ORDER NO.
PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER ELECTRONIC CORPORATION 1998
RRV2066
T-ZZW NOV. 1998 Printed in Japan
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The grille is attached to the cabinet by 4 internal screws.
To detach it, unfasten those screws.
When attaching it, fit the boss of the flange into the hole on the
cabinet.
The tweeter is attached to the grille by 2 internal screws.
To detach it, unfasten those screws.
When attaching it, face its terminal lower right.
This product is component of system.
For the operating instructions, refer to the service manual RRV2076 for HTZ-7.
SPEAKER SYSTEM
HTZ-ST7
KU/CA
2
Cabinet
SNK2305
Grille
SMG1618
NSP
Grille Cloth
SAS1437
NSP
Grille Frame
SNK2306
Speaker Wire
SDD1269
NSP
Connector (Red)
SKF1033
NSP
Connector (White)
SKF1045
NSP
Cord
ZWWAC2118-29
Packing (for Cabinet, Grille width)
SEC1398
Packing (for Cabinet, Grille length) SEC1401
Packing (for Screw)
SEE1066
NSP
Damper
SES1021
Input Terminal
SKX1056
NSP
Stamped Model Label
SME2911
NSP
Model Label
SAN2700
Acoustic Absorbent (for Grille Rib) SMV1919
NSP
Acoustic Absorbent (for Cabinet)
SMV1940
Speaker
B70AC45-57F
Screw (for Speaker)
BPZ40P060FMC
Screw (for Cabinet)
BPZ40P120FMC
NSP
Nut M4 (for Cabinet)
SBN1038
NSP
Nut M3 (for Stand)
SBN1039
Mark No.
Description
Part No.
CS Cord ASSY (SDD1269)
SCHEMATIC DIAGRAM
For Packing
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
NOTES:
PARTS LIST
Mark No.
Description
Part No.
HTZ-ST7
NSP
Accessory Kit
SEA1534
Speaker Wire (for Front, Center) SDS1065
Speaker Wire (for Rear)
SDS1066
NSP
Screw Package
SEA1530
Screw (for Stand, Cabinet) BMZ40P120FMC
Non Skid Pads (for Stand)
SEP1189
NSP
Polyethylene Bag S1
SHL1225
Cable Label
SRW1066
NSP
Polyethylene Bag S2
SHL1223
Stand
SNK2312
Top protector
SHA2134
Bottom protector
SHA2135
Packing Case
SHG2198
NSP
Polyethylene Bag S2 (for Satellite) SHL1224
NSP
Polyethylene Bag S1 (for Stand)
SHL1225
Speaker
INPUT
Red
White