ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
Color LCD Display
This product conforms to new cord colors.
Los colores de los cables de este producto se conforman con un nuevo
código de colores.
Dieses Produkt entspricht den neuen kabelfarben.
Owner's Manual
AVD-W6000
1
Contents
Contents ...................................................... 1
IMPORTANT SAFEGUARDS .................... 2
Please Read All of These Instructions
Regarding Your Display and Retain
them for Future Reference ........................ 2
IMPORTANT INFORMATION .................... 3
About This Product .......................................... 3
Precaution .......................................................... 3
In Case of Trouble ............................................ 3
Before Using This Product ...................... 4
To Avoid Battery Exhaustion ............................ 4
To Protect the LCD Screen of the Display ........ 4
When Viewing is Difficult, use [BRIGHT] and
[DIMMER] to Adjust ................................ 4
To Ensure Safe Driving .................................... 5
Resetting the Microprocessor ............................ 5
Key Finder .................................................... 6
Component Parts and Features .......................... 6
Basic Operation ........................................ 7
Turn On Power .................................................. 8
Volume Adjustment .......................................... 8
Selecting the Source .......................................... 9
-
About the Corner Icons
-
About the RCA Video and Audio Outputs
of this Unit
Selecting the Audio, Video, and External
Output........................................................ 10
-
Selecting the Video for the Display
Independently
-
Selecting the Audio for Built-in Speaker
Independently
Changing the Wide Screen Mode .................... 12
-
Wide Modes Available
Operating the Setup Menu .................... 14
Entering the Setup Menu ................................ 14
Picture Adjust .................................................. 15
-
BRIGHT/CONTRAST/COLOR/HUE
-
DIMMER
Input Setting [VCR1/VCR2] .......................... 17
Display Setting ................................................ 18
-
Setting the Mixing of the Guidance Voice
[MIXING]
-
Setting the Display Mounting Location
[LOCATION]
Forced VCR1 Input Setting ............................ 20
Using the Display Correctly .................. 21
Handling the Display ...................................... 21
About the Liquid Crystal Display (LCD)
Screen ...................................................... 22
Keeping the Display in Good Condition ........ 22
About the Small Fluorescent Tube .................. 22
Connecting the System .......................... 23
Names and Functions of Connection
Terminals .................................................. 25
Connecting the Power Cable .......................... 26
Connection Diagram (VCR input) .................. 27
Connection Diagram (RGB input) .................. 28
Connecting the RCA Audio and
Video Output ............................................ 29
Connecting "AUTOMATIC INPUT
SWITCHING" Lead ................................ 30
Installation ................................................ 31
-
When the Display is Installed in the Front
Before Installing and Fixing ............................ 32
Before Affixing the Adhesive Tape ................ 32
Installing the Display Using the Accessory
Mounting Base ........................................ 33
Installing the Hide-away Unit ........................ 35
-
Installation Precautions
-
Hide-away Unit Installation
Specifications .......................................... 36
2
ENGLISH
ESPA
Ñ
OL
DEUTSCH
FRAN
Ç
AIS
ITALIANO
NEDERLANDS
IMPORTANT SAFEGUARDS
Please Read All of These Instructions Regarding Your Display
and Retain them for Future Reference
1. Read this manual fully and carefully before operating your display.
2. Keep this manual handy for future reference.
3. Pay close attention to all warnings in this manual and follow the instructions care-
fully.
4. Never allow others to use the system until they have read and understood the
operating instructions.
5. Do not install the display where it may (i) obstruct the driver's vision, (ii) impair
the performance of any of the vehicle's operating systems or safety features,
including airbags, or (iii) impair the driver's ability to safely operate the vehicle.
6. As with any accessory in your vehicle's interior, the display should not divert
your attention from the safe operation of your vehicle. If you experience difficul-
ty in operating the system or reading the display, please park safely before mak-
ing adjustments.
7. Do not attempt to install or service your display by yourself. Installation or ser-
vicing of the display by persons without training and experience in electronic
equipment and automotive accessories may be dangerous and could expose you
to the risk of electric shock or other hazards.
8. Please remember to wear your seat belt at all times while operating your vehicle.
If you are ever in an accident, your injuries can be considerably more severe if
your seat belt is not properly buckled.
9. If this product is installed in a place where it is visible to the vehicle's driver, you
MUST always set the [DISPLAY SETTING] to the [FRONT] setting. Failure to
do so could result in distracting images being potentially visible to the driver
while the vehicle is in motion.
If this product is installed in a place where it is not visible to the vehicle's driver,
then you may choose the [REAR] location setting.
Use of this product is subject to any local laws regarding placement or use.
PIONEER Corporation cannot accept any liability for any problems, damage or
loss incurred as a result of the product being used with an incorrect setting or in
violation of any local laws.
10. This function is designed for use with a back-up camera only. Users may connect
the VTR 1 input with "AUTOMATIC INPUT SWITCHING" only to such a
back-up camera. Users must not connect any other devices to the VTR 1 input
with "AUTOMATIC INPUT SWITCHING".
3
About This Product
· Do not place the display in a position where it will impede the driver's visibility or
affect the operation of your vehicle's airbags.
Precaution
· Always keep the volume low enough for outside sounds to be audible.
· Protect the product from moisture.
In Case of Trouble
Should this product fail to operate properly, contact your dealer or the nearest authorized
Pioneer service facility.
· This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and
CE Marking Directive (93/68/EEC).
IMPORTANT INFORMATION
To Avoid Battery Exhaustion
Always run the vehicle engine while using this unit. Using this unit without running the
engine can result in battery drainage.
To Protect the LCD Screen of the Display
· Do not allow direct sunlight to fall on the Display when this unit is not being used.
Extended exposure to direct sunlight can result in LCD screen malfunction due to the
resulting high temperatures.
· When using a portable phone, keep the antenna of the portable phone away from the
Display to prevent disruption of the video by the appearance of spots, colored stripes,
etc.
When Viewing is Difficult, use [BRIGHT] and [DIMMER] to Adjust
Due to its construction, the view angle of the LCD screen is limited. The viewing angle
(vertical and horizontal) can be increased, however, by using [BRIGHT] to adjust the
black density of the video. When using for the first time, adjust the black density in accor-
dance with the viewing angle (vertical and horizontal) to adjust for clear viewing.
[DIMMER] can also be used to adjust the brightness of the LCD screen itself to suit your
personal preference.
4
ENGLISH
ESPA
Ñ
OL
DEUTSCH
FRAN
Ç
AIS
ITALIANO
NEDERLANDS
Before Using This Product