Multi-CD control High power cassette player with
FM/AM tuner
Operation Manual
KEH-P4025
English
Español
P
ortuguês
(B)
dF
ë
W
OÐ
Before You Start
About this manual 2
Precautions 2
What's what 3
Optional remote control 4
Protecting your unit from theft 5
· Removing the front panel 5
· Attaching the front panel 5
Power ON/OFF
Turning the unit on 6
Selecting a source 6
Turning the unit off 6
Tuner
Listening to the radio 7
Storing and recalling broadcast
frequencies 8
Tuning in strong signals 8
Storing the strongest broadcast
frequencies 8
Cassette Player
Playing a tape 9
Repeating play 10
Skipping blank tape sections 10
Radio intercept 10
Multi-CD Player
Playing a CD 10
50-disc multi-CD player 11
Repeating play 11
Playing tracks in a random order 12
Scanning CDs and tracks 12
Pausing CD playback 12
Audio Adjustments
Introduction of audio adjustments 13
Using balance adjustment 13
Using the equalizer 14
· Recalling equalizer curves 14
· Adjusting equalizer curves 14
Adjusting loudness 14
Front image enhancer (FIE) 15
Adjusting source levels 15
Initial Settings
Adjusting initial settings 16
Setting the time 16
Setting the FM tuning step 16
Setting the AM tuning step 17
Switching the auxiliary setting 17
Additional Information
Setting the time display on or off 17
Using the AUX source 17
· Selecting AUX as the source 17
Cassette tapes 18
Cleaning the playback head 18
Music search and repeat functions 18
Specifications 19
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to oper-
ate your model properly. After you have finished reading the instructions, put them
away in a safe place for future reference.
Contents
En
1
About this manual
This unit features a number of sophisticated
functions ensuring superior reception and oper-
ation. All the functions have been designed for
the easiest possible use, but many are not self-
explanatory. This operation manual will help you
benefit fully from this product's potential and to
maximize your listening enjoyment.
We recommend that you familiarize yourself
with the functions and their operation by read-
ing through the manual before you begin using
this unit. It is especially important that you read
and observe precautions on this page and in
other sections.
This manual explains head unit operation. You
can perform the same operations with the
remote control (CD-R30).
Precautions
· Keep this manual handy as a reference for
operating procedures and precautions.
· Always keep the volume low enough so you
can hear sounds outside of the car.
· Protect this product from moisture.
· If the battery is disconnected or discharged,
the preset memory will be erased and must be
reprogrammed.
· Should this product fail to operate properly,
contact your dealer or nearest authorized
Pioneer Service Station.
Before You Start
En
2
English
Español
Deutsch
F
rançais
Italiano
Nederlands
Before You Start
What's what
1 VOLUME button
Press to increase or decrease the volume.
2 LOCAL button (tuner)
Press to switch local function on or off.
PAUSE/SCAN
button
Press to switch pause function on or off.
Press and hold for two seconds to switch
scan function on or off.
3 BSM button (tuner)
Press and hold for two seconds to switch
BSM function on or off.
REPEAT/RANDOM
button
Press to switch repeat function on or off.
Press and hold for two seconds to switch
random function on or off.
4 OPEN button
Press to open the front panel.
5 AUDIO button
Press to select various sound quality con-
trols.
6
5//2/3 buttons
Press to do manual seek tuning, fast for-
ward, reverse and track search controls. Also
used for controlling functions.
7 LOUDNESS button
Press to switch loudness function on or off.
8 BAND button
Press to select among three FM and one AM
band and cancel the control mode of func-
tions.
9 16 (PRESET TUNING) buttons
Press for preset tuning and disc number
search when using a multi-CD player.
0 SOURCE button
This unit is switched on by selecting a
source. Press to cycle through all of the
available sources.
- EQ button
Press to select various equalizer curves.
= CLOCK button
Press to switch clock display on or off.
En
3
35
=
-
98
7
6
0
1
2
4
Before You Start
En
4
Optional remote control
The remote control CD-R30 is sold separately.
Operation is the same as when using the button
on the head unit. See the explanation of the
head unit about the operation of each button
with the exception of ATT, which is explained
below.
~ +/ button
Press to increase or decrease the volume.
! FUNCTION button
Not used.
@ CD button
Press once to select a CD.
# Cassette button
Press once to select a cassette.
$ TUNER button
Press once to select a tuner.
% ATT button
Press to quickly lower the volume level, by
about 90%. Press once more to return to the
original volume level.
English
Español
Deutsch
F
rançais
Italiano
Nederlands
5
!
$
@
#
8
%
6
~