PIONEER PDA-H05 - Owner's Manual Immediate Download

PRECAUTIONS:

· We accept no responsibility for losses resulting from the use of parts other than those supplied by us.

· We guarantee the performance of our products only when they are assembled and adjusted in

accordance with this installation manual.

· The specifications and external designs shown in this installation manual are subject to change

without notice.

CAUTION

Exclamation marks placed within triangles are intended to alert users to the presence of important

safety information. Be sure to read instructions indicated by this symbol.

This manual provides precautions and information for installation, preparation, and handling of the optical

system cable.

Before installation and preparatory work, choose a safe and appropriate site after thorough consideration

of construction, materials used, strength, and surroundings. If adequate safeguards are not in place,

immediately halt the installation process and discontinue marketing activities.

Optical System Cable (PDA-H05)

Installation Manual (Ver. 1.0)

1. Product Summary

Contents

Product Summary ..................................................... 2

Cautions During Use ................................................. 2

Specifications ............................................................ 4

Components .............................................................. 5

Drawings of External Appearance ........................... 6

Names of Parts .......................................................... 7

Installation Site Requirements ................................ 8

7-1

Temperature and humidity conditions ................ 8

7-2

Prevent condensation ........................................ 8

7-3

Repeater box anchoring method ........................ 8

7-4

Other installation conditions ............................... 8

When Passing the Cables Thorough the CD Tube ... 9

8-1

The CD (Combined Duct) tube ........................... 9

8-2

Precautions when installing a CD tube .............. 9

8-3

Passing cables through the CD tube .................. 9

8-4

Method of combining cables before the pass-

through step ..................................................... 10

Optical System Cable Connection Procedure ....... 11

9-1

Connecting the Media Receiver ....................... 11

9-2

Connecting the Plasma Display ........................ 12

9-3

Connection of Optical cable ............................. 14

9-4

Connection of AC/DC power adapter ............... 15

10. Troubleshooting ....................................................... 16

11. After-sales Service ................................................... 21

CAUTION

· To prevent injury and material damage, thoroughly read this

manual and all labels found on the equipment before

attempting to mount, install, move, or adjust the product.

· Do not install the unit outside or in the open air. Doing so

will lead to water seepage into the system, resulting in fire

or electric shock.

· Be especially careful when working around parts of the

system that have sharp edges.

· When performing installation work from a height, take

suitable precautions to guard against falling. Set up a barrier

around the work site to prevent accidentally dropped objects

from injuring persons standing or walking below.

· Keep all foreign objects out of the unit. Do not tamper with

the unit, or fire or electric shock may result.

· Observe the following operating environmental limitations:

Temperature: 0 to 40°C (32 to 104°F)

Humidity: Up to 85%

· Install the unit only in properly ventilated areas.

This product enables Display and Media Receiver to be

connected up to 30 meters longer apart.

2. Cautions During Use

Note: to draw the attention of the user to potentially

hazardous situations, various warnings and cautions,

accompanied by corresponding symbols, are indicated in

the documentation and on the product. The meanings of

these symbols are as follows:

This symbol indicates the presence

of a potential danger that could

result in serious, even fatal, injury.

This symbol indicates the presence

of a potential danger that could

result in electric shock or damage to

equipment.

WARNING

CAUTION

WARNING - CAUTION

(Be careful during operation)

TAKE HEED!

(Do not neglect to carry out

this action.)

STOP!

(This action is prohibited.)

Do not carry out this action in the case of

Plasma Hivision TVs, carry out modifications

or carry out such actions in the case of similar

products.

Do not look directly into devices which emit

laser light.

AEL Class 1 laser product per FDA/CDRH

and IEC 60825-1

CAUTION

WARNING

Handling the cord on this product or cords

associated with accessories sold with the

product will expose you to chemicals listed on

proposition 65 known to the State of California

and other governmental entities to cause cancer

and birth defect or other reproductive harm.

Wash hands after handling.

STOP

Do not install outdoors, in the vicinity of hot

springs or near the seaside.

Be careful of uninsulated "high voltage"

components within the product enclosure;

these may be of sufficient magnitude to

constitute a risk of electric shock to the

operator.

Use of controls or adjustments or performance

of procedures other than those specified

herein may result in hazardous radiation

exposure.

CAUTION

2. Cautions During Use

IMPORTANT NOTICE

The serial number for this equipment is located on the

bottom of the repeater boxes. Please write this serial

number on the enclosed warranty card and keep in a

safe place for your own security.

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

This apparatus is not waterproof. To prevent

fire or electric shock, do not expose this

apparatus to rain or moisture or bring any

water containers or vessels such as vases,

flower pots, cosmetics containers, medicine

bottles etc., into contact with or near the

apparatus.

WARNING

This product is equipped with a three-wire

grounding (earthing) type plug, that is a plug

having a third (grounding, earthing) pin. The

unit can only be plugged into a grounding

(earthing) type power outlet. This is a safety

feature. If you are unable to insert the plug into

the outlet, contact an electrician to replace the

obsolete outlet. Make sure to capitalise on this

safety feature: do not use an older power outlet

which is not grounded as described.

WARNING

BEFORE PLUGGING IN THE UNIT FOR THE

FIRST TIME, READ THE FOLLOWING

SECTION CAREFULLY.

The voltage of the available power supply

differs according to country or region. Be

sure that the power supply voltage of the

area where this unit will be used meets the

required voltage (e.g., 230V or 120V) written

on the rear panel.

IMPORTANT

FOR USE IN THE UNITED

KINGDOM

Green & Yellow : Earth

Blue

: Neutral

Brown

: Live

NOTE

Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by

qualified service personnel.

The cut-off plug shoud be disposed of and must

not be inserted into any 13 amp socket as this

can result in electric shock. The plug or adaptor or

the distribution panel shoud be provided with 13

A fuse. As the colours of the wires in the mains

lead of this appliance may not correspond with

coloured markings identifying the terminals in

your plug, proceed as follows;

The wire which is coloured green and yellow must

be connected to the terminal in the plug which is

marked with the letter E or by the earth symbol

, or coloured green or green and yellow

The wire which is coloured blue must be

connected to the terminal which is marked with

the letter N or coloured black.

The wire in this mains lead are

coloured in accordance with the

following code :

If the plug provided is unsuitable for

your socket outlets, the plug must be

cut off and a suitable plug fitted.

The wirre which is coloured brown must be

connected to the terminal which is marked

with the letter L or coloured red.

After replacing or changing a fuse, the fuse

cover in the plug must be replaced with a

fuse cover which corresponds to the colour

of the insert in the base of the plug or the

word that is embossed on the base of the

plug, and the appliance must not be used

without a fuse cover. It lost replacement fuse

covers can be obtained from your dealer.

Only 13 A fuse approved by B.S.I or A.S.T.A

to BS1362 shoud be used.

WARNING

No naked flame sources, such as lighted candle,

should be placed on the apparatus. If naked

flame sources accidentally fall down, fire spread

over the apparatus then may cause fire.

STOP

Use the attached AC adapter for this

equipment. Use of any other adapter may

cause a fire.

This product complies with the Low Voltage Directive (73/23/

EEC, amended by 93/68/EEC), EMC Directives (89/336/EEC,

amended by 92/31/EEC and 93/68/EEC).

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installa-

tion. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance

with the instructions, may interfere with radio communica-

tions. However there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause

harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

such interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the distance between the equipment and

receiver.

- Plug the equipment into an outlet on a circuit separate

from the one to which the receiver is connected.

- Consult your dealer or an experienced radio/TV technician

for further help, if necessary.

Information for Users of the equipment

Alterations to or modifications of the equipment carried out

without appropriate authorization may invalidate the user's

equipment warranty.

This Class B digital apparatus complies with Canadian

ICES-003.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION:

TO AVOID THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE THE COVER (OR BACK); NO USER

SERVICEABLE PARTS INSIDE. HAVE SERVICING

CARRIED OUT BY QUALIFIED SERVICE PERSONNEL.

The "lightning flash" with arrowhead symbol

within an equilateral triangle, is intended to alert

the user to the presence of uninsulated

"dangerous voltage" components within the

product enclosure that may be of sufficient

magnitude to constitute a risk of electric shock

to operators.

The exclamation mark within an equilateral

triangle is intended to alert the user to the

presence of important operating and maintenance

(servicing) instructions in the documentation

which accompanies the appliance.

IMPORTANT

CAUTION: WHEN POSITIONING THIS EQUIPMENT

ENSURE THAT THE MAINS PLUG AND SOCKET IS EASILY

ACCESSIBLE.

3. Specifications

Mechanical dimensions (W x L x D)

Transmitter and Receiver Boxes: 89.4(W), 97(L), 27.5(D) mm (3-17/

32(W), 3-

13/

16 (L), 1-

32(D) in.)

AC/DC Power adaptor: 60(W), 95(L), 33(D) mm (2-3/

8 (W), 3-

4 (L), 1-

16(D) in.)

Optical connector: 23(W), 36.7(L), 9.2(D) mm (29/

32(W), 1-

16(L),

8(D) in.)

Weight

Transmitter and Receiver Boxes: 490 g (1.08 lbs)

AC/DC Power adaptor: 180 g (0.40 lbs)

Power consumption: Transmitter and Receiver Boxes: 6W

Input Power (Rated Voltage and Frequency): 100-240 V AC, 50/60 Hz

Length of Cables / Weight

System cable (Connector: white): 0.75 m (2.46 ft) / (with Repeater Box)

System cable (Connector: black/silver): 0.75 m / 100 g (2.46 ft / 0.22 lbs)

Optical cable: 30 m / 550 g (98.43 ft / 1.21 lbs)

Package dimensions (W x L x D): 415(W), 315(L), 130(D) mm (16-11/

32 (W), 12-

13/

32 (L), 5-

8 (D) in.)

Package weight: 4.0 kg (8.8 lbs)

Operating environment temperature range: 0 to 40°C (32 to 104°F) (governed by installation conditions)

Operating environment humidity range: Up to 85% (condensation shall not occur)

4. Components

Optical System Cable

Optique Système Câble

System-Lichtleiterkabel

Cavo Fibra Ottica

Optische Systeem Kabel

Cable de Sistema Óptico

Repeater Boxes (Transmitter: x1, Receiver: x1)

AC/DC Power adapter: x2

Optical cable: x1

Note: Do not bend to a radius of

curvature less than 15mm.

Operating instructions : x1

System cable (Connector: Black/Silver) : x2

AC power cord: x2

Guarantee Certificate: x1