background image
Operation Manual
Mode d
'emploi
CD RDS RECEIVER
AUTORADIO CD RDS
CD RDS
DEH-1020E
DEH-1000E
English
Nederlands
Italiano
Français
Deutsch
Español


background image
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate
your model properly. After you have finished reading the instructions, keep this man-
ual in a safe place for future reference.
Before You Start
About this unit
3
Visit our website
3
Protecting your unit from theft
3
­ Removing the front panel 4
­ Attaching the front panel 4
Operating this unit
What
's What 5
­ Head unit 5
­ LCD display 5
Basic Operations
6
­ Turning the unit on and selecting a
source
6
­ Adjusting the volume 6
­ Turning the unit off 6
Tuner
6
­ Listening to the radio 6
­ Storing and recalling broadcast
frequencies
7
­ Tuning in strong signals 7
­ Storing the strongest broadcast
frequencies
7
­ Switching the RDS display 7
­ Receiving PTY alarm broadcasts 8
­ Selecting alternative frequencies 8
­ Receiving traffic announcements 9
Built-in Player
9
­ Playing a disc 9
­ Repeating play 9
­ Playing tracks in random order 9
­ Scanning tracks of a CD 10
­ Pausing disc playback 10
Audio Adjustments
10
­ Using balance adjustment 10
­ Using the equalizer 10
­ Adjusting equalizer curves 10
­ Adjusting loudness 10
­ Adjusting source levels 11
Other Functions
11
­ Adjusting initial settings 11
­ Setting the FM tuning step 11
­ Switching Auto PI Seek 11
­ Switching the auxiliary setting 11
­ Saving the battery consumption 11
­ Sound muting 12
Additional Information
Error messages
13
Handling guideline of discs and player
13
Dual Discs
13
Specifications
15
Contents
En
2


background image
If you want to dispose this product, do not mix
it with general household waste. There is a se-
parate collection system for used electronic
products in accordance with legislation that re-
quires proper treatment, recovery and recy-
cling.
Private households in the member states of the
EU, in Switzerland and Norway may return their
used electronic products free of charge to desig-
nated collection facilities or to a retailer (if you
purchase a similar new one).
For countries not mentioned above, please con-
tact your local authorities for the correct method
of disposal.
By doing so you will ensure that your disposed
product undergoes the necessary treatment, re-
covery and recycling and thus prevent potential
negative effects on the environment and human
health.
About this unit
The tuner frequencies on this unit are allo-
cated for use in Western Europe, Asia, the
Middle East, Africa and Oceania. Use in other
areas may result in poor reception. The RDS
(radio data system) function operates only in
areas with FM stations broadcasting RDS sig-
nals.
CAUTION
! Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, damage to this unit, smoke, and over-
heating could result from contact with liquids.
! "CLASS 1 LASER PRODUCT"
This product contains a laser diode of higher
class than 1. To ensure continued safety, do
not remove any covers or attempt to gain ac-
cess to the inside of the product. Refer all ser-
vicing to qualified personnel.
! The Pioneer CarStereo-Pass is for use only in
Germany.
! Keep this manual handy as a reference for op-
erating procedures and precautions.
! Always keep the volume low enough so that
you can hear sounds from outside the vehicle.
! Protect this unit from moisture.
! If the battery is disconnected or discharged,
the preset memory will be erased and must be
reprogrammed.
! Should this product fail to operate properly,
contact your dealer or nearest authorized
Pioneer Service Station.
Visit our website
Visit us at the following site:
http://www.pioneer.co.uk
! Register your product. We will keep the de-
tails of your purchase on file to help you
refer to this information in the event of an
insurance claim such as loss or theft.
! We offer the latest information about
Pioneer Corporation on our website.
Protecting your unit from
theft
The front panel can be detached to deter theft.
Important
! Handle gently when removing or attaching
the front panel.
! Avoid subjecting the front panel to excessive
shocks.
! Keep the front panel out of direct sunlight and
high temperatures.
Before You Start
En
3
English
Section
01


background image
Removing the front panel
1
Press DETACH to release the front
panel.
2
Grab the front panel and remove.
3
Put the front panel into provided pro-
tective case for safe keeping.
Attaching the front panel
1
Slide the front panel to the left until it
clicks.
Front panel and the head unit are jointed on
the left side. Make sure that the front panel
has been jointed to the head unit.
2
Press the right side of the front panel
until it is firmly seated.
# If you can't attach the front panel to the head
unit successfully, try again. Front panel may be
damaged if you attach the front panel forcedly.
Before You Start
En
4
Section
01


background image
What
's What
Head unit
12
5
6
d c
a
4
9
8 7
3
b
1 TA button
Press to turn TA function on or off. Press
and hold to turn AF function on or off.
2 FUNCTION button
Press to recall the function menu when op-
erating a source.
3 a/b/c/d buttons
Press to perform manual seek tuning, fast
forward, reverse and track search controls.
Also used for controlling functions.
4 AUDIO button
Press to select various sound quality con-
trols.
5 CD loading slot
Insert a disc to play.
6 EJECT button
Press to eject a CD from your built-in CD
player.
7 AUX input jack (3.5 mm stereo jack)
Use to connect an auxiliary equipment.
8 DETACH button
Press to remove the front panel from the
head unit.
9 1 to 6 buttons
Press for preset tuning.
a EQ button
Press to select various equalizer curves.
Press and hold to turn loudness on or off.
b SOURCE button, VOLUME
This unit is turned on by selecting a source.
Press to cycle through all the available
sources.
Press and hold to recall the initial setting
menu when the sources are off.
Rotate it to increase or decrease the vo-
lume.
c BAND button
Press to select among MW/LW and two FM
bands and cancel the control mode of func-
tions.
d DISPLAY button
Press to select different displays.
LCD display
3
2
1
5
4
6 7
8 9
1 Main display section
Shows the various information such as
band, play time, and other setting.
! Tuner
Band and frequency are displayed.
! RDS
Program service name, PTY information
or frequency is displayed.
! Built-in CD Player
Elapsed play time is displayed.
! Audio and initial setup
Function names and setup status are dis-
played.
2 Preset number/track number indicator
Shows the track number or preset number.
3 AF indicator
Shows when AF (alternative frequencies
search) function is on.
Operating this unit
En
5
English
Section
02