed of

safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.

If a new plug is to be fitted, please observe the wiring code as shown below. If in any doubt, please consult a qualified electrician.

WARNING : THIS APPARATUS MUST BE EARTHED.

IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:

Green & Yellow : Earth

Blue : Neutral

Brown : Live

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in

your plug, proceed as follows ;

The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked with the letter

E or

by the earth symbol

or coloured GREEN or GREEN-AND-YELLOW.

The wire which is coloured BLUE must be connected to the terminal which is marked with the

letter

N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the

letter

L or coloured RED.

How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.

D3-4-2-1-2-1_B_En

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used

electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to

designated collection facilities or to a retailer (if you purchase a similar new one).

For countries not mentioned above, please contact your local authorities for the correct method of disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential

negative effects on the environment and human health.

K058_A_En

PDP-5080XA_En.book Page 2 Monday, May 14, 2007 11:33 AM

English

WARNING

This equipment is not waterproof. To prevent a fire

or shock hazard, do not place any container filed

with liquid near this equipment (such as a vase or

flower pot) or expose it to dripping, splashing, rain

or moisture.

D3-4-2-1-3_A_En

The following symbols are found on labels attached

to the product. They alert the operators and service

personnel of this equipment to any potentially

dangerous conditions.

This product complies with the Low Voltage Directive

2006/95/EC and EMC Directive 89/336/EEC,

amended by 92/31/EEC and 93/68/EEC.

WARNING

This product equipped with a three-wire grounding

(earthed) plug - a plug that has a third (grounding)

pin. This plug only fits a grounding-type power

outlet. If you are unable to insert the plug into an

outlet, contact a licensed electrician to replace the

outlet with a properly grounded one. Do not

defeat the safety purpose of the grounding plug.

D3-4-2-1-6_A_En

WARNING

The voltage of the available power supply differs

according to country or region. Be sure that the

power supply voltage of the area where this unit

will be used meets the required voltage (e.g., 230 V

or 120 V) written on the rear panel.

D3-4-2-1-4_A_En

Before plugging in for the first time, read the following

section carefully.

CAUTION

The

switch on this unit will not completely shut off

all power from the AC outlet. Since the power cord

serves as the main disconnect device for the unit,

you will need to unplug it from the AC outlet to shut

down all power. Therefore, make sure the unit has

been installed so that the power cord can be easily

unplugged from the AC outlet in case of an

accident. To avoid fire hazard, the power cord should

also be unplugged from the AC outlet when left

unused for a long period of time (for example, when

on vacation).

D3-4-2-2-2a_A_En

WARNING

CAUTION

This symbol refers to a hazard or unsafe practice

which can result in personal injury or property

damage.

This symbol refers to a hazard or unsafe practice

which can result in severe personal injury or death.

VENTILATION CAUTION

When installing this unit, make sure to leave space

around the unit for ventilation to improve heat

radiation. For the minimum space required, see

page 14.

WARNING

Slots and openings in the cabinet are provided for

ventilation to ensure reliable operation of the

product, and to protect it from overheating. To

prevent fire hazard, the openings should never be

blocked or covered with items (such as

newspapers, table-cloths, curtains) or by operating

the equipment on thick carpet or a bed.

STANDBY/ON Button

STANDBY: When placed into the standby mode,

the main power flow is cut and the unit is no

longer fully operational.

STANDBY/ON Indicator: The indicator is lit red

when the unit is in the standby mode and is lit blue

when it is in the power-on mode.

Operating Environment

Operating environment temperature and humidity:

+0°C to +40°C (+32°F to +104°F); less than 85 %RH

(cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in

locations exposed to high humidity or direct sunlight (or

strong artificial light)

D3-4-2-1-7c_A_En

WARNING

To prevent a fire hazard, do not place any naked

flame sources (such as a lighted candle) on the

equipment.

D3-4-2-1-7a_A_En

page 14

PDP-5080XA_En.book Page 3 Monday, May 14, 2007 11:33 AM

Contents

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the

instructions, put them away in a safe place for future reference.

In some countries of regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory

drawings. However the method of connecting and operating the unit are the same.

Contents

01 Important user information . . . . . . . . . 5

02 Safety precautions . . . . . . . . . . . . . . . . . 8

Installation precautions

. . . . . . . . . . . . . . . . . . . . . . . 9

03 Supplied accessories . . . . . . . . . . . . . . 10

04 Part names . . . . . . . . . . . . . . . . . . . . . . 11

Plasma television

. . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Remote control unit

. . . . . . . . . . . . . . . . . . . . . . . . . 13

05 Preparation . . . . . . . . . . . . . . . . . . . . . . 14

Installing the plasma television

. . . . . . . . . . . . . . . . 14

Moving the plasma television

. . . . . . . . . . . . . . . . . . 14

Preventing the plasma television from falling over

. . 15

Attaching/detaching the Pioneer stand

(for PDP-4280XA only)

. . . . . . . . . . . . . . . . . . . . . 16

Basic connections

. . . . . . . . . . . . . . . . . . . . . . . . . . 17

Preparing the remote control unit

. . . . . . . . . . . . . . 19

Operating range of the remote control unit

. . . . . . . 19

06 Watching TV . . . . . . . . . . . . . . . . . . . . . 20

Turning the power on

. . . . . . . . . . . . . . . . . . . . . . . . 20

Placing the system into standby

. . . . . . . . . . . . . . . 20

Changing channels

. . . . . . . . . . . . . . . . . . . . . . . . . 21

Tuning to your favourite channels

. . . . . . . . . . . . . . 21

Changing the volume and sound

. . . . . . . . . . . . . . . 21

Switching the broadcast audio channel

. . . . . . . . . . 22

Freezing images

. . . . . . . . . . . . . . . . . . . . . . . . . . . 22

07 The HOME MENU . . . . . . . . . . . . . . . . . 23

HOME MENU overview

. . . . . . . . . . . . . . . . . . . . . . 23

Using the HOME MENU

. . . . . . . . . . . . . . . . . . . . . . 23

08 Setting up. . . . . . . . . . . . . . . . . . . . . . . 24

Setting up TV channels

. . . . . . . . . . . . . . . . . . . . . . 24

Setting up analogue TV channels manually

. . . . . . . 24

Reducing video noise

. . . . . . . . . . . . . . . . . . . . . . . . 25

Setting Child Lock

. . . . . . . . . . . . . . . . . . . . . . . . . . 25

Selecting a decoder input terminal

. . . . . . . . . . . . . 25

Labeling TV channels

. . . . . . . . . . . . . . . . . . . . . . . . 26

Sorting preset TV channels

. . . . . . . . . . . . . . . . . . . 26

Language setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . 27

AV Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Basic picture adjustments

. . . . . . . . . . . . . . . . . . . . 28

Advanced picture adjustments

. . . . . . . . . . . . . . . . 29

Comparing picture adjustments on the screen

. . . . 32

Sound adjustments

. . . . . . . . . . . . . . . . . . . . . . . . . 33

Power Control

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

09 Useful adjustment settings. . . . . . . . . 35

Switching the vertical drive mode

(AV source only)

. . . . . . . . . . . . . . . . . . . . . . . . . . 35

Adjusting image positions

(AV source only)

. . . . . . . . . . . . . . . . . . . . . . . . . . 35

Adjusting image positions and clock automatically

(PC source only)

. . . . . . . . . . . . . . . . . . . . . . . . . . 36

Adjusting image positions and clock manually

(PC source only)

. . . . . . . . . . . . . . . . . . . . . . . . . . 36

Selecting an input signal type

. . . . . . . . . . . . . . . . . 36

Colour system setting

. . . . . . . . . . . . . . . . . . . . . . . 36

Selecting a game mode

. . . . . . . . . . . . . . . . . . . . . . 37

Selecting a screen size manually

. . . . . . . . . . . . . . . 37

Selecting a screen size automatically

. . . . . . . . . . . 38

Illustrations shown in this manual are for the PDP-5080XA unless otherwise specified.

PDP-5080XA_En.book Page 4 Monday, May 14, 2007 11:33 AM

Contents/Important user information

English

Detecting side masks

. . . . . . . . . . . . . . . . . . . . . . . . 38

Changing the brightness at both sides of the screen

(Side Mask)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Blue LED Dimmer

. . . . . . . . . . . . . . . . . . . . . . . . . . 39

Orbiter

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Video Pattern

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Sleep Timer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Using a password

. . . . . . . . . . . . . . . . . . . . . . . . . . 39

10 Using with other equipment . . . . . . . . 41

Connecting a DVD player

. . . . . . . . . . . . . . . . . . . . . 41

Connecting a decoder

. . . . . . . . . . . . . . . . . . . . . . . 41

Connecting a VCR

. . . . . . . . . . . . . . . . . . . . . . . . . . 42

Connecting a game console or camcorder

. . . . . . . . 42

Connecting a personal computer

. . . . . . . . . . . . . . . 43

Connecting an amplifier/AV receiver

. . . . . . . . . . . . 43

Using the HDMI Input

. . . . . . . . . . . . . . . . . . . . . . . 44

Connecting control cords

. . . . . . . . . . . . . . . . . . . . . 46

Using i/o link.A

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

11 Using the HDMI Control . . . . . . . . . . . . 48

Using the HDMI Control functions

. . . . . . . . . . . . . . 48

Making the HDMI Control connections

. . . . . . . . . . 49

Setting the HDMI Control

. . . . . . . . . . . . . . . . . . . . . 51

Using the HDMI Control menus

. . . . . . . . . . . . . . . . 53

12 Using Teletext . . . . . . . . . . . . . . . . . . . . 54

Using the Teletext Functions

. . . . . . . . . . . . . . . . . . 54

Operating the Teletext basics

. . . . . . . . . . . . . . . . . . 54

13 Additional information . . . . . . . . . . . . 56

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Signal names for 15-pin mini D-sub connecter

. . . . . 58

SCART pin assignments

. . . . . . . . . . . . . . . . . . . . . . 59

Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Chapter 1

Important user

information

In order to obtain maximum enjoyment from this Pioneer PDP-

5080XA/PDP-4280XA plasma television, please first read this

information carefully.

With the Pioneer PDP-5080XA/PDP-4280XA, you can be assured of

a high quality plasma television with long-life and high reliability. To

achieve images of exceptional quality, this Pioneer plasma

television incorporates state-of-the-art design and construction, as

well as very precise and highly advanced technology.

The Pioneer PDP-5080XA/PDP-4280XA plasma television

incorporates the latest in colour filter technology: Direct Colour

Filter. This improves the colour /picture reproduction of these

models as compared to previous models. It also eliminates the need

for a physical glass panel to be placed in front of the plasma display,

which furthers Pioneer's continued goal of reducing environmental

waste in consumer electronics, now during the manufacturing

process and in the future during the recycling process.

Over the course of its lifetime, the luminosity of the Pioneer PDP-

5080XA/PDP-4280XA plasma television will diminish very slowly,

such as with all phosphor-based screens (for example, a traditional

tube-type television). To enjoy beautiful and bright images on your

Pioneer plasma television for a long time, please carefully read and

follow the usage guidelines below:

Usage guidelines

All phosphor-based screens (including conventional tube-type

televisions) can be affected by displaying static images for a

prolonged period. Plasma televisions are no exception to this rule.

After-image and permanent effects on the screen can be avoided by

taking some basic precautions. By following the recommendations

listed below, you can ensure longer and satisfactory results from

your plasma television:

· Whenever possible, avoid frequently displaying the same image

or virtually still moving pictures (e.g. closed-captioned images

or video game images which have static portions).

· Do not display Teletext for a prolonged period of time.

· Avoid viewing the on-screen display for extended periods, from

a decoder, DVD player, VCR and all other components.

·Do not leave the same picture freeze-framed or paused

continuously over a long period of time, when using the still

picture mode from a TV, VCR, DVD player or any other component.

· Images which have both very bright areas and very dark areas side

by side should not be displayed for a prolonged period of time.

· When playing a video game, the "GAME" mode setting within

"AV Selection" is strongly recommended. However, please do

not use this mode for long periods of time.

· After playing a game or displaying any still image, it is best to

view a normal moving picture in the "WIDE" or "FULL" screen

setting for more than three times the length of the previous still

moving image.

· After using the plasma television, always switch the display to

"STANDBY" mode.

PDP-5080XA_En.book Page 5 Monday, May 14, 2007 11:33 AM