Model CDR420 User Guide
Recordable
®
CLASS 1 LASER PRODUCT
LOUKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
HD/CD Recorder
- 2 -
Warnings and Cautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of un-insulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
LASER SAFETY
This unit employs lasers. Only a qualified service person should remove the cover or at-
tempt to service this device, due to possible eye injury.
CAUTION USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURE OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNINGS FOR LASER RADIATION
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN, DO NOT STARE INTO BEAM.
DANGER:
INVISIBLE LASER RADIATION WHEN OPEN, AVOID DIRECT EXPOSURE TO BEAM.
VAROI:
AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTINANAYMÄTTÖMÄALLE
LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
VARNING! OSYNLIGH LASERSTÄLNING NÄR DENNA DEL ÄR ÖPPNAD OCH SPÄRREN ÄR URKOPP-
LAD. BETRAKTA EJ STRALEN.
NOTE TO CATV SYSTEM INSTALLER:
This reminder is provided to call the CATV (Cable-TV)
system installer's attention to Article 820-40 of the NEC,
which provides guidelines for proper grounding and, in par-
ticular, specifies that the cable ground shall be connected to
the grounding system of the building, as close to the point of
cable entry as practical.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one
or more of the following measures:
· Re-orient or relocate the receiving antenna.
· Increase the separation between the equipment and re-
ceiver.
· Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician
for help.
NOTE: Changes or modifications may cause this unit to
fail to comply with Part 15 of the FCC Rules and may void
the user's authority to operate the equipment.
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION
810-20)
GROUNDING
GROUNDING
CONDUCTORS
CONDUCTORS
(NEC SECTION
(NEC SECTION
810-21)
810-21)
ELECTRIC
SERVICE
EQUIPMENT
GROUND CLAMPS
GROUND CLAMPS
POWER SERVICE
POWER SERVICE
GROUNDING
GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
FIGURE 1
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
- 3 -
NEC - NATIONAL ELECTRICAL CODE
WARNINGS
· Do not expose the equipment to rain or moisture.
· Do not remove the cover from the equipment.
· Do not insert anything into the equipment
through the ventilation holes.
· Do not handle the mains lead with wet hands.
· Do not cover the ventilation with any items such
as tablecloths, newspapers, curtains, etc.
· No naked flame sources, such as lighted candles,
should be placed on the equipment.
· When disposing of used batteries, please comply
with governmental regulations or environmen-
tal public instruction's rules that apply in your
country or area.
· Do not place anything about 0.1 meter above the
top panel.
· Make a space of about 0.1 meter around the unit.
· No objects filled with liquids, such as vases,
shall be placed on the apparatus.
· When the switch is in the OFF position, the
equipment is not completely switched off from
MAINS.
When setting up the recorder ensure that:
· it will not be exposed to interference from exter-
nal equipment.
· it will not be exposed to electrostatic discharges.
· it will not be exposed to direct sunlight.
· heavy objects are not placed on the recorder.
Equipment mains working system
This product complies with household power and
safety requirements in your area. US units are supplied
with power units that can be powered by 120 V AC
only.
This Class A digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la Classe A est conforme
á la norme NMB-003 du Canada.
Copyright
Recording and playback of any material may require
consent. For further information refer to the following
US ordinances:
· Copyright act of 1956
· Dramatic and Musical Performance Act 1958
· Performers Protection Acts 1963 and 1972
· any subsequent statutory enactments and orders
- 4 -
Important Safety Instructions
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to meet strict
quality and safety standards. There are, however, some
installation and operation precautions which you should be
particularly aware of.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in ac-
cordance with the manufacture's instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
groundingtype plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand,
tripod, bracket, or table speci-
fied by the manufacturer, or
sold with the apparatus. When
a cart is used, use caution
when moving the cart/ap-
paratus combination to avoid
injury from tip-over.
Additional Safety Information!
·
This product should not be placed in a built-in installa-
tion such as a bookcase or rack unless proper ventila-
tion is provided or the manufacturer's instructions have
been adhered to.
·
Apparatus shall not be exposed to dripping or splash-
ing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
·
When the switch is in the OFF position, the apparatus
isn't completelyswitched-off from the MAINS.
Precautions - installation
· Do not expose the CDR420 to excessive heat, excessive
cold, rain, moisture, or dust this may cause damage to the
unit.
· If a foreign object or water does enter the unit, contact
your nearest dealer or service center.
· All players produce some heat during operation and this
heat must be allowed to dissipate freely. Do not close any
ventilation openings and be sure there is adequate venti-
lation space behind, beside and above the player so air is
allowed to circulate freely around the unit.
· Be sure ventilation holes are not covered.
· Prevent extra heat from reaching the unit. Never put the
CDR420 in direct sunlight or near a heat source.
· Do not expose the CDR420 to electrostatic discharges.
· Do not place heavy objects on the unit.
· Be sure the CDR420 is placed on a vibration-free surface.
Precautions - connection
· Unplug the power adapter from the AC outlet or turn off
the POWER switch before making any connection.
· Connect one cable at a time observing the `input' and
`output' labeling. This will avoid any cross connections
between channels and signal inputs and outputs.
· Insert plugs securely. An incomplete connection may
result in noise.
· Before connecting other audio or video equipment to the
CDR420, please read their owner's manuals.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Ser-
vicing is required when the apparatus has been dam-
aged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has
been dropped.
Specifications
Digital Audio System
System......................................................................................................................................... Hard Disk Recorder
Recording media ...............................................................................................................................2.5" 20GB HDD
Burning CD media .....................................................................................................................CD-R, CD-RW discs
Recording audio format
MP3 (.mp3) .................................................................................................. MPEG Audio Layer 3 compression
WAVE (.wav)...........................................................................................................................16 bit linear PCM
Recording bit rate
MP3 Stereo......................................................................................................... 320, 256, 160, 128, 80, 64 kbps
MP3 Mono.............................................................................................................. 160, 128, 80, 64, 40, 32 kbps
Sampling frequency ...................................................................................................................................... 44.1 kHz
Number of channels .....................................................................................................................2 (stereo), 1 (mono)
Frequency response...................................................................................................................... 20,000 Hz (-0.5dB)
Inputs/Outputs
MIC/LINE IN L/R
Type..................................................................................................................XLR (1:GND, 2:HOT, 3:COLD)
¼" T-R-S phone jack
Line level
Input sensitivity/Impedance ................................................................................................500 mVrms/2k ohms
Signal-to-Noise ratio (IEC-A weighted) ..................................................................................................... 80 dB
Total Harmonic Distortion (0dB, PCM)..................................................................................................... 0.05%
MIC level
Input Sensitivity/Impedance....................................................................................................1 mVrms/2k ohms
Signal-to-Noise ratio (IEC-A weighted) ..................................................................................................... 60 dB
Total Harmonic Distortion (0dB, PCM)....................................................................................................... 0.2%
AUX IN L/R
Input Sensitivity/Impedance..................................................................................................... 1 Vrms/23k ohms
Signal-to-Noise ratio (IEC-A weighted) ..................................................................................................... 87 dB
Total Harmonic Distortion (0dB, PCM)..................................................................................................... 0.05%
LINE OUT L/R
Type.......................................................................................................................................................RCA jack
Standard level/Impedance .......................................................................................................... 1 Vrms/2k ohms
MIX OUT L/R
Type.......................................................................................................................................................RCA jack
Standard level/Impedance .......................................................................................................... 1 Vrms/2k ohms
DIGITAL IN/OUT
Type.......................................................................................................................................................RCA jack
Standard output level/Impedance .............................................................................................0.5 Vp-p/75 ohms
Sampling frequency................................................................................................................................ 44.1 kHz
KEYBOARD ........................................................................................................................................................ PS2
USB......................................................................................................................................................... USB Type B
General
Headphone Output (10% THD)........................................................................................................ 70 mW/32 ohms
Speaker Output......................................................................................................................................
Speaker Output
Speaker Output
1.7 W/8 ohms
Phantom power .......................................................................................................................................
Phantom power
Phantom power
+48V, 10mA
Power requirement.............................................................................................................
Power requirement
Power requirement
AC100V-240V, 50/60 Hz
Power consumption (maximum).................................................................................................................12V, 1.4A
continues
- 5 -