KENWOOD KFC-W3000LS - Owner's Manual Immediate Download

KFC-W3000L

KFC-W3000LS

ILLUMINATED SUBWOOFER

INSTRUCTION MANUAL

HAUT-PARLEUR DE GRAVES LUMINEUX

MODE D'EMPLOI

BELEUCHTETER SUBWOOFER

BEDIENUNGSANLEITUNG

SUBWOOFER MET VERLICHTING

GEBRUIKSAANWIJZING

SUBWOOFER ILLUMINATO

ISTRUZIONI PER L'USO

ALTAVOZ DE SUBGRAVES ILUMINADO

MANUAL DE INSTRUCCIONES

HCTPKC O KCATA

ENGLISH

ANÇ

AIS

DEUT

SCH

NEDERL

ANDS

ALIANO

ESP

AÑOL

B61-1329_EN.indd 1

08.3.13 5:13:42 PM

ENGLISH

2 English

IMPORTANT SAFETY INSTRUCTIONS

Caution: Read this page carefully to ensure safe operation.

WARNING

· Before mounting or wiring etc., be sure to remove the wire from

the battery minus terminal.

(Not doing so can cause shorts or fires.)

· To prevent a short circuit, never put or leave any metallic objects

(such as coins or metal tools) inside the unit.

· In the event the unit generates smoke or abnormal smell, im-

mediately switch the power OFF. After this, please contact your

dealer or nearest service station as soon as possible.

POWER OFF!

· Connect the illumination lamp-equipped speakers to DC 12V,

negative ground.

· Do not attempt to open or modify the unit, for this could cause

fire hazard or malfunction.

· After taking the unit out of the polyethylene bag, be sure to dis-

pose of the polyethylene bag out of the reach of children. Oth-

erwise, they may play with the bag, which could cause hazard of

suffocation.

CAUTION

· Installation and wiring of the product requires expert skill and

experience. To ensure safety, be sure to have your dealer or spe-

cialist perform the installation and wiring.

· Do not install the speaker in a spot exposed to direct sunlight or

excessive heat or humidity.

· Do not install the speakers in locations which may be subject to

water or moisture.

· Do not install the speakers in unstable locations or locations

subject to dust.

· If the fuse blows, after checking to see if the wiring cord has

shorted, be sure to replace with the stipulated size (amperage)

fuse as displayed on the fuse box.

(Using fuses other than the stipulated size can cause fires.)

Check the display!

To replace the fuse, refer to the vehicle instruction manual.

· To prevent a short circuit when replacing a fuse, disconnect the

wiring harness at first.

· Do not use gasoline, naphtha, or any type of solvent to clean the

speaker. Clean by wiping with a soft, dry cloth.

· Connect the speaker wires to appropriate speaker connectors

separately. Sharing the negative wire of the speaker or ground-

ing speaker wires to the metal body of the car can cause this

unit to fail.

· When making a hole under a seat, inside the trunk, or some-

where else in the vehicle, check that there is nothing hazardous

on the opposite side such as a gasoline tank, brake pipe; or wir-

ing harness, and be careful not to cause scratches or other dam-

age.

· For ground wire mounting, do not fasten the wire to an airbag,

steering or brake line system or other critical safety unit bolts or

nut.

(Can cause accidents.)

· When mounting, be sure to mount in a place that will not inter-

fere with driving or be dangerous to passengers during sudden

braking etc.

(Cause of injury or accidents.)

· After installing the unit, check to make sure that electrical equip-

ment such as the brake lamps, turn signal lamps and windshield

wipers operate normally.

· The driver should always stop the vehicle in a safe place before

performing the following action.

Remote control operation

· Do not use the product for purposes other than on-board

mounting.

Information on Disposal of Old Electrical

and Electronic Equipment (applicable for EU

countries that have adopted separate waste

collection systems)

Products with the symbol (crossed-out wheeled

bin) cannot be disposed as household waste.

Old electrical and electronic equipment should be

recycled at a facility capable of handling these items

and their waste by products.

Contact your local authority for details in locating a

recycle facility nearest to you.

Proper recycling and waste disposal will help conserve resourc-

es whilst preventing detrimental effects on our health and the

environment.

Declaration of Conformity with

regard to the EMC Directive

2004/108/EC

Manufacturer:

Kenwood Corporation

2967-3 Ishikawa-machi, Hachioji-shi, Tokyo,

192-8525 Japan

EU Representative's:

Kenwood Electronics Europe BV

Amsterdamseweg 37, 1422 AC UITHOORN,

The Netherlands

FCC WARNING

This equipment may generate or use radio frequency energy.

Changes or modifications to this equipment may cause harmful

interference unless the modifications are expressly approved in the

instruction manual. The user could lose the authority to operate

this equipment if an unauthorized change or modification is made.

FCC NOTE

This equipment has been tested and found to comply with the lim-

its for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

may cause harmful interference to radio communications, if it is not

installed and used in accordance with the instructions. However,

there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

· Reorient or relocate the receiving antenna.

· Increase the separation between the equipment and receiver.

· Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

· Consult the dealer or an experienced radio/TV technician for

help.

For Canada

NOTICE: This Class B digital apparatus complies with Canadian

ICES-003.

B61-1329_EN.indd 2

08.3.13 5:13:43 PM

English

ENGLISH

Parts included

No.

Part Name

Outside Shape

Quantity

No.

Part Name

Outside Shape

Quantity

KFC-W3000L KFC-W3000LS

1 Control box

5 Cord bush

Remote control

(Cord length:

6 m)

Screw

(ø 4 x 35)

DC cable

(Cable length:

1.5 m)

Screw

(ø 4 x 16)

Link cable

(Cable length:

1 m)

8 Cushion

B61-1329_EN.indd 3

08.3.14 9:04:55 AM

ENGLISH

4 English

Caution:

Before wiring, be sure to remove the wire from the negative terminal of the battery. After completing all wiring, check the correct wirings

again. After checking, connect the wire from the negative terminal of the battery.

Connection

Connecting the remote control unit

2 Remote control

Note:

The illumination function cannot be used when the Remote control

2 is not connected. Be sure to connect the Remote control 2 to the

Control box

1 Control box

Connect the Remote control

2 to the REMOTE termi-

nal of the Control box

Woofer unit

(KFC-W3000L)

1 Control box

4 Link cable

3 DC cable

BATT: Yellow

GND: Black

P.CONT: Blue/White

Fuse (2A)

Speaker cord (Commercially available)

Amplifier

Connect with the lock part of

LINK jack facing down.

Center unit

Battery

If there is no

power control

terminal in the am-

plifier, connect the

blue/white wire to

the accessory line

(ignition key

switch ACC posi-

tion line).

Amplifier is not included in this product.

Please use a commercially available amplifier.

1 Connect the POWER jack of the Control box 1

and amplifier using DC cable

(If there is no power control terminal in the ampli-

fier, connect to the accessory (ACC) line.)

2 Connect the LINK jack of the Control box 1 and

LINK IN jack of the Woofer unit using Link cable

(A modular cable (commercially available) cannot

be used.)

3 Connect the amplifier and the Woofer unit with

speaker cords.

Notes:

· The illumination function cannot be used if the Link cable

4 is

connected erroneously to the LINK OUT jack of the Woofer unit.

Be sure to connect the Link cable

4 to the LINK IN jack.

· Do not plug or unplug the connection cables without switching

the power off. Otherwise, malfunction may result.

B61-1329_EN.indd 4

08.3.13 5:13:44 PM

English

ENGLISH

Connecting KFC-W3000L and KFC-W3000LS (KFC-W3000LS user only)

Notes:

· The illumination function of the KFC-W3000LS is enabled only

when it is connected to the KFC-W3000L through the Link cable

The illumination function cannot be used when the KFC-

W3000LS is not connected to the KFC-W3000L.

· The maximum number of connected KFC-W3000LS units is 3

(the maximum total number of Woofer units including the KFC-

W3000L is 4).

· The illumination function cannot be used if the Link cable

4 is

connected erroneously to the LINK OUT jack of the Woofer unit

2 (KFC-W3000LS). Be sure to connect the Link cable 4 to the

LINK IN jack.

· The illumination is synchronized with the music signal input at

the speaker terminal of the Woofer unit

1 (KFC-W3000L).

The illuminations of the connected Woofer units

2, 3, 4 (KFC-

W3000LS) light according to the Woofer unit

1 (KFC-W3000L).

Note that they are not synchronized with the signals input to

them.

· Do not plug or unplug the connection cables without switching

the power off. Otherwise, malfunction may result.

Woofer unit

(KFC-W3000L)

Woofer unit

(KFC-W3000LS)

Amplifier

1 Control box

Woofer unit

4 Link cable

1 Connect the LINK OUT jack of the Woofer unit 1

(KFC-W3000L) and LINK IN jack of the Woofer unit

2 (KFC-W3000LS) using Link cable 4.

2 Connect the amplifier and the Woofer unit with

speaker cords.

Fuse exchange

Exchange with the specified capacity fuse.

Removal

Insertion

Fuse

Cover

Fuse holder

Replacement fuse 2A

1 Open the cover.

2 Grasp with pliers and pull up.

1 Insert the fuse gently into the fuse holder and

push in all the way with your finger or tool.

2 Close the cover.

Caution: Be sure to replace with same capacity (amperage) as displayed on the fuse. This product is 2A.

B61-1329_EN.indd 5

08.3.13 5:13:46 PM