MODEL CD-8400
FILE-TYPE CD PLAYER
Catalog Number: 42-5064
¶ The service manual for this product includes Pioneer's RRV1898 PD-F907/KU service manual. The
pages preceding that manual list additional specifications, all service changes between Pioneer's
RRV1898 PD-F907/KU and the 42-5064 CD8400, and any RadioShack part numbers that are different
from the Pioneer part numbers.
¶ The specifications on Page 51 of the RRV1898 service manual for Pioneer's model PD-F907/KU are
like the specifications listed in the owner's manual for the 42-5064 CD-8400. Additional specs are
given on the page inside the back cover.
© 1998 Tandy Corporation.
All Rights Reserved.
Optimus and Radio Shack are registered trademarks used by Tandy Corporation.
42-5064
2
PART NUMBER DIFFERENCES BETWEEN 42-5064 CD-8400 AND
PD-F907/KU
42-5064
CD-8400
PACKING
P3 - 3
Remote Control Unit (CU-PD080)
PWW1132
Not used
P3 - 3
Remote Control Unit
Not used
PYY1262
P3 - 4
Battery Cover
AZA7204
PZN1105
P3 - 5
NSP
Warranty Card
ARY1044
Not used
P3 - 6
Operating Instructions (English)
PRB1263
PRB1272
P3 - 11
Packing Case
PHG2285
PHG2325
P3 - 13
NSP
Battery (R6P, AA)
VEM-013
Not used
EXTERIOR SECTION
P6 - 18
Rear Base
PNA2389
PNA2431
P6 - 44
Control Button
PAC1822
PAC1899
P6 - 45
Power Button
PAC1833
PAC1900
P6 - 46
Name Plate
VAM1073
AAM7001
P6 - 47
Display Window
PAM1725
PAM1765
P6 - 52
Hood
PNW2732
PNW2824
P6 - 50
Operation Panel
PNW2773
PNW2825
Ref.No. Mark
Symbol and Description
42-5064 CD-8400 and PD-F907/KU are constructed the same except for the following:
NOTES :
÷ Parts marked by " NSP " are generally unavailable .
÷
indicates safety critical components. Be sure to replace only with specified parts.
÷ Ref. No. : Numbers following P and hyphen() indicate the page(s) and location number(s) in the RRV1898 service manual,
respectively.
Remarks
Parts No.
PD-907/KU
ORDER NO.
Service
Manual
PIONEER ELECTRONIC CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V . Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 501 Orchard Road, #10-00 Lane Crawford Place, Singapore 0923
C
C
C
C
C PIONEER ELECTRONIC CORPORATION 1997
FILE-TYPE CD PLAYER
RRV1898
TZZY DEC. 1997 Printed in Japan
PD-F957
CONTENTS
1. SAFETY INFORMATION .................................... 2
2. EXPLODED VIEWS AND PARTS LIST ............. 3
3. SCHEMATIC DIAGRAM ................................... 11
4. PCB CONNECTION DIAGRAM ....................... 19
5. PCB PARTS LIST ............................................. 24
6. ADJUSTMENT .................................................. 28
7.GENERAL INFORMATION ............................... 36
7.1 PARTS ........................................................ 36
7.1.1 IC .......................................................... 36
7.1.2 DISPLAY ............................................... 37
7.2 DIAGNOSIS ................................................ 39
7.2.1 ERROR CORD DISPLAY ................. 39
7.2.2 ERROR HISTORY AND DISPLAY ... 39
7.2.3 ERROR HISTORY DISPLAY ............ 40
7.2.4 DISASSEMBLY ................................. 41
7.3 BLOCK DIAGRAM ...................................... 49
8. PANEL FACILITIES AND SPECIFICATIONS
................................................................... 50
PD-F907
KU
O
AC120V
KC
O
AC120V
KU/CA
O
AC120V
Type
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
PD-F957
Model
Power Requirement
Remarks
PD-F907
D
FILETYPE
COMPACT DISC PLAYER
PD-F905
Î
SINGLE
LOADER
ACSESS
PLAY
UNLOAD
BEST
PREVIOUS
DISC
TITLE
INPUT
PROGRAM
TRACK
MIN
SEC
DISC
TITLE
DISPLAY
HI-LITE
CLEAR
MODE
FILE TYME CD MECHANISM
OPEN/
CLOSE
PD-F957,PD-F907
2
1. SAFETY INFORMATION
1. SAFETY PRECAUTIONS
The following check should be performed for the
continued protection of the customer and service
technician.
ANY MEASUREMENTS NOT WITHIN THE LIMITS
OUTLINED ABOVE ARE INDICATIVE OF A PO-
TENTIAL SHOCK HAZARD AND MUST BE COR-
RECTED BEFORE RETURNING THE APPLIANCE
TO THE CUSTOMER.
2. PRODUCT SAFETY NOTICE
Many electrical and mechanical parts in the appli-
ance have special safety related characteristics. These
are often not evident from visual inspection nor the
protection afforded by them necessarily can be ob-
tained by using replacement components rated for
voltage, wattage , etc.
Replacement parts which have
these special safety
characteristics are identified in
this Service Manual.
Electrical components having such features are
identified by marking with a
on the schematics and
on the parts list in this Service Manual.
The use of a substitute replacement component which
does not have the same safety characteristics as the
PIONEER recommended replacement one, shown in
the parts list in this Service Manual, may create shock,
fire, or other hazards.
Product Safety is continuously under review and
new instructions are issued from time to time. For
the latest information, always consult the current
PIONEER Service Manual. A subscription to, or
ad-
ditional copies of, PIONEER Service Manual may be
obtained at a nominal charge from PIONEER.
LEAKAGE CURRENT CHECK
Measure leakage current to a known earth ground
(water pipe, conduit, etc.) by connecting a leakage
current tester such as Simpson Model 229-2 or
equivalent between the earth ground and all exposed
metal parts of the appliance (input/output terminals,
screwheads, metal overlays, control shaft, etc.). Plug
the AC line cord of the appliance directly into a 120V
AC 60 Hz outlet and turn the AC power switch on. Any
current measured must not exceed 3.5 mA.
(FOR USA MODEL ONLY)
Also test with plug
reversed
(Using AC adapter
plug as required)
Device
under
test
Test all exposed
metal surfaces
Earth ground
Leakage
current
tester
Reading should
not be above
3.5 mA
AC Leakage Test
This service manual is intended for qualified service technicians; it is not meant for the casual
do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been
trained to properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may
void the warranty. If you are not qualified to perform the repair of this product properly and safely, you
should not risk trying to do so and refer the repair to a qualified service technician.
WARNING
Lead in solder used in this product is listed by the California Health and Welfare agency as a known reproductive toxicant whic h
may cause birth defects or other reproductive harm (California Health & Safety Code, Section 25249.5).
When servicing or handling circuit boards and other components which contain lead in solder, avoid unprotected skin contact with
the solder. Also, when soldering do not inhale any smoke or fumes produced.
REMARQUE
(POUR MODÈLE CANADIEN SEULEMENT)
Les symboles de fusible
(fusible de type rapide) et/ou
(fusible de type lent) sur CCI indiquent que les
pièces de remplacement doivent avoir la même désignation.
NOTICE
(FOR CANADIAN MODEL ONLY)
Fuse symbols
(fast operating fuse) and/or
(slow operating fuse) on PCB indicate that replacement parts
must be of identical designation.
PD-F957,PD-F907
3
2. EXPLODED VIEWS AND PARTS LIST
NOTES :
÷ Parts marked by " NSP " are generally unavailable because they are not in our Master Spare Parts List.
÷ The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
÷ Screw adjacent to
mark on the product are used for disassembly.
2.1 PACKING
Mark No.
Description
Parts No.
(1) PARTS LIST
1
Control Cable (L=1.0m)
PDE1247
2
Output Cable (L=1.0m)
PDE1248
3
Remote Control Unit
See Contrast table (2)
4
Battery Cover
AZN7204
NSP
5
Warranty Card
See Contrast table (2)
6
Operating Instructions (English)
See Contrast table (2)
7
Operating Instructions (French))
See Contrast table (2)
8
Polyethlene Bag
Z21 - 038
9
Styrol Protector F
PHA1307
10
Styrol Protector R
PHA1308
11
Packing Case
See Contrast table (2)
12
Mirror Mat
Z23 - 0204
NSP
13
Battery (R6P, AA)
VEM - 013
Mark No.
Symbol & Description
Remarks
Part No.
PD-F957/
PD-F907/
PD-F907
KU/CA
KU
KC
(2) CONTRAST TABLE
PD-F907/KU,KC and PD-F957/KU/CA have the same construction except for the following:
3
Remote Control Unit
PWW1130
PWW1132
PWW1132
(CU-PD088)
(CU-PD080)
(CU-PD080)
NSP
5
Warranty Card
ARY1044
ARY1044
ARY1039
6
Operating Instructions (English)
PRB1264
PRB1263
PRB1263
7
Operating Instructions (French)
Not used
Not used
PRD1023
11
Packing Case
PHG2304
PHG2285
PHG2286
Front
9(1/2)
10(1/2)
11
6
5
4
3
9(2/2)
10(2/2)
13
8
2
12
1
7
PD-F907/KC only