PIONEER KEH-1033 - Owner's Manual Immediate Download

Black plate (1,1)

Operation Manual

Mode demploi

High power Cassette player with FM/MW/LW tuner

Lecteur de cassette de grande puissance avec synto-

niseur FM/MW/LW (PO-GO)

KEH-1033

KEH-1032

English

<CZR2964-A>1

Nederlands

Italiano

Français

Deutsch

Español

Black plate (2,1)

<CZR2964-A>2

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate

your model properly. After you have finished reading the instructions, put them away

in a safe place for future reference.

Before You Start

About this unit 3

About this manual 3

Precautions 3

In case of trouble 3

Protecting your unit from theft 3

Removing the front panel 3

Attaching the front panel 4

Whats What

Head unit 5

Power ON/OFF

Turning the unit on 6

Selecting a source 6

Turning the unit off 6

Tuner

Listening to the radio 7

Storing and recalling broadcast

frequencies 7

Tuning in strong signals 7

Storing the strongest broadcast

frequencies 8

Cassette Player

Playing a tape 9

Radio intercept 9

Audio Adjustments

Introduction of audio adjustments 10

Using balance adjustment 10

Using the BTB (bass treble booster) 10

Adjusting BTB 11

Adjusting loudness 11

Adjusting source levels 11

Initial Settings

Adjusting initial settings 12

Setting the clock 12

Setting the FM tuning step 12

Additional Information

Turning the clock display on or off 13

Cassette player 13

Cassette tapes 13

Cleaning the playback head 13

Specifications 14

Contents

Black plate (3,1)

<CZR2964-A>3

About this unit

This product complies with the EMC Directives

(89/336/EEC, 92/31/EEC) and CE Marking Di-

rective (93/68/EEC).

The tuner frequencies on this unit are allo-

cated for use in Europe, Asia, the Middle East,

Africa and Oceania. Use in other areas may re-

sult in improper reception.

About this manual

This unit features a number of sophisticated

functions ensuring superior reception and op-

eration. All the functions have been designed

for the easiest possible use, but many are not

self-explanatory. This operation manual will

help you benefit fully from this productspo-

tential and to maximize your listening enjoy-

ment.

We recommend that you familiarize yourself

with the functions and their operation by read-

ing through the manual before you begin

using this unit. It is especially important that

you read and observe precautions on this

page and in other sections.

Precautions

! The Pioneer CarStereo-Pass is for use only

in Germany.

! Keep this manual handy as a reference for

operating procedures and precautions.

! Always keep the volume low enough so you

can hear sounds outside of the car.

! Protect this product from moisture.

! If the battery is disconnected or dis-

charged, the preset memory will be erased

and must be reprogrammed.

In case of trouble

Should this product fail to operate properly,

contact your dealer or nearest authorized Pio-

neer Service Station.

Protecting your unit from

theft

The front panel can be detached from the

head unit and stored in the protective case

provided to discourage theft.

! Keep the front panel closed while driving.

Important

! Never use force or grip the display and the

buttons tightly when removing or attaching.

! Avoid subjecting the front panel to excessive

shocks.

! Keep the front panel out of direct sunlight and

high temperatures.

Removing the front panel

1 Press DETACH to release the front

panel.

Press DETACH and the right side of the panel

is released from the head unit.

2 Grab the front panel and remove.

Grab the right side of the front panel and pull

away to the left. The front panel will be de-

tached from the head unit.

3 Put the front panel into the protective

case provided for safe keeping.

Before You Start

English

Section

HHHHHHHHHHHHHH

Black plate (4,1)

<CZR2964-A>4

Attaching the front panel

1 Place the front panel flat against the

head unit.

2 Press the front panel into the face of

the head unit until it is firmly seated.

Before You Start

Section

HHHHHHHHHHHHHH

Black plate (5,1)

<CZR2964-A>5

Head unit

1 SOURCE button

This unit is turned on by selecting a source.

Press to cycle through all of the available

sources.

2 RI button

Press to turn radio intercept on or off.

3 CLOCK button

Press to change to the clock display.

4 TAPE EJECT button

Press to eject a tape from your cassette

player.

5 m/n buttons

Press to fast forward or rewind the tape.

6 LOCAL/BSM button

Press to turn local function on or off when

tuner is selected as a source.

Press and hold to turn BSM function on or

off when tuner is selected as a source.

7 BAND button

Press to select among three FM and MW/

LW bands and cancel the control mode of

functions.

8 BTB button

Press to select various BTB (bass treble

booster) setting.

9 AUDIO button

Press to select various sound quality con-

trols.

a DETACH button

Press to remove the front panel from the

head unit.

b 16 buttons

Press for preset tuning.

c c/d buttons

Press to do manual seek tuning. Also used

for controlling functions.

d LOUDNESS button

Press to turn loudness on or off.

e VOLUME button

Press to increase or decrease the

volume.

1 2

Whats What

English

Section

HHHHHHHHHHHHHH