KENWOOD KRF-V8030D - Quick Start Immediate Download

Remote

Control

Quick start guide ................................................ 1

Getting the most from your remote control ................. 3

Remote operation of other components .................... 11

In case of difficulty ............................................ 14

Remote Control Instruction Manual

Preset Remote Control Quick Start Guide

B60-4611-00 (EN)

SHIFT

MACRO

MUSIC

SOUND

BASS BOOST

MUTE

CH.

VOL.

TUNING

BAND

ENTER

AUTO/MONO

F.SHIFT

REC

LEARN

RANDOM

REPEAT

INPUT SEL.

+10

+100

DISPLAY

TV SELECT

SELECT

THEME

AUDIO

FAVORITE

EXIT

INFO.

LAST CHANNEL

OSD

/PAGE

RETURN

/PAGE

DIMMER

TITLE/GUIDE

LISTEN M.

SUB.W.

MOVIE

AV. POWER

SYS. POWER

REMOTE CONTROL UNIT

RC-R0808

This quick start guide explains how to setup the remote

control to operate audio and video components other

than the receiver.

In order to make full use of the functions of the remote

control, be sure to read the section of this manual

entitled "Getting the most from your remote control".

It contains a detailed explanation of how to operate the

remote control and make the necessary settings.

The quick start guide describes the operation of the

following keys:

1 Display operation 1 key

Use this key to go back to the previous display or initial

display.

2 Display operation 2 key

Gets you into and out of the preset code registration

mode.

3 Display

The information for setup is displayed.

4 5/keys

Use these keys to select the source or setup code.

5 MOVIE, MUSIC, and TV keys

Use these keys to select the input you want to register.

6 AV.POWER

key

Once you have entered the setup code for another

component, you can press this key to turn power to that

component on or off. This lets you confirm that you

entered the code properly.

Remote

Control

Automatic input naming

In the initial factory setting, the remote control already has provisional component names registered for each input. Before you register setup codes, pressing

the input keys of the remote control causes the display to change from the factory preset input names of the receiver (VIDEO1, VIDEO2, etc.) to the input

names registered in the remote control (VCR1, VCR2, etc.). Once you have registered the appropriate setup codes for your components, pressing the input

keys of the remote control causes the display to change to the actually connected component names (LD, DVD, etc.) for which you have registered setup

codes.

VCR

Video1:

AV.POWER

Step 1

Press the

display operation 1 key re-

peatedly until "Menu" appears in the dis-

play.

Step 2

Press the

display operation 2 [Menu]

key repeatedly until "01.IR" appears in

the display.

For step 1 through step 9, make sure you

start the next step within 8 seconds of

completing the previous one. If more than

8 seconds elapses between any two steps,

press the display operation key so that

the display appears.

Step 3

Press the

5/ keys to select "01.IR",

then press the

display operation 2

[Enter] key.

Step 4

Press the

5/ keys to select the input

that you want to register, then press the

display operation 2 [Enter] key.

Step 5

Press the

5/ keys to select the com-

ponent that you want to register, then

press the

display operation 2 [Enter]

key.

Step 6

Press the

5/ keys to select the maker

of the component that you want to reg-

ister, then press the

display operation

2 [Enter] key.

Step 7

Press the

5/ keys to select the setup

code.

Step 8

Press the

AV.POWER

key to see if

you can turn the component on and off.

If your component has a mechanical

POWER switch that cannot be operated

by remote control unit, press the

dis-

play operation 2 [Enter] key and dis-

play operation 1 [Home] key, and se-

lect the component by pressing the

MUSIC, MOVIE, or TV key, then press

the PLAY (

<) key or TUNING (2 3) key

to test it.

If the component does not respond when you try to

control it, return to step 7 and enter the next setup

code on the list. Repeat this procedure until you find

the code that matches the component. When the

component does not respond, select "Nothing."

Step 9

Press the

display operation 2 [Enter]

key to store the code.

Repeat steps

3 through 9 to enter the codes for each

component you want to control.

Press the

display operation 1 key repeatedly until "Menu"

appears in the display.

If you accidentally exit the registration mode by pressing the

wrong key, you will not lose any setup codes you have

already saved.

>02.Surround

>01.IR

Back Enter

>Aiwa

>Kenwood

Back Enter

>02:Nothing

>01:0056

Back Enter

>04.Video2

>03.Video1

Back Enter

>02.Surround

>01.IR

Home Enter

>06.Cable

>05.VCR

Back Enter

>02.Surround

>01.IR

Home Enter

Remote

Control

The remote control supplied with this receiver is also

capable of controlling components from a variety of manu-

facturers once you register the appropriate setup codes

into the remote control unit.

Refer to "Remote operation of other components" for de-

tails about the operations available for each component.

How to use the display operation keys

Press the display operation 1 key repeatedly until

"Menu" appears in the display.

Getting the most from your remote control

2Press the display operation 2 [Menu] key repeatedly until

"01.IR" appears in the display.

· At this time all inputs become available regardless of any earlier

registration.

Low battery warning

Replace all four batteries with new ones when you notice a shortening

of the distance from which the remote control will operate. The remote

control is designed to retain setup codes in memory while you change

batteries.

For step

1 through step @, make sure you start the next step

within 8 seconds of completing the previous one. If more than

8 seconds elapses between any two steps, press the display

operation keys so that the display appears.

Registering setup codes for other components

To register the setup code, use the

display operation 1 key, display

operation 2 key, or

5/ keys.

The

display operation 1 key and display operation 2 key work as the

function key displayed in the display above.

The display goes off automatically when you do not operate for more than

8 seconds. In this case, press the

display operation 1 key, display

operation 2 key, or

5/ keys.

When the display goes off

Press the

display operation 1 key repeatedly until "Menu" appears in the

display.

The display returns to the initial display.

When you are confused about what's being displayed

VCR

Video1:

· The setup display appears.

Press the

5/ keys to select "01.IR," then press the

display operation 2 [Enter] key.

· The input selecting display appears.

Press the

5/ keys to select the input that you want to

· Each time you press the

5/ key, the input changes as follows:

01:

CD/DVD

02:

MD/Tape

03:

Video1

04:

Video2

05:

Video3

06:

DVD

07:

TV1

08:

TV2

09:

Cable

10:

Phono

Continued to next page

>06.Cable

>05.VCR

Back Enter

The display operation 1 key

[Back]

Go back to the previous display.

[Home]

Go back to the initial display.

[Clr]

Erase the internal memory.

The display operation 2 key

[Enter]

Enter the selected item.

[Menu]

Display the menu.

[Setup]

Go to the setup display.

[Exit]

Exit from the current operation.

[Sel]

Select the item.

Display operation 1

Display operation 2

Display

Display operation 1

Display operation 2

Display

>04.Video2

>03.Video1

Back Enter

>02.Surround

>01.IR

Home Enter

· Example: To select the source connected the VIDEO1 jack, select

"Video1".

Remote

Control

Getting the most from your remote control

Press the display operation 2 [Enter] key.

· The source selecting display appears.

· When you select "Phono" in step

4, go to step 0.

VCR

Video1:

Press the

5/ keys to select the source you want to

· Each time you press the

5/ key, the input changes as follows:

01:

02:

Tape

03:

04:

CD-R

05:

VCR

06:

Cable

07:

Satellit

08:

09:

10:

DVD

11:

DSS (U.S.A only)

12:

No type

13:

Delete

· Select "No type" when the desired source does not appear in the

display.

· The selected input does not appears when you select "Delete."

Press the display operation 2 [Enter] key.

· The maker selecting display appears.

Press the

5/ keys to select the maker you want to

· Press the

5/ keys until the desired maker appears in the display.

When the desired maker does not appear, select "Nothing."

Press the display operation 2 [Enter] key.

· The setup code selecting display appears.

Press the

5/ keys to select the setup code.

Press the AV.POWER

key, and check to see that the

component you want to control turns on.

If the component does not react, and there is more than one

setup code, enter another setup code and try again.

< or TUNING key can also be used instead of the AV. POWER

key.

· If the component is already on, pressing the

AV. POWER

key

will turn it off.

Repeat steps

3 to @ to register additional components

until all components have been registered.

Press the display operation 2 [Enter] key.

· The display returns to the setup display.

To returns to the initial display, press [Back] repeat-

edly until "Menu" appears in the display.

· Once registered, the display on the receiver shows the component

type instead of the default input name.

Example: if you register a VCR at the VIDEO 1 jacks, "Video1" and

"VCR" appear in the display.

· Any VIDEO or TV (TV1, TV2, CABLE) inputs that have not been

programmed with a setup code or Non-IR code are deleted from the

cyclic list.

Note

Although each setup code is designed to work with a number of different

models, certain codes may not work with some models. (Also, certain

codes may only operate some of the functions available on a given

model.)

Press the

display operation 1 [Back] key repeatedly until the display

you want to re-operate appears.

When you mistake

>06.Cable

>05.VCR

Back Enter

>Aiwa

>Kenwood

Back Enter

>02:Nothing

>01:0056

Back Enter

For Europe and U.K

>Admidral

>Kenwood

Back Enter

For other countries

>02.Surround

>01.IR

Home Enter

Remote

Control

This operation lets you operate the registered components.

KENWOOD audio components with system control turn on and off

automatically with the receiver via the system control connections.

Use the MUSIC, MOVIE, or TV key to select the component

you desire.

· Pressing the

MUSIC or MOVIE key also changes the input selector

on the receiver. If you do not want to change the current input, press

the

SHIFT key before step

Note

Be sure to point the remote control at the remote sensor on the receiver

when you want to operate KENWOOD components connected by

system control cords. Otherwise, point the remote control at the compo-

nent you want to operate.

MOVIE key

1 Video1

2 Video2

3 Video3

4 DVD 6CH

5 AV AUX

MUSIC key

1 CD/DVD

2 TAPE or MD

3 Tuner

4 PHONO

TV key

1 TV1

2 TV2

3 CABLE

Press the AV. POWER

key.

· The selected component turns on or off.

· See "Remote operation of other components" at the end of this

manual for a list of keys available with each component.

RC!

The remote control mode remains in the set at the component

selected in step

1 mode until you select another component.

3 Press the operation keys you desire.

Getting the most from your remote control

VCR

Video1:

Select source

·"Shift" appears in the display.

Press the SHIFT key.

Press the MUSIC, MOVIE, or TV key repeatedly to display

the remote control mode for the component you want to

control.

3Execute the desired operations.

· See "Remote operation of other components" for a list of keys

available with each component.

RC!

The operation mode remains set at the component specified in

step

To return control to the original component, press SHIFT and

then press the MUSIC or MOVIE key to return to the original

control mode.

· Pressing any other keys after the

SHIFT key cancels the shift function

and sends the normal code associated with the respective key.

· The input selector does not change during this operation.

· If you press

MUSIC or MOVIE key more than 3 seconds after

pressing the

SHIFT key, the input selector changes together with the

operation mode.

The component to be controlled

This operation lets you change the remote control operation mode without

changing the input selector.

You may find this useful when you want to control one component while

using another. (For example, if you want to rewind the tape deck while

listening to a CD.)

VCR

Shift

DVD

Shift

· To operate a TV, start form step

Press the MUSIC, MOVIE, or TV key until the desired source

appears.

MUSIC, MOVIE,

SHIFT

During opration, make sure you start the next step within

8seconds of completing the previous one. If more than 8

seconds elapses between any two steps, press the display

operation key so that the display appears.

During opration, make sure you start the next step within 8

seconds of completing the previous one. If more than 8

seconds elapses between any two steps, press the display

operation key so that the display appears.

AV.POWER I /

MUSIC, MOVIE,

SHIFT

· You cannot select the source that is not registered.

Operating other components

Changing (confirming) the operation mode