PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O.Box 1760, Long Beach, CA 90801-1760 U.S.A.
PIONEER EUROPE NV
Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE.LTD. 253 Alexandra Road, #04-01, Singapore 159936
C PIONEER CORPORATION 2001
K-ZZS. DEC. 2001 Printed in Japan
ORDER NO.
CRT2824
Service
Manual
6 DISC IN-DASH CD CHANGER
CDX-MG6056ZH
UC
- This service manual should be used together with the manual(s) listed below.
For the parts numbers, adjustments, etc. which are not shown in this manual,
refer to the following manual(s).
Model No.
Order No.
Mech. Module Remarks
CDX-MG6346ZH/ES
CRT2407
CX-890
CRT2376
G1
CD Mech. Module:Circuit Description, Mech.Description, Disassembly
EXPLODED VIEWS AND PARTS LIST
PACKING(Page 3)
- PACKING SECTION PARTS LIST
Part No.
Mark No. Symbol and Description
CDX-MG6346ZH/ES
CDX-MG6056ZH/UC
5 Owner's Manual
CRB1744
CRB1627
(English)
11 Carton
CHG4457
CHG4212
12 Contain Box
CHL4457
CHL4212
Protector
CHP2435
Not used
EXTERIOR(Page 4)
- EXTERIOR SECTION PARTS LIST
Part No.
Mark No. Symbol and Description
CDX-MG6346ZH/ES
CDX-MG6056ZH/UC
4 Chassis Unit
CXB7455
CXB7456
8 Bracket
CNC8026
CNC8816
18 Cord
CDE6148
CDE6498
27 Door
CAT2309
CAT2250
41 Grille Unit
CXB8378
CXB7487
VEHICLE
DESTINATION
PRODUCED AFTER
HONDA PART No.
PIONEER MODEL No.
Gold Wing
U.S.A., CANADA
November 2000
08A06-MCA-B00
CDX-MG6056ZH/UC
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE INC.
P.O.Box 1760, Long Beach, CA 90801-1760 U.S.A.
PIONEER ELECTRONIC [EUROPE] N.V.
Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE.LTD. 253 Alexandra Road, #04-01, Singapore 159936
C PIONEER CORPORATION 1999
K-ZZB. OCT. 1999 Printed in Japan
ORDER NO.
CRT2407
6 DISC IN-DASH CD CHANGER
6 DISC IN-DASH CD CHANGER
CDX-MG6346ZH
ES
Service
Manual
HONDA
CONTENTS
1. SAFETY INFORMATION ............................................2
2. EXPLODED VIEWS AND PARTS LIST .......................3
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM ...10
4. PCB CONNECTION DIAGRAM ................................26
5. ELECTRICAL PARTS LIST ........................................42
6. ADJUSTMENT..........................................................46
7. GENERAL INFORMATION .......................................48
7.1 DIAGNOSIS ........................................................48
7.1.1 TEST MODE ..............................................48
7.1.2 DISASSEMBLY .........................................52
7.1.3 CONNECTOR FUNCTION DESCRIPTION .......56
7.2 IC ........................................................................57
8. OPERATIONS AND SPECIFICATIONS.....................61
VEHICLE
DESTINATION
PRODUCED AFTER
HONDA PART No.
ID No.
PIONEER MODEL No.
Not specified
THAILAND, AUSTRALIA
October 1999
08A06-3B5-300
CDX-MG6346ZH/ES
Not specified
THAILAND, AUSTRALIA
October 1999
08A06-3B5-310
CDX-MG6446ZH/ES
- This service manual should be used together with the following manual(s):
Model No.
Order No.
Mech. Module
Remarks
CX-890
CRT2376
G1
CD Mechanism Module:Circuit Description, Mechanism Operation, Disassembly
CDX-MG6446ZH ES
CDX-MG6346ZH/ES
2
CDX-MG6346ZH,MG6446ZH
- CD Player Service Precautions
1. For pickup unit(CXX1311) handling, please refer
to"Disassembly"(see page 52).
During replacement, handling precautions shall be
taken to prevent an electrostatic discharge(protection
by a short pin).
2. During disassembly, be sure to turn the power off
since an internal IC might be destroyed when a con-
nector is plugged or unplugged.
3. Please checking the grating after changing the ser-
vice pickup unit(see page 46).
- When the Repair is Complete
When the repair is complete, make the CD mechanism
ready for transportation implementing the following
procedures:
1. Press the changer side 1 and 4 simultaneously to turn
the ACC on.
2. As the ACC is turned on, the disc indicator blinks in
red.
3. When the blinking is stopped, the mechanism is
ready for the transportation.
4. Attach the Transportation Bracket (CNC7878). Now
you can transport it.(See the figure below)
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair
complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
If you are not qualified to perform the repair of this product properly and safely; you should not risk trying to do so
and refer the repair to a qualified service technician.
1. SAFETY INFORMATION
Transportation Bracket
(CNC7878)
Case
(CNB2354)
CDX-MG6346ZH,MG6446ZH
1 Screw Assy
CEA2537
*
2 Polyethylene Bag
CEG-127
3 Screw
HMF40P060FZK
4 Screw
HMF50P080FMC
5 Owner's Manual(English) CRB1561
6 Polyethylene Bag
CEG1116
*
7 Sheet
CHW1402
8 Protector
CHP2123
*
9 Polyethylene Bag
E36-609
10 Protector
CHP2124
11 Carton(CDX-MG6346ZH/ES) CHG3909
Carton(CDX-MG6446ZH/ES) CHG3991
12 Contain Box(CDX-MG6346ZH/ES) CHL3909
Contain Box(CDX-MG6446ZH/ES) CHL3991
*
13 Band
CNF-512
Mark No. Description
Part No.
Mark No. Description
Part No.
- PACKING SECTION PARTS LIST
NOTE:
- Parts marked by "*" are generally unavailable because they are not in our Master Spare Parts List.
- Screws adjacent to
mark on the product are used for disassembly.
2. EXPLODED VIEWS AND PARTS LIST
2.1 PACKING
3
4
CDX-MG6346ZH,MG6446ZH
2.2 EXTERIOR