PIONEER PD-F17/KUXQ/CA - Owner's Manual Immediate Download

PD-F19

PD-F17

Operating Instructions

FILE-TYPE COMPACT DISC PLAYER

READ INSTRUCTIONS -- All the safety and operating

instructions should be read before the product is

operated.

RETAIN INSTRUCTIONS -- The safety and operating

instructions should be retained for future reference.

HEED WARNINGS -- All warnings on the product and

in the operating instructions should be adhered to.

FOLLOW INSTRUCTIONS -- All operating and use

instructions should be followed.

CLEANING -- Unplug this product from the wall outlet

before cleaning. The product should be cleaned only

with a polishing cloth or a soft dry cloth. Never clean

with furniture wax, benzine, insecticides or other

volatile liquids since they may corrode the cabinet.

ATTACHMENTS -- Do not use attachments not

recommended by the product manufacturer as they

may cause hazards.

WATER AND MOISTURE -- Do not use this product

near water -- for example, near a bathtub, wash

bowl, kitchen sink, or laundry tub; in a wet basement;

or near a swimming pool; and the like.

ACCESSORIES -- Do not place this product on an

unstable cart, stand, tripod, bracket, or table. The

product may fall, causing serious injury to a child or

adult, and serious damage to the product. Use only

with a cart, stand, tripod, bracket, or table

recommended by the manufacturer, or sold with

the product. Any mounting of the product should

follow the manufacturer's instructions, and should

use a mounting accessory recommended by the

manufacturer.

CART -- A product and cart combination should be

moved with care. Quick stops, excessive force, and

uneven surfaces may cause the product and cart

combination to overturn.

GROUNDING OR POLARIZATION

If this product is equipped with a polarized alternating

current line plug (a plug having one blade wider than

the other), it will fit into the outlet only one way. This

is a safety feature. If you are unable to insert the plug

fully into the outlet, try reversing the plug. If the plug

should still fail to fit, contact your electrician to

replace your obsolete outlet. Do not defeat the

safety purpose of the polarized plug.

If this product is equipped with a three-wire

grounding type plug, a plug having a third (grounding)

pin, it will only fit into a grounding type power outlet.

This is a safety feature. If you are unable to insert the

plug into the outlet, contact your electrician to

replace your obsolete outlet. Do not defeat the

safety purpose of the grounding type plug.

POWER-CORD PROTECTION -- Power-supply cords

should be routed so that they are not likely to be

walked on or pinched by items placed upon or

against them, paying particular attention to cords at

plugs, convenience receptacles, and the point where

they exit from the product.

OUTDOOR ANTENNA GROUNDING -- If an outside

antenna or cable system is connected to the product,

be sure the antenna or cable system is grounded so

as to provide some protection against voltage surges

and built-up static charges. Article 810 of the National

Electrical Code, ANSI/NFPA 70, provides information

with regard to proper grounding of the mast and

supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding

conductors, location of antenna-discharge unit,

connection to grounding electrodes, and

requirements for the grounding electrode. See Figure

LIGHTNING -- For added protection for this product

during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from

the wall outlet and disconnect the antenna or cable

system. This will prevent damage to the product

due to lightning and power-line surges.

POWER LINES -- An outside antenna system should

not be located in the vicinity of overhead power lines

or other electric light or power circuits, or where it

can fall into such power lines or circuits. When

installing an outside antenna system, extreme care

should be taken to keep from touching such power

lines or circuits as contact with them might be fatal.

OVERLOADING -- Do not overload wall outlets,

extension cords, or integral convenience receptacles

as this can result in a risk of fire or electric shock.

OBJECT AND LIQUID ENTRY -- Never push objects of

any kind into this product through openings as they

may touch dangerous voltage points or short-out

parts that could result in a fire or electric shock.

Never spill liquid of any kind on the product.

SERVICING -- Do not attempt to service this product

yourself as opening or removing covers may expose

you to dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.

DAMAGE REQUIRING SERVICE -- Unplug this product

from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

When the power-supply cord or plug is damaged.

If liquid has been spilled, or objects have fallen into

the product.

If the product has been exposed to rain or water.

If the product does not operate normally by following

the operating instructions. Adjust only those controls

that are covered by the operating instructions as an

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the product to its

normal operation.

If the product has been dropped or damaged in any

way.

When the product exhibits a distinct change in

performance -- this indicates a need for service.

REPLACEMENT PARTS -- When replacement parts

are required, be sure the service technician has used

replacement parts specified by the manufacturer or

have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric

shock, or other hazards.

SAFETY CHECK -- Upon completion of any service or

repairs to this product, ask the service technician to

perform safety checks to determine that the product

is in proper operating condition.

WALL OR CEILING MOUNTING -- The product should

not be mounted to a wall or ceiling.

HEAT -- The product should be situated away from heat

sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce

heat.

IMPORTANT SAFETY INSTRUCTIONS

GROUND

CLAMP

GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

ANTENNA

LEAD-IN

WIRE

NEC -- NATIONAL ELECTRICAL CODE

Fig. A

ELECTRIC

SERVICE

EQUIPMENT

POWER

SERVICE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

VENTILATION -- Slots and openings in the cabinet are

provided for ventilation and to ensure reliable

operation of the product and to protect it from

overheating, and these openings must not be

blocked or covered. The openings should never be

blocked by placing the product on a bed, sofa, rug,

or other similar surface. This product should not be

placed in a built-in installation such as a bookcase or

rack unless proper ventilation is provided or the

manufacturer's instructions have been adhered to.

POWER SOURCES -- This product should be operated

only from the type of power source indicated on the

marking label. If you are not sure of the type of

power supply to your home, consult your product

dealer or local power company.

LOCATION The appliance should be installed in a

stable location.

NONUSE PERIODS The power cord of the appliance

should be unplugged from the outlet when left un-

used for a long period of time.

Thank you for buying this Pioneer product.

Please read through these operating instructions so you

will know how to operate your model properly. After you

have finished reading the instructions, put them away in a

safe place for future reference.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT NOTICE

The serial number for this equipment is located on the rear panel.

Please write this serial number on your enclosed warranty card

and keep it in a secure area. This is for your security.

BEFORE

OPERATING

BASIC

OPERATIONS

VARIOUS

OPERATIONS

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated "dangerous voltage" within the

product's enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

IMPORTANT

CAUTION:

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

This player is for consumer use. If the player is used in a business

(for example, used for a long period at a restaurant), the player will

not be covered under warranty.

CD Video, VIDEO CD, CD graphics, DVD and CD-ROM discs can

not be played with this player.

[For Canadian model]

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT

USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,

RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES

CAN BE FULLY INSERTED TO PREVENT BLADE EXPO-

SURE.

ATTENTION: POUR PREVENIR LES CHOCS ELEC-

TRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC

UN PROLONGATEUR, UNE PRISE DE COURANT OU UNE

AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEU-

VENT ETRE INSEREES A FOND SANS EN LAISSER AU-

CUNE PARTIE A DECOUVERT.

[Pour le modèle Canadien]

CAUTION

÷ Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation

exposure.

÷ The use of optical instruments with this product will increase eye hazard.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Information to User

Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment.

[For Canadian model]

This Class B digital apparatus meets all requirements of the

Canadian InterferenceCausing Equipment Regulations.

[Pour le modèle Canadien]

Cet appareil numérique de la Classe B respecte toutes les

exigences du Règlement sur le matériel brouilleur du Canada.

CAUTION

This product satisfies FCC regulations when shielded cables and

connectors are used to connect the unit to other equipment. To

prevent electromagnetic interference with electric appliances

such as radios and televisions, use shielded cables and connec-

tors for connections.

CAUTIONS REGARDING HANDLING

Location

Install the player in a well-ventilated location where it will not be

exposed to high temperatures or humidity.

Do not install the player in a location which is exposed to direct

rays of the sun, or near stoves or radiators. Excessive heat can

adversely affect the cabinet and internal components. Installation

of the player in a damp or dusty environment may also result in a

malfunction or an accident. (Avoid installation near cookers etc.,

where the player may be exposed to oily smoke, steam or heat.)

Do not install the player on a tottered stand nor in an unstable or

inclined place.

Precautions regarding installation

÷ Placing and using the compact disc player for long periods on

heat-generating sources such as amplifiers will affect perfor-

mance. Avoid placing the player on heat-generating sources.

÷ Install this compact disc player as far as possible from tuners

and TV sets. A compact disc player installed in close proximity

to such equipment may cause noise or degradation of the pic-

ture.

÷ Such noise may be particularly noticeable when an indoor an-

tenna is used. In such cases, make use of an outdoor antenna,

or turn off power to the compact disc player.

÷ Please place this unit on a level surface.

Cleaning the player

To clean the PLAYER, wipe with a soft, dry cloth. For stubborn

dirt, wet a soft cloth with a mild detergent solution made by dilut-

ing one part detergent to 5 or 6 parts water, wring well, then wipe

off the dirt. Also use a dry cloth to wipe the surface dry. Do not

use volatile liquids such as benzene and thinner which are harmful

to the unit.

Storing discs

÷ Discs are made of the same kinds of plastic used for conven-

tional analog audio records. Be careful not to allow discs to

warp; always store discs in their cases vertically, avoiding loca-

tions with high heat or humidity, or extremely low tempera-

tures. Avoid leaving discs in cars, since the seat of a car in

direct sunlight can become unbelievably hot.

÷ Always read and abide by the precautionary notes listed on disc

labels.

CD lens cleaner

The player's pickup lens should not become dirty in normal use, but

if for some reason it should malfunction due to soiling, consult your

nearest PIONEER authorized service center. Lens cleaners for CD

players are commercially available, but special care should be exer-

cised in their use since some may cause damage to the lens.

Condensation

When this unit is brought into a warm room from previously cold

surroundings or when the room temperature rises sharply, con-

densation may form inside, and the unit may not be able to attain

its full performance. If this occurs, allow the unit to stand for about

an hour or raise the room temperature gradually.

Cleaning and handling compact discs

÷ The presence of fingerprints or smudges on the surface of the

disc will not directly affect the recorded signals, but depending

on the degree of contamination, the brightness of the light

reflected from the signal surfaces may be reduced, causing

degradation of sound quality. Always keep your discs clean by

wiping them gently with a soft cloth from the inner edge to-

ward the outer periphery.

÷ If a disc becomes very dirty, dip a soft cloth in water, and after

wringing it out well, wipe the dirt away gently, and then remove

any water drops with another soft, dry cloth.

÷ Do not use record cleaning sprays or anti-static agents on discs.

Also, never clean discs with benzene, thinner, or other volatile

solvents, since damage to the disc surface may result.

Record

cleaning

sprays

Thinner

Benzene

With this unit, use a Compact Disc carrying the mark shown

below. Do not use other disc, for this may result in malfunc-

tion or damage.

÷ When holding discs, do not touch their signal surfaces. Hold by

the edges, or by one edge and the center hole.

÷ Do not affix gummed labels or tape to the label surfaces. Also,

do not scratch or damage the label.

÷ Discs rotate at high speed inside the player. Do not use dam-

aged (cracked or warped) discs.

CAUTION RE: USE OF SHAPED CD's

This product is designed for use with conventional, fully circular CD's

only.

Use of shaped CD's is not recommended for this product.

Pioneer disclaims all liability arising in connection with the use of

shaped CD's.

Re-transporting

When re-transporting this unit in the future, remove all discs from the

rack. Turn off the STANDBY/ON switch, wait for "OFF" to go out from

the display, and unplug the power cord.

BEFORE

OPERATING

BASIC

OPERATIONS

VARIOUS

OPERATIONS

BEFORE YOU USE THE PLAYER

CONFIRM SUPPLIED ACCESSORIES

Output cable x 1

Control cable x 1

Remote control unit x 1

1¡

RANDOM

DISC

SET

TRACK

SET

PQRS

TUV

MARK

WXYZ

GHI

JKL

MNO

ABC

DEF

TIME/

CHARA

HI-LITE

BEST

MODE

CLEAR

PGM

REPEAT

FILE-TYPE CD PLAYER

REMOTE CONTROL UNIT

TITLE

DISPLAY

TITLE

INPUT

CURSOR

Size AA/R6P dry cell

batteries x 2

HERE'S WHAT YOU CAN DO!

Up to 100 CDs can be registered by classifying

them into 3 categories (CUSTOM). [page 12]

For example, if you register you own discs in CUSTOM I, your

mother's discs in CUSTOM II and your father's discs in CUSTOM

III or if you select three kinds of music genres or artists and

discs classified under one of the three CUSTOM banks. Addition

of discs to already-registered discs is also possible. Each of the

three CUSTOM banks can register up to 100 discs.

Single Loader slot is provided. [page 11]

If you have a disc borrowed from a friend, you can play only that

disc by loading it in this special slot (Disc No. 0), without replacing

discs stored in the rack.

Immediately access and play your favorite tracks

from among the 100 discs loaded in the player.

[page 16]

The Best Selection Memory function lets you store and play

favorite tracks with the touch of a single button (up to 20 tracks).

Easy access to the disc(s) you've listened to

recently. [page 16]

The Previous Disc Scan function recalls the last disc you played

and then moves one by one through the previously played discs

(auto-memory of last 20 discs played).

Disc Title input [page 18]

The titles of up to 100 discs can be input, which is very convenient

for disc management.

CD TEXT compatibility [page 20]

The disc/track titles and performer names are displayed during

playback of a CD TEXT disc.

Hi-bit Legato Link Conversion

This results in more faithful reproduction of the original sound than

ever before.

Energy-saving design

This product is designed in such a way that power consumption is

reduced when in the standby mode.

For the power consumption in the standby mode, refer to the

specifications on page 23.

BEFORE

OPERATING

BASIC

OPERATIONS

VARIOUS

OPERATIONS

CONTENTS

CAUTIONS REGARDING HANDLING ................................. 4

BEFORE YOU USE THE PLAYER ....................................... 5

CONNECTIONS .................................................................. 6

NAMES OF PARTS ............................................................. 7

HOW TO LOAD THE DISCS ............................................... 9

BASIC OPERATIONS

To listen in order from the first track ............................. 10

To select the disc and track .......................................... 10

To select a play mode ................................................... 10

Playing a disc in the Single Loader slot ......................... 11

The hood can be opened or closed during playback ..... 11

VARIOUS OPERATIONS

To program and play only the discs you want to hear ... 12

To start playback from a specific disc ........................... 13

To play a track you want to hear ................................... 13

To repeat playback ........................................................ 13

To playback tracks/discs at random .............................. 14

To program tracks/discs in a desired order ................... 15

To store your favorite tracks ......................................... 16

To find out which discs you've listened to recently ...... 16

To scan quickly through tracks on a disc ....................... 17

Disc Title Input .............................................................. 18

Disc Title Modification ................................................... 19

To use the TIME button ................................................ 21

CD TEXT Data Display

(CD TEXT compatible data only) .................................... 20

To search a disc by the Disc title .................................. 20

TROUBLESHOOTING ....................................................... 22

SPECIFICATIONS .............................................................. 23