Operating Instructions
COMPACT DISC PLAYER
CDJ-200
2
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT
D3-4-2-1-1_En-A
READ INSTRUCTIONS -- All the safety and
operating instructions should be read before the
product is operated.
RETAIN INSTRUCTIONS -- The safety and
operating instructions should be retained for
future reference.
HEED WARNINGS -- All warnings on the product
and in the operating instructions should be
adhered to.
FOLLOW INSTRUCTIONS -- All operating and use
instructions should be followed.
CLEANING -- The product should be cleaned only
with a polishing cloth or a soft dry cloth. Never
clean with furniture wax, benzine, insecticides
or other volatile liquids since they may corrode
the cabinet.
ATTACHMENTS -- Do not use attachments not
recommended by the product manufacturer as
they may cause hazards.
WATER AND MOISTURE -- Do not use this
product near water -- for example, near a
bathtub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming
pool; and the like.
ACCESSORIES -- Do not place this product on an
unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a
child or adult, and serious damage to the
product. Use only with a cart, stand, tripod,
bracket, or table recommended by the
manufacturer, or sold with the product. Any
mounting of the product should follow the
manufacturer's instructions, and should use a
mounting accessory recommended by the
manufacturer.
CART -- A product and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the product
and cart combination to overturn.
VENTILATION -- Slots and openings in the cabinet
are provided for ventilation and to ensure
reliable operation of the product and to protect
it from overheating, and these openings must
not be blocked or covered. The openings should
never be blocked by placing the product on a
bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided or the
manufacturer's instructions have been adhered
to.
POWER SOURCES -- This product should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your product dealer or local power
company.
LOCATION The appliance should be installed in a
stable location.
NONUSE PERIODS The power cord of the
appliance should be unplugged from the outlet
when left un-used for a long period of time.
GROUNDING OR POLARIZATION
· If this product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other), it will fit into the
outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
· If this product is equipped with a three-wire
grounding type plug, a plug having a third
(grounding) pin, it will only fit into a grounding
type power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
grounding type plug.
POWER-CORD PROTECTION -- Power-supply
cords should be routed so that they are not likely
to be walked on or pinched by items placed
upon or against them, paying particular
attention to cords at plugs, convenience
receptacles, and the point where they exit from
the product.
OUTDOOR ANTENNA GROUNDING -- If an
outside antenna or cable system is connected to
the product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and built-up
static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of
the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of
antenna-discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode. See Figure A.
LIGHTNING -- For added protection for this
product during a lightning storm, or when it is
left unattended and unused for long periods of
time, unplug it from the wall outlet and
disconnect the antenna or cable system. This
will prevent damage to the product due to
lightning and power-line surges.
POWER LINES -- An outside antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power
circuits, or where it can fall into such power
lines or circuits. When installing an outside
antenna system, extreme care should be taken
to keep from touching such power lines or
circuits as contact with them might be fatal.
OVERLOADING -- Do not overload wall outlets,
extension cords, or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
OBJECT AND LIQUID ENTRY -- Never push
objects of any kind into this product through
openings as they may touch dangerous voltage
points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any
kind on the product.
SERVICING -- Do not attempt to service this
product yourself as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
DAMAGE REQUIRING SERVICE -- Unplug this
product from the wall outlet and refer servicing
to qualified service personnel under the
following conditions:
· When the power-supply cord or plug is
damaged.
· If liquid has been spilled, or objects have fallen
into the product.
· If the product has been exposed to rain or water.
· If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation.
· If the product has been dropped or damaged in
any way.
· When the product exhibits a distinct change in
performance -- this indicates a need for service.
REPLACEMENT PARTS -- When replacement parts
are required, be sure the service technician has
used replacement parts specified by the
manufacturer or have the same characteristics
as the original part. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
SAFETY CHECK -- Upon completion of any service
or repairs to this product, ask the service
technician to perform safety checks to
determine that the product is in proper
operating condition.
WALL OR CEILING MOUNTING -- The product
should not be mounted to a wall or ceiling.
HEAT -- The product should be situated away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers)
that produce heat.
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC -- NATIONAL ELECTRICAL CODE
Fig. A
D1-4-2-2_En
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
D8-10-1-2_En
WARNING
This equipment is not waterproof. To prevent a fire
or shock hazard, do not place any container filed
with liquid near this equipment (such as a vase or
flower pot) or expose it to dripping, splashing, rain
or moisture.
D3-4-2-1-3_A_En
When using this product follow the instructions
written on the underside of the unit, which
concern rated voltage, etc.
D3-4-2-2-4_En
WARNING: Handling the cord on this product or
cords associated with accessories sold with the
product will expose you to lead, a chemical known to
the State of California and other governmental
entities to cause cancer and birth defects or other
reproductive harm.
D36-P4_En
Wash hands after handling
CAUTION
PREVENT ELECTRIC SHOCK DO
NOT USE THIS (POLARIZED) PLUG
WITH AN EXTENSION CORD.
RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE
FULLY INSERTED TO PREVENT
BLADE EXPOSURE.
ATTENTION POUR PREVENIR LES CHOCS
ELECTRIQUES NE PAS UTILISER
CETTE FICHE POLARISEE AVEC UN
PROLONGATEUR UNE PRISE DE
COURANT OU UNE AUTRE SORTIE
DE COURANT, SAUF SI LES LAMES
PEUVENT ETRE INSEREES A FOND
SANS EN LAISSER AUCUNE PARTIE
A DECOUVVERT.
D2-4-4-1_EF
NOTE: THE NO USER-SERVICEABLE PARTS COMPARTMENT WARNING IS LOCATED ON THE APPLIANCE BOTTOM.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme
à la norme NMB-003 du Canada.
D8-10-1-3_EF
IMPORTANT NOTICE THE SERIAL NUMBER FOR
THIS EQUIPMENT IS LOCATED IN THE REAR.
PLEASE WRITE THIS SERIAL NUMBER ON YOUR
ENCLOSED WARRANTY CARD AND KEEP IN A
SECURE AREA. THIS IS FOR YOUR SECURITY.
D1-4-2-6-1_En
Information to User
Alteration or modifications carried out without
appropriate authorization may invalidate the user's
right to operate the equipment.
D8-10-2_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
S002_En
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly. After you have finished
reading the instructions, put them away in a safe place for future reference.
In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory
drawings. However the method of connecting and operating the unit is the same.
K015 En
CAUTION: This product satisfies FCC regulations
when shielded cables and connectors are used to
connect the unit to other equipment. To prevent
electromagnetic interference with electric appliances
such as radios and televisions, use shielded cables
and connectors for connections.
D8-10-3a_En
CAUTION : USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
CAUTION : THE USE OF OPTICAL INSTRUMENTS
WITH THIS PRODUCT WILL INCREASE
EYE HAZARD.
D6-8-2-1_En
3
BEFORE OPERATING (FEATURES)
FEATURES
Designed for professional use by DJs, the CDJ-200 compact
disc player provides all the functions and performance re-
quired in disco clubs while offering performance, sound qua-
lity and functionality superior to analog players.
DIGITAL JOG BREAK
Equipped with Digital Jog Break for original sound effects.
Individual remix assist functions [JET], [ZIP] and [WAH] have
been provided individually in three buttons. By choosing a
function and operating the jog dial in time with the music, a
new remix world can be experienced.
JOG DIAL
A large 100 mm diameter jog dial enables corrections to un-
even beats with the feeling of an analog turntable.
I PITCH BEND
This function changes the music tempo depending on the di-
rection and speed the jog dial is rotated.
I FRAME SEARCH
Moves the pause position in frame units (1/75 sec) when the
jog dial is rotated in the pause mode.
I SUPER-FAST SEARCH
By turning the jog dial while holding down the manual search
button or the track search button, disc search can be per-
formed faster than normal search or track search functions.
TEMPO CONTROL
100 mm long high-precision slider allowing free speed adjust-
ment.
With a digital display calibrated in 0.02 % units (within a ±6 %
range), tempo adjustments can be made more easily and ac-
curately.
I TEMPO CONTROL RANGE
The maximum variable range can be set to three variable
ranges; ±6 %, ±10 %, ±16 %, to provide easier operation envi-
ronment.
I MASTER TEMPO
Maintains the same pitch of sound while changing the music
tempo.
CUE
I BACK CUE
After storing cue points in memory, press the CUE button
while playing a track to return and start from the stored cue
point.
I AUTO CUE
Skips the non-recorded part at the top of a track and automati-
cally enters stand-by mode at the track's starting point, allow-
ing playback to begin instantly when the PLAY/PAUSE button
(
6) is pressed.
I CUE POINT SAMPLER
Playback can be started at one touch from a stored cue point,
convenient for confirming start points and as sampler.
REAL TIME SEAMLESS LOOP
This function simplifies the setting and canceling of loops.
The loop can be set at the very instant the track is being
played. By setting a loop just before the end of the track, the
track can be made so that it doesn't stop. In addition, an
ADJUST mode has been added to enable one-touch adjust-
ments to the loop-out point, thereby facilitating the loop op-
eration.
RELOOP
Allows returning to the set loop position any number of times.
Press the RELOOP/EXIT button after canceling loop play to
return to the loop start position. By using the loop ON and OFF
combined with the rhythm of the track, new sound effects can
be created.
PLAYING ADDRESS
The bar graph provides a visual reference of the track play-
back progress that enables the user to visualize the current
playback position, in the same way as is done with an analog
record by checking the position of the needle. The current po-
sition can be confirmed by the length of the graph, and in ad-
dition, the graph flashes to notify the ending of the track.
SLOT IN
The disc can be inserted without the opening of trays and
doors, making possible quick track selection.
FADER START
By connecting this unit to DJ mixer DJM-500, DJM-600, DJM-
300, DJM-3000, DJM-909, or DJM-707, QUICK START and
BACK CUE functions can be performed by using the mixer's
fader function.
RELAY PLAY
Two CDJ-200 units can be connected in tandem to perform
automatic relay play.
When track playback stops on one of the players, the standby
mode of the other player is released and playback begins au-
tomatically.
OIL DAMPER FLOAT
OIL DAMPER FLOAT construction helps resist shakes and im-
pacts.
This unit features an OIL DAMPER FLOAT design, making it
harder for distortions and sound breakup to occur due to im-
pacts from operation and vibrations from the floor.
MULTI READ
Supports playback of CD-R and CD-RW discs. (Some discs
may not replay properly, however, due to certain special
characteristics of some discs and recorders, as well as due to
dirty or damaged discs.)
CD TEXT
Displays CD TEXT on CD TEXT-supported discs.
4
BEFORE OPERATING (PLAYING MP3 FILES)
PLAYING MP3 FILES
MP3 files must follow the format requirements listed below.
MP3 format
Disc format
MPEG-1
MPEG-2
ID3 tag
File extension
Folder levels
Maximum number of folders
Maximum number of files
Multi-session
CD-R recording method
Supports Audio Layer-3 sampling frequency 32 kHz, 44.1 kHz, 48 kHz,
Bit Rate 32 Kbps 320 Kbps.
Supports Audio Layer-3 sampling frequency 16 kHz, 22.05 kHz, 24 kHz,
Bit Rate 16 Kbps 160 Kbps.
Does not support Variable Bit Rate (VBR).
Displays only file name, artist, album name.
ID3 tag title not displayed.
.mp3, .MP3, .mP3, .Mp3
Maximum of 8 folders.
Files located in folders exceeding 8 levels cannot be played.
99 (99 folders + 1 root)
999 (per folder)
Does not support multi-session.
When the disc used is a multi-session disc, only the first session will
be played.
Record following the ISO9660 CD-ROM file system.
Supports only Disc At Once or Track At Once.
CDJ-200 does not support Packet Write recorded discs.
* The song title displayed in the text mode will be the file name.
* CDJ-200 is not equipped with a File Sort function; tracks will be played in the order in which they were recorded.
CONTENTS
BEFORE OPERATING
FEATURES ................................................................... 3
PLAYING MP3 FILES ................................................... 4
CAUTIONS REGARDING HANDLING ........................ 5
CONNECTIONS ............................................................ 6
PANEL FACILITIES ...................................................... 8
OPERATIONS
DISC LOADING/UNLOADING ................................... 10
OPERATIONS ............................................................. 11
Auto Cue Function ............................................... 11
Starting Playback ................................................. 11
Resume Function ................................................. 11
To Stop Playback ................................................. 11
To Temporarily Interrupt Playback .................... 11
Jog Dial Functions ............................................... 11
Fast-Forward/Fast-Reverse ................................. 12
Track Cueing ........................................................ 12
Folder Search ....................................................... 12
Change Playback Speed ..................................... 12
Applying Master Tempo ..................................... 13
Digital Jog Break ................................................. 13
Cue Point Settings ............................................... 13
Mixing Different Tracks ....................................... 14
Loop Playback ...................................................... 14
Fader Start Playback ........................................... 15
Relay Play Using Two Players ............................ 15
OTHER
TROUBLESHOOTING ................................................ 16
SPECIFICATIONS ....................................................... 18
5
BEFORE OPERATING (CAUTIONS REGARDING HANDLING)
CAUTIONS REGARDING HANDLING
Location
Install the player in a well-ventilated location where it will not be
exposed to high temperatures or humidity.
Do not install the player in a location which is exposed to direct sun-
light, or near stoves or radiators. Excessive heat can adversely affect
the cabinet and internal components. Installation of the player in a
damp or dusty environment may aiso result in a malfunction and can
be hazardous. Avoid installation near cookers etc., where the player
may be exposed to oily smoke, steam or heat.
Installation Guidelines
÷ Placing and using the compact disc player for long periods on
heat-generating sources such as amplifiers or near spotlights, etc.
will affect product performance. Avoid placing the player on heat-
generating sources.
÷ Install this compact disc player as far as possible away from tuners
and TV sets. A compact disc player installed in close proximity to
such equipment may cause noise or degradation of the picture.
÷ Noise may be noticeable when an indoor antenna is used. In such
cases, make use of an outdoor antenna or turn off power to the
compact disc player.
÷ When the unit is used in a loud-sound environment, e.g., near a
speaker, sound skip may occur. Install the unit away from the
speaker or reduce the listening vol-
ume.
÷ Place this unit on a level surface
and a stable platform.
÷ Be sure the player, including its au-
dio and power supply cords, does
not touch vibrating materials. Any
cause of vibration other than the in-
sulators may cause the disc to skip.
Take special care when using the
player while it is installed in a carry-
ing case.
¶ Please be sure to leave
a space to allow for
heat radiation.
Do not place on or
against vibrating
materials!
Cleaning the Player
To clean the PLAYER wipe with a polishing or a soft, dry cloth. For
stubborn dirt, moisten a soft cloth with a weak solution of neutral
detergent (diluted in five to six parts water), wring the cloth well, and
wipe away the dirt. Use a dry cloth to wipe the surface dry. Do not use
volatile liquids such as benzene or thinner which will damage the
unit.
CD Lens Cleaner
The player's pickup lens should not become dirty in normal use. If for
some reason, the lens becomes soiled and malfunctions, contact
your nearest PIONEER authorized service center. Lens cleaners for
CD players are commercially available, but special care should be
exercised in their use as some may cause damage to the lens.
Copy Controlled CDs
This product is designed to play discs in conformity with CD
standards; no guarantee is given for operation or performance when
using CDs which do not conform to these CD standards.
Storing Discs
÷ Discs are made of the same kinds of plastic used for conventional
analog audio records. Be careful not to allow discs to warp. Al-
ways store discs in their cases vertically, avoiding locations with
high heat, humidity, or extremely low temperatures. Avoid leav-
ing discs in cars; the interior of a car in direct sunlight can become
extremely hot.
÷ Always read and abide by the precautionary notes listed on disc
labels.
Condensation
When this unit is brought into a warm room from previously cold
surroundings or when the room temperature rises sharply, conden-
sation may form inside the unit and impair its performance. In such
cases, allow the unit to stand for about an hour or raise the room
temperature gradually.
Cleaning and Handling Compact Discs
÷ The presence of fingerprints or smudges on the surface of the disc
will not directly affect the recorded signals, but, depending on the
degree of contamination, the brightness of the light reflected from
the signal surfaces may be reduced causing degradation of sound
quality. Always keep your discs clean by wiping them gently with
a soft cloth from the inner edge toward the outer edge.
÷ If a disc becomes very dirty, dampen a soft cloth with water, (be
sure to wring it out well) and wipe the away dirt gently. Remove
any water drops with another soft, dry cloth.
÷ Do not use record cleaning sprays or anti-static agents on discs.
Never clean discs with benzene, thinner, or other volatile solvents
or damage to the disc surface may result.
÷ With this player, use only those discs
which display the mark shown right
(Optical audio digital discs).
÷ SACD hybrid discs cannot be played.
÷ When holding discs, do not touch their signal surfaces. Hold by
the edges, or by one edge and the center hole.
÷ Do not affix gummed labels or tape to the disc surface. Also, do
not scratch or damage the label.
÷ Discs rotate at high speeds inside the player. Do not use damaged,
cracked or warped discs.
Do not play a CD with a special shape
Do not play a CD having other shape than a circular disc, such as
heart shaped disc. Otherwise malfunction may occur.
'