AUDIO VIDEO SURROUND RECEIVER
VR-606
VR-616
INSTRUCTION MANUAL
KENWOOD CORPORATION
B60-5228-00 00
ID
(K, P)
0111
This instruction manual is for some models. Model availability and features
(functions) may differ depending on the country and sales area.
About the supplied remote control
Compared to standard remote controls, the remote control supplied with this receiver has several
operation modes. These modes enable the remote control to control other audio/video components. In
order to effectively use the remote control it is important to read the operating instructions and obtain a
proper understanding of the remote control and how to switch its operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the operation
modes may result in incorrect operations.
*5228/01-06/EN
14/06/2002, 11:53 AM
1
2 EN
Unpacking
Unpack the unit carefully and make sure that all accessories are
present.
FM indoor antenna (1)
AM loop antenna (1)
For VR-606/616
Remote control unit (1)
Batteries (R6/AA) (2)
RC-R0728
If any accessories are missing, or if the unit is damaged or fails to operate,
notify your dealer immediately. If your unit was shipped to you directly,
notify your shipper immediately. Kenwood recommend that you retain
the original carton and packing materials in case you need to move or ship
the unit in the future.
Keep this manual handy for future reference.
Units are designed for operation as follows.
U.S.A. and Canada ........................................... AC 120 V only
Australia ........................................................... AC 240 V only
Europe and U.K. ............................................... AC 230 V only
China and Russia ............................................. AC 220 V only
Other countries .......... AC 110-120 / 220-240 V switchable*
Before applying the power
Caution : Read this page carefully to ensure safe
operation.
Safety precautions
WARNING :
TO PREVENT FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,
WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF UNINSULATED
"DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S
ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE
TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO
PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL
TRIANGLE IS INTENDED TO ALERT THE USER TO THE
PRESENCE
OF
IMPORTANT
OPERATING
AND
MAINTENANCE (SERVICING) INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE APPLIANCE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Maintenance of the unit
When the front panel or case becomes dirty, wipe with a soft, dry
cloth. Do not use thinner, benzine, alcohol, etc. for these agents may
cause discoloration.
In regard to contact cleaner
Do not use contact cleaners because it could cause a malfunction. Be
specially careful not to use contact cleaners containing oil, for they
may deform the plastic component.
*5228/01-06/EN
14/06/2002, 11:53 AM
2
3 EN
Before applying the power .............................. 2
Safety precautions ............................................. 2
Unpacking .......................................................... 2
How to use this manual ..................................... 4
Special features ................................................. 4
Names and functions of parts ......................... 5
Main Unit ........................................................... 5
Remote control unit ........................................... 6
Setting up the system ........................................ 7
Connecting audio components .......................... 8
Connecting video components .......................... 9
Digital connections .......................................... 10
Connecting a DVD player (6-channel input) ..... 11
Connecting the speakers ................................. 12
Connecting the terminals ................................ 13
Connecting the antennas ................................. 13
Connecting the system control ....................... 14
Preparing the remote control .......................... 14
Preparing for surround sound ....................... 15
Speaker settings .............................................. 15
Normal playback .............................................. 17
Preparing for playback ..................................... 17
Listening to a source component .................... 17
Adjusting the sound ......................................... 18
Recording .......................................................... 19
Recording audio (analog sources) ................... 19
Recording video ............................................... 19
Recording audio (digital sources) .................... 19
Listening to radio broadcasts ....................... 20
Tuning radio stations ....................................... 20
Presetting radio stations manually .................. 20
Receiving preset stations ................................ 21
Receiving preset stations in order (P.CALL) ... 21
Ambience effects ............................................. 22
Surround modes .............................................. 22
Surround play ................................................... 24
DVD 6-channel playback .................................. 25
Convenient functions ....................................... 25
Basic remote control operations for other
components ....................................................... 28
Registering setup codes for other components
......................................................................... 28
Operating other components .......................... 29
Setup code chart .............................................. 30
CASSETTE deck, CD player & MD recorder
operations ........................................................ 31
Other components' operations ....................... 32
In case of difficulty .......................................... 34
Specifications .................................................. 36
Contents
Caution : Read the pages marked
carefully to ensure
safe operation.
Before applying the power
As an
ENERGY STAR® Partner, Kenwood
Corporation has determined that this product
meets the
ENERGY STAR® guidelines for
energy efficiency. This product can save
energy. Saving energy reduces air pollution and lowers utility bills.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes
or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this equipment
if an unauthorized change or modification is made.
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment may
cause harmful interference to radio communications, if it is not
installed and used in accordance with the instructions. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.
For the U.S.A.
Preparations
Operations
Remote
Control
Additional
Information
For the U.S.A.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the
point of cable entry as practical.
*5228/01-06/EN
14/06/2002, 11:53 AM
3
4 EN
Special features
True home theater sound
This receiver incorporates a wide variety of surround modes to bring you
maximum enjoyment from your video software. Select a surround mode
according to your equipment or the software you are going to play and
enjoy!
TM
Dolby Digital
The DOLBY DIGITAL mode lets you enjoy full digital surround from
software processed in the Dolby Digital format. Dolby Digital provides up
to 5.1 channels of independent digital audio for better sound quality and
more powerful presence than conventional Dolby Surround.
Dolby PRO LOGIC
II
DOLBY PRO LOGIC
II, whilst totally compatible with its predecessor
PRO LOGIC, provides greater advantages in surround sound. It allows
user to enjoy the conventional stereo or Dolby Surround with a convincing
"5.1 like" presentation. PRO LOGIC
II offers special features for controlling
the overall spatial, dimensionality and frontal sound field imaging. PRO
LOGIC
II produces an impressive surround sound from video software
marked
and three-dimensional space from music CD.
When listening to music, you will be able to enjoy the experience of sheer
STEREO surround sound.
DTS
DTS (Digital Theater System) is a 5.1 channel digital audio format that
provides five full-spectrum channels and one low-frequency (subwoofer)
channel for unprecedented clarity, optimum channel separation and a
(wide) dynamic range.
In the DTS mode, the 5.1 channel digital input from a DTS CD, LD or DVD
disc (carrying the "DTS" marking) can be played in Digital Surround.
Important:
When a DTS disc is played on a CD, LD or DVD player, noise may be
output from the analog output. It is recommended that you connect the
digital output of the player to the digital input of this unit.
DSP surround modes
The DSP (Digital Signal Processor) used for this receiver incorporates a
variety of high quality adjustable sound fields, like "ARENA", "JAZZ
CLUB", "THEATER", "STADIUM" and "DISCO". It is compatible with
almost any kind of program source.
DVD 6-channel input
If you own a DVD player equipped with 6-channel output, this receiver
allows you to obtain the full surround sound impact of DVD source
material featuring multi-channel encoding. Since the source signals are
digital and each channel is input independently, the resulting ambience
is far superior to what can be achieved with conventional surround sound
systems.
CINEMA EQ
Cinema EQ mode will produce a more dynamic sound quality in any
conditions. You can enjoy a more impressive sound effect when you
switch CINEMA EQ ON during Dolby Digital and DTS playback.
ACTIVE EQ
The ACTIVE EQ function provides an enhanced sound balance from the
5.1 channel speakers especially when small speakers are being used and
it is available during the receiver's operation.
However, this feature is not available during front large speaker selection
and DVD 6-channel playback.
Universal IR (InfraRed) remote control
In addition to the basic receiver, the remote control supplied with this
receiver can also operate almost all of your remote controllable audio and
video components. Just follow the simple setup procedure to register
the components you have connected.
How to use this manual
This manual is divided into four sections, Preparations, Operations,
Remote Control, and Additional Information.
Preparations
Shows you how to connect your audio and video components to the
receiver and prepare the surround processor.
Since this receiver works with all of your audio and video components,
we will guide you in setting up your system to be as easy as possible.
Operations
Shows you how to operate the various functions available on the
receiver.
Remote Control
Shows you how to operate other components using the remote control,
as well as a detailed explanation of all remote control operations. Once
you have registered your components with the proper setup codes, you'll
be able to operate both this receiver and your other AV components (TV,
VCR, DVD player, CD player, etc.) using the remote control supplied with
this receiver.
Additional Information
Shows you additional information such as "In case of difficulty"
(troubleshooting) and "Specifications".
Before applying the power
Memory back up function
Please note that the following items will be deleted from the unit's
memory if the power cord is disconnected from the AC outlet for
approximately 1 day.
· Power mode.
· SW RE-MIX ON/OFF.
· Input selector settings.
· Distance setting.
· Picture output.
· Input mode setting.
· Speaker ON/OFF.
· Midnight mode setting.
· Volume level.
· PRO LOGIC II mode setting.
· BASS, TREBLE, INPUT level.
· Broadcast band.
· Dimmer level.
· Frequency setting.
· MD/TAPE settings.
· Preset stations.
· Listen mode setting.
· Tuning mode.
· Speaker settings.
· CINEMA EQ ON/OFF.
· LOUDNESS ON/OFF.
*5228/01-06/EN
14/06/2002, 11:53 AM
4
5 EN
STANDBY
DIMMER
PHONES
CINEMA EQ
LISTEN MODE
INPUT MODE
BAND
AUTO
MEMORY
DSP
DTS
DOLBY DIGITAL
SOUND
SET UP
MULTI CONTROL
INPUT SELECTOR
DOWN
MUTE
UP
VOLUME CONTROL
POWER
SPEAKERS ON / OFF
ON / STANDBY
Names and functions of parts
1 POWER ON/STANDBY
key
%
Use to turn the power ON/STANDBY.
STANDBY indicator
2 DIMMER key
Use to select the REC MODE.
(
Use to adjust the brightness of the display.
¶
3 LISTEN MODE key
¢
Use to select the listening mode.
4 Surround indicators
DSP mode indicator
¢
Lights when the receiver is in the DSP mode.
DTS mode indicator
¢
Lights when the receiver is in the DTS mode.
DOLBY DIGITAL indicator
¢
Lights when the receiver is in the Dolby
Digital mode.
5 SOUND key
Use to adjust the sound quality and the
ambience effects.
6 MULTI CONTROL knob
%
Use to control a variety of settings.
7 INPUT SELECTOR knob
&
Use to select the input sources.
8 VOLUME CONTROL knob
&
9 PHONES jack
*
Use for headphone listening.
0 SPEAKERS ON/OFF keys
&
Use to turn the speakers ON/OFF.
! CINEMA EQ key
*
Use to switch the status of CINEMA EQ.
@ INPUT MODE key
7
Use to switch between full auto, digital and
analog inputs.
# BAND key
)
Use to select the broadcast band.
$ AUTO key
Use to change "TAPE" indication to "MD".
&
Use to select the auto tuning mode.
)
% MEMORY key
)
Use to store radio stations in the preset
memory.
^ SET UP key
%
Use to select the speakers' settings etc.
& MUTE key
*
Use to temporarily mute the sound.
Main Unit
Display
Speaker selection indicators
Input channel indicators
Output channel indicators
Band indicators
STEREO indicator
Frequency display,
Input display,
Preset channel display,
Surround mode display
Speaker indicator
PRO LOGIC
indicator
AUTO DETECT
indicator
DOLBY DIGITAL
indicator
DTS indicator
CLIP indicator
AUTO indicator
MEMO. indicator
ST. indicator
TUNED indicator
MUTE indicator
TONE indicator
LOUDNESS indicator
96kHzfs indicator
DSP indicator
DIGITAL indicator
CINEMA EQ. indicator
6CH INPUT indicator
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the system to back-up the memory. This is called standby mode. Under the
condition, the system can be turned ON by the remote control unit.
*5228/01-06/EN
14/06/2002, 11:53 AM
5