PIONEER HTZ-77DV/YPWXJ - Owner's Manual Immediate Download

Setting Up the

System

Although compact, this system delivers powerful Dolby Digital and DTS

sound to turn your room into a home theater. The appearance of the

system is designed to match modern interiors. If you are using the

system for the first time, these two pages show you how to connect the

system and set up the speakers.

Check supplied accessories

Confirm that the following accessories are in the box when you open it.

Remote control unit

Dry cell batteries

(size AA/R6P) x 2

Display unit (AXX7107)

AM loop antenna

FM antenna

Control cable A

Control cable B

Display cable

Video cord

Gray /

Yellow plugs

Blue plugs /

Power cord

Speaker cords /

5 m x 3 (for center, front L-R speakers)

Printed in

<ARE7295-A>

Operating instructions

1 Connect the subwoofer unit and DVD tuner system with 2 cables

1. Plug the control cable A (blue

plugs) into the A jack (USE ONLY

WITH S-DV77SW) on the rear of

the DVD tuner system.

2. Plug the other end of the control

cable A into the A jack (TO

MODEL XV-DV77) on the rear of

the powered subwoofer unit.

In the same way, plug one end of

the control cable B (black plugs)

into the B jack (USE ONLY WITH

S-DV77) on the rear of the DVD

tuner system, and the other end

into the B jack (TO MODEL XV-

DV77) on the powered

subwoofer unit.

2 Connect the DVD tuner system and display unit

1. Plug the L-shaped end of the

display cable into the connector

on the rear of the display unit

(AXX7107).

2. Plug the other end of the display

cable into USE ONLY WITH

AXX7107 jack on the DVD tuner

system.

3 Setup the AM loop antenna

1. Bend the stand in the direction

indicated by the arrow.

2. Clip the loop onto the stand.

3. If you want to fix to a wall or

other surface, perform step 2

after first securing the stand with

screws.

4 Connect the AM and FM antennas

1. Twist off the plastic insulation on

the end of each strand of the AM

antenna.

2. Press the AM antenna terminal

lever to open it, and insert a wire.

Release the lever to secure.

3. Connect the other strand of the

AM antenna in the same way.

4. Press the FM antenna terminal

lever to open it, and insert a wire.

Release the lever to secure.

Note

· Keep antenna cables away from other cables

and the display unit and main set.

· To assure optimum reception, pull the FM

antenna so that it is fully extended and not

coiled or hanging at the rear of the unit.

· If reception with the supplied antenna is poor,

see page 83 of the main operating instructions

for details on the Connecting Outdoor

Antennas.

Non-skid pads x 19 (satellite speakers)

10 m x 2 (for rear L-R speakers)

COAX

OPT

.IN

OPT

.OUT

R CT-L1

USE ON

WITH AAX

7107

SYSTEM

AUD

IO IN

VIDEO

USE

ONL

Y WITH

S-DV77

SW OR

S-DV88SW

S-VIDEO

OUT

VIDE

OUT

USE

ONL

Y WITH

S-D

V77SW

S-D

V88SW

Black plugs /

COAX IN

OPT.IN

OPT.O

AM LO

ANTEN

UNBAL

R CT-L11

USE ONL

WITH

AAX7107

VIDEO

SYSTEM

AUDIO

NTEN

VIDEO

USE O

NLY W

ITH

S-DV77

SW OR

S-DV88

S-VIDE

OUT

VIDEO

OUT

USE O

NLY W

ITH

S-DV7

7SW

S-DV8

8SW

COAX

OPT

.IN

AM LOOP

ANTENNA

UNB

FROM

MODEL

PDR

-L77

OR CT-L11

MJ-L1

VIDEO

SYSTEM

AUDIO

ANTEN

VIDEO

S-VID

OUT

VIDE

OUT

Connecting

Caution

When connecting this system or changing connections, be

sure to switch power OFF with the STANDBY/ON button, and

disconnect the power cord from the wall socket.

After completing all connections, connect the power cord to

the wall socket.

Memo

· The display unit (AXX7107) features holes on the rear to enable

hanging on a wall, so you can install it wherever you like.

Non-slip pads

· Remove the supplied non-slip pads from the paper, and stick

three onto the base of each satellite speaker.

STANDBY/ON

COAX I

OPT.IN

OPT.O

OOP

NNA

UNB

USE

ONLY

WITH AAX7107

VIDEO

SYSTEM

AUDIO

NNA

VIDEO

USE

ONLY

WITH

S-DV77SW

S-DV88

S-VID

OUT

VIDEO

OUT

USE O

NLY W

ITH

S-DV7

7SW O

S-DV8

8SW

COAX IN

OPT.IN

AM LOOP

ANTENNA

UNBAL

VIDEO

AUDIO

ANTENNA

VIDEO

S-VIDE

OUT

VIDEO

OUT

<CENTER> under side

<FRONT, REAR> under side

Non-skid pads x 4 (subwoofer)

Fix to the underside of the subwoofer

OPT

.IN

OPT.OUT

AM LOOP

ANTENNA

UNB

FROMM

ODEL

PDR-L77

OR CT

-L11

MJ-L1

USE ONL

WITH

AAX7107

VIDEO

SYSTEM

AUDIO

ANTENNA

VIDEO

USE

ONLY

WITH

S-DV77SW

S-DV88SW

S-VIDEO

OUT

VIDEO

OUT

USE

ONLY

WITH

S-D

V77SW

S-DV88S

SURR

OUND

(REAR)

Published by Pioneer Corporation.

5 Connect the speakers

1. Twist and pull off the insulation

at both ends of the speaker cord.

2. Each speaker cord, speaker and

terminal on the main unit has a

colored marker. Match up the

terminal with the right speaker

cord and speaker. Insert the wire

while pressing the speaker

terminal tab. Insert the wire with

the colored marker into the red

side, and the other wire into the

black side.

[Satellite speakers] Release the lever.

[Powered subwoofer] Pull back the lever.

3. Repeat for all speakers and the

subwoofer unit.

Caution:

Do not use the speakers with an amp other than

this system's as it may result in damage or fire.

Note

It makes connecting the speaker cords easier if you first stick the

supplied cord labels on either end of each cord.

SURROUND

(REAR)

6 Connect the TV

1. Connect the supplied video cord

(yellow plugs) to the DVD tuner

system's VIDEO OUT jack.

2. Connect the other end of the

video cord to the TV's VIDEO IN

jack.

Note

You can also use an S-Video cord (not

supplied) to connect the S-Video jack of this

unit to an S-Video input on your TV.

VIDEO

7 Connect the power cord

1. Connect the power cord to the

powered subwoofer unit's AC

INLET.

2. Connect the power cord to a wall

socket.

Loading batteries in the remote

control

Incorrect use of batteries may cause leakage or rupture.

Always be sure to follow these guidelines:

· Always insert batteries into the battery compartment correctly

matching the positive

ª and negative · polarities, as shown

by the display inside the compartment.

· Never mix new and used batteries.

· Batteries of the same size may have different voltages, depending

on brand. Do not mix different brands of batteries.

· When disposing of used batteries,

please comply with governmental

regulations or environmental

public instruction's rules that

apply in your country or area.

The remote control can be used

within a range of about 7 meters from

the remote sensor of the display unit,

and within a 30 degree angle.

Note

· In order to prevent battery

leakage, remove the batteries

when not using the remote control

for an extended period (one

month or more). If leakage occurs, carefully wipe away any

battery fluid inside the compartment, and replace the batteries with

new ones.

· Do not allow books or other objects to rest on top of the remote

control, since the buttons may be depressed, causing faster

exhaustion of the batteries.

Precautions:

· The remote control may not work if there is an obstacle between

the remote control and the display unit, or if the remote control is

not directed towards the remote sensor of the display unit at the

correct angle.

· The remote control may not work properly if strong light such as

direct sunlight or fluorescent light is shining onto the display

unit's remote sensor.

· The remote control may not work properly when this unit is used

near devices emitting infrared rays, or when remote controls of

other devices which use infrared rays are used.

On the other hand, the use of this remote control may cause other

devices to work improperly.

· When the operating range of this remote control becomes too

short, replace the batteries.

Speakers placement

Place speakers as shown below to achieve the optimum

surround sound effect.

Note

· Install the main front left and right speakers at an equal distance

from the TV.

· For optimum effect, install the rear speakers slightly above ear

level.

· This system's speakers are magnetically shielded (EIAJ), so there's

virtually no picture color distortion when they are placed near a

TV. In the rare event that there is some picture color interference,

switch power to the TV off, and wait 15 to 30 minutes before

switching on again.

· Install the center speaker above or below the TV so that the sound

of the center channel is localized at the TV screen.

· When installing the center speaker on top of the TV, be sure to

secure it with tape or some other suitable means. Otherwise, the

speaker may fall from the TV due to external shocks such as

earthquakes, endangering those nearby or damaging the speaker.

COAX

OPT.IN

OPT.O

AM LO

ANTEN

UNBAL

FROMM

ODEL

PDR-L

77 OR C

T-L11

MJ-L1

USE ONL

WITH

AAX7107

VIDEO

SYSTEM

AUDIO

ANTEN

VIDEO

USE O

NLY W

ITH

S-DV77

SW OR

S-DV88

S-VIDE

OUT

VIDEO

OUT

USE O

NLY W

ITH

S-DV7

7SW O

S-DV8

8SW

SURR

OUND

(REAR)

Front L

Front R

Surround (Rear L)

Surround (Rear R)

Red

Grey

Blue

Green

Center

10m

White

VIDEO OUT

VIDEO IN

INLET

30°

Switching the demo mode on/off

This system features a demonstration display. When the demo

mode is on, the demo display automatically starts after the system

is plugged in, or if it's inactive for more than five minutes in the

DVD/CD function.

Switch the system into standby.

Press SYSTEM MENU and select DEMO

MODE.

Change menu options using the

2 and 3 buttons. Press

ENTER

to select the currently displayed option.

3Use the

5 or button to select DEMO ON

or DEMO OFF as required. Press ENTER.

The system returns to standby.

SYSTEM MENU

DEMO MODE

2 3

ENTER

DEMO ON

DEMO OFF

ENTER

Dry cell batteries (size AA/

R6P) x 2

Center speaker

Front speakers

Surround speakers (Rear )

Subwoofer

Line Voltage Selector Switch

( Multi voltage model only)

There is a Voltage Selector. Be sure this is set

correctly.

Always check that this selector is set

properly before plugging the power cord

into the wall outlet.

1. Disconnect the power cord.

2. Use a small-sized screwdriver (flat

blade).

3. Insert the screwdriver into the

groove on the voltage selector,

and adjust the voltage selector.

VOLTAGE SELECTOR

110 V

-120 V

220 V

-230 V

240 V