PIONEER CT-W208R/HVXJ - Owner's Manual Immediate Download

Operating Instructions

STEREO DOUBLE CASSETTE DECK

CT-W208R

Thank you for buying this Pioneer product.

Please read through these operating instructions so you

will know how to operate your unit properly. After you

have finished reading the instructions, keep them in a

safe place for future reference.

In some countries or regions, the shape of the power

plug and power outlet may sometimes differ from that

shown in the explanatory drawings. However, the

method of connecting and operating the unit is the

same.

WARNING:TO PREVENT FIRE OR SHOCK HAZ-

ARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

This product complies with the Low Voltage

Directive (73/23/EEC), EMC Directives (89/336/EEC,

92/31/EEC) and CE Marking Directive (93/68/EEC).

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

IMPORTANT

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to alert

the user to the presence of uninsulated "dan-

gerous voltage" within the product's enclosure

that may be of sufficient magnitude to consti-

tute a risk of electric shock to persons.

CAUTION:

TO PREVENT THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS IN-

SIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Information to User

Alteration or modifications carried out without appropriate authorization may invalidate the user's right to

operate the equipment.

IMPORTANT

FOR USE IN THE UNITED

KINGDOM

The wires in this mains lead are coloured in

accordance with the following code :

Blue

: Neutral

Brown

: Live

If the plug provided is unsuitable for your socket

outlets, the plug must be cut off and a suitable

plug fitted.

Do not connect either wire to the earth terminal

of a three pin plug.

NOTE

After replacing or changing a fuse, the fuse cover

in the plug must be replaced with a fuse cover

which corresponds to the colour of the insert in

the base of the plug or the word that is em-

bossed on the base of the plug, and the appli-

ance must not be used without a fuse cover. If

lost replacement fuse covers can be obtained

from: your dealer.

Only 5 A fuses approved by B.S.I. or A.S.T.A to

B.S. 1362 should be used.

The cut-off plug should be disposed of and must

not be inserted into any 13 amp socket as this can

result in electric shock. The plug or adaptor or the

distribution panel should be provided with 5 amp

fuse. As the colours of the wires in the mains lead

of this appliance may not correspond with coloured

markings identifying the terminals in your plug, pro-

ceed as follows :

The wire which is coloured blue must be con-

nected to the terminal which is marked with the

letter N or coloured black.

The wire which is coloured brown must be con-

nected

to the terminal which is marked with the letter L or

coloured red.

IMPORTANT NOTICE

[For U.S. model]

The serial number for this equipment is located on

the rear panel. Please write this serial number on

your enclosed warranty card and keep it in a secure

area. This is for your security.

READ INSTRUCTIONS -- All the safety and

operating instructions should be read before

the product is operated.

RETAIN INSTRUCTIONS -- The safety and

operating instructions should be retained for

future reference.

HEED WARNINGS -- All warnings on the product

and in the operating instructions should be

adhered to.

FOLLOW INSTRUCTIONS -- All operating and use

instructions should be followed.

CLEANING -- Unplug this product from the wall

outlet before cleaning. The product should be

cleaned only with a polishing cloth or a soft dry

cloth. Never clean with furniture wax, benzine,

insecticides or other volatile liquids since they

may corrode the cabinet.

ATTACHMENTS -- Do not use attachments not

recommended by the product manufacturer as

they may cause hazards.

WATER AND MOISTURE -- Do not use this product

near water -- for example, near a bathtub,

wash bowl, kitchen sink, or laundry tub; in a wet

basement; or near a swimming pool; and the

like.

ACCESSORIES -- Do not place this product on an

unstable cart, stand, tripod, bracket, or table.

The product may fall, causing serious injury to

a child or adult, and serious damage to the

product. Use only with a cart, stand, tripod,

bracket, or table recommended by the

manufacturer, or sold with the product. Any

mounting of the product should follow the

manufacturer's instructions, and should use a

mounting accessory recommended by the

manufacturer.

CART -- A product and cart combination should be

moved with care. Quick stops, excessive force,

and uneven surfaces may cause the product

GROUNDING OR POLARIZATION

If this product is equipped with a polarized

alternating current line plug (a plug having one

blade wider than the other), it will fit into the

outlet only one way. This is a safety feature. If

you are unable to insert the plug fully into the

outlet, try reversing the plug. If the plug should

still fail to fit, contact your electrician to replace

your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

If this product is equipped with a three-wire

grounding type plug, a plug having a third

(grounding) pin, it will only fit into a grounding

type power outlet. This is a safety feature. If you

are unable to insert the plug into the outlet,

contact your electrician to replace your obsolete

outlet. Do not defeat the safety purpose of the

grounding type plug.

POWER-CORD PROTECTION -- Power-supply

cords should be routed so that they are not

likely to be walked on or pinched by items

placed upon or against them, paying particular

attention to cords at plugs, convenience

receptacles, and the point where they exit from

the product.

OUTDOOR ANTENNA GROUNDING -- If an

outside antenna or cable system is connected

to the product, be sure the antenna or cable

system is grounded so as to provide some

protection against voltage surges and built-up

static charges. Article 810 of the National

Electrical Code, ANSI/NFPA 70, provides

information with regard to proper grounding of

the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge unit,

size of grounding conductors, location of

antenna-discharge unit, connection to grounding

electrodes, and requirements for the grounding

electrode. See Figure A.

LIGHTNING -- For added protection for this product

during a lightning storm, or when it is left

unattended and unused for long periods of

time, unplug it from the wall outlet and

disconnect the antenna or cable system. This

will prevent damage to the product due to

lightning and power-line surges.

POWER LINES -- An outside antenna system should

not be located in the vicinity of overhead power

lines or other electric light or power circuits, or

where it can fall into such power lines or circuits.

When installing an outside antenna system,

extreme care should be taken to keep from

touching such power lines or circuits as contact

with them might be fatal.

OVERLOADING -- Do not overload wall outlets,

extension cords, or integral convenience

receptacles as this can result in a risk of fire or

electric shock.

OBJECT AND LIQUID ENTRY -- Never push objects

of any kind into this product through openings

as they may touch dangerous voltage points or

short-out parts that could result in a fire or

electric shock. Never spill liquid of any kind on

the product.

SERVICING -- Do not attempt to service this product

yourself as opening or removing covers may

expose you to dangerous voltage or other

hazards. Refer all servicing to qualified service

personnel.

DAMAGE REQUIRING SERVICE -- Unplug this

product from the wall outlet and refer servicing

to qualified service personnel under the

following conditions:

When the power-supply cord or plug is damaged.

If liquid has been spilled, or objects have fallen

into the product.

If the product has been exposed to rain or

water.

If the product does not operate normally by

following the operating instructions. Adjust only

those controls that are covered by the operating

instructions as an improper adjustment of other

controls may result in damage and will often

require extensive work by a qualified technician

to restore the product to its normal operation.

If the product has been dropped or damaged in

any way.

When the product exhibits a distinct change in

performance -- this indicates a need for service.

REPLACEMENT PARTS -- When replacement parts

are required, be sure the service technician has

used replacement parts specified by the

manufacturer or have the same characteristics

as the original part. Unauthorized substitutions

may result in fire, electric shock, or other hazards.

SAFETY CHECK -- Upon completion of any service

or repairs to this product, ask the service

technician to perform safety checks to

determine that the product is in proper operating

condition.

WALL OR CEILING MOUNTING -- The product

should not be mounted to a wall or ceiling.

HEAT -- The product should be situated away from

heat sources such as radiators, heat registers,

stoves, or other products (including amplifiers)

that produce heat.

and cart combination to overturn.

VENTILATION -- Slots and openings in the cabinet

are provided for ventilation and to ensure reliable

operation of the product and to protect it from

overheating, and these openings must not be

blocked or covered. The openings should never

be blocked by placing the product on a bed,

sofa, rug, or other similar surface. This product

should not be placed in a built-in installation

such as a bookcase or rack unless proper

ventilation is provided or the manufacturer's

instructions have been adhered to.

POWER SOURCES -- This product should be

operated only from the type of power source

indicated on the marking label. If you are not

sure of the type of power supply to your home,

consult your product dealer or local power

company.

LOCATION The appliance should be installed in a

stable location.

NONUSE PERIODS The power cord of the

appliance should be unplugged from the outlet

when left un-used for a long period of time.

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

ELECTRIC

SERVICE

EQUIPMENT

NEC -- NATIONAL ELECTRICAL CODE

Fig. A

GROUND

CLAMP

IMPORTANT SAFETY INSTRUCTIONS

CONDENSATION

When the unit is brought into a warm room from previously cold conditions or when the room temperature is

suddenly increased, condensation may form inside and the unit may not be able to attain its full performance.

To prevent this, allow the unit to stand for about an hour or raise the room temperature gradually.

INSTALLATION ........................................................ 4

MAINTENANCE ....................................................... 5

HANDLING CASSETTE TAPES ............................... 6

CONNECTIONS ....................................................... 7

FRONT PANEL FACILITIES ..................................... 8

PLAYBACK ............................................................. 11

SINGLE PLAYBACK ......................................... 11

BLANK SKIP ..................................................... 11

RELAY PLAYBACK .......................................... 12

MUSIC SEARCH .............................................. 13

RECORDING ........................................................... 14

RECORDING ..................................................... 14

RECORDING MUTE ......................................... 14

ERASING A TAPE ............................................ 14

TAPE COPYING ..................................................... 15

TROUBLESHOOTlNG ............................................ 16

SPECIFICATIONS ..................................... Back cover

CONTENTS

INSTALLATION

When installing the deck, avoid locations with high

temperatures or humidity, and make sure that

the deck receives adequate ventilation.

7 Do not install the deck in locations subject to di-

rect sunlight, or near a space heater or other heat-

ing device, as this may cause damage to the fin-

ish or internal parts.

7 Malfunctions may also result if the deck is in-

stalled in an excessively humid or dusty location.

Avoid installing the deck next to kitchen counters

or other locations subject to oily smoke or humid-

ity.

7 If the deck is placed directly on top of an amplifier,

it may pick up humming or other noise. Also, if

the amplifier generates a large amount of heat,

the deck may malfunction.

7 If the deck is located near a television set, it may

pick up inter ference noise, which will be recorded

as a whistling sound on the tape. If this happens,

move the deck further away from the television

set or turn the television set off when operating

the deck.

7 Do not place a cloth over the deck, or block the

ventilation slots in any way. The ventilation slots

on this deck are necessary to keep internal parts

cool. If they are blocked, the deck may malfunc-

tion.

Selecting fine audio equipment such as the unit you've just

purchased is only the start of your musical enjoyment. Now it's time

to consider how you can maximize the fun and excitement your

equipment offers. This manufacturer and the Electronic Industries

Association's Consumer Electronics Group want you to get the

most out of your equipment by playing it at a safe level. One that

lets the sound come through loud and clear without annoying

blaring or distortion--and, most importantly, without affecting your

sensitive hearing.

Sound can be deceiving. Over time your hearing "comfort level"

adapts to higher volumes of sound. So what sounds "normal" can

actually be loud and harmful to your hearing. Guard against this by

setting your equipment at a safe level BEFORE your hearing adapts.

To establish a safe level:

÷ Start your volume control at a low setting.

÷ Slowly increase the sound until you can hear it

comfortably and clearly, and without distortion.

Once you have established a comfortable sound level:

÷ Set the dial and leave it there.

Taking a minute to do this now will help to prevent hearing damage

or loss in the future. After all, we want you listening for a lifetime.

Want You

LISTENING

For A Lifetime

We Want You Listening For A Lifetime

Used wisely, your new sound equipment will provide a

lifetime of fun and enjoyment. Since hearing damage from loud

noise is often undetectable until it is too late, this manufacturer

and the Electronic Industries Association's Consumer Electronics

Group recommend you avoid prolonged exposure to excessive

noise. This list of sound levels is included for your protection.

Decibel

Level

Example

Quiet library, soft whispers

Living room, refrigerator, bedroom away from traffic

Light traffic, normal conversation, quiet office

Air conditioner at 20 feet, sewing machine

Vacuum cleaner, hair dryer, noisy restaurant

Average city traffic, garbage disposals, alarm clock

at two feet.

THE FOLLOWING NOISES CAN BE DANGEROUS

UNDER CONSTANT EXPOSURE

Subway, motorcycle, truck traffic, lawn mower

100

Garbage truck, chain saw, pneumatic drill

120

Rock band concert in front of speakers, thunderclap

140

Gunshot blast, jet plane

180

Rocket launching pad

Information courtesy of the Deafness Research Foundation.

Want You

LISTENING

For A Lifetime

EST 1924

EIA

N I

I ND

S O

C I A T

I O

EST 1924

EIA

N I

I ND

S O

C I A T

I O

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord

when your hands are wet a this could cause a short circuit or electric shock. Do not place the unit, a piece of furni-

ture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power

cords should be routed in such a way that they are not likely to be stepped on. A damaged power cord can cause

a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your

nearest PIONEER authrized service center or your dealer for a replacement.

CLEANING THE HEADS, PINCH

ROLLERS AND CAPSTANS

The heads, pinch rollers and capstans are likely to

get dirty quite easily. If these parts, particularly the

heads, get dirty, the high frequency components of

a recording will not be reproduced and the stereo

balance will be impaired, resulting in a deterioration

of the playback sound. It is therefore recommended

that the head section be cleaned regularly.

1. Set the POWER switch to OFF.

2. Press the eject button to open the cassette door.

3. Dip a cleaning swab in cleaning fluid and use it to

wipe the heads, capstans and pinch rollers.

NOTE:

After cleaning the head section, do not load a tape until

the cleaning fluid has dried completely (about two or

three minutes).

MAINTENANCE

Capstan

CLEANING THE FRONT PANEL

Clean the deck regularly with a soft cloth. If the front

panel becomes soiled, moisten a soft cloth with a

weak solution of neutral detergent (diluted in five to

six parts water), wring the cloth well, and wipe the

panel clean. Never use volatile cleaners like thinners,

benzine or alcohol because they will damage the

panel finish.

DEMAGNETIZING THE HEADS

After using the cassette deck for a period of time, the

heads will become magnetized. The same effect will

occur if a magnetized screwdriver, magnet or other

magnetized object is brought too

close to the

heads. When the heads become magnetized, high-

frequency sounds will be lost during recording or

playback, and interference noise may also occur. The

heads should be regularly demagnetized with a head

demagnetizer, which can be purchased at most

audio stores.

When demagnetizing the heads, make sure that the

POWER switch of the cassette deck is set to ON.

However, be sure to turn down the amplifier's

volume control to its lower position, and disconnect

any headphones from their headphones jack. For

detailed instructions, refer to the operating

instructions of the head demagnetizer.

Erase head

Pinch roller

Capstan

Pinch roller

Rec/play head