KENWOOD KDC-XBT8013UL - Owner's Manual Immediate Download

CD-RECEIVER

KDC-XBT8013U

KDC-XBT8013UL

KDC-X7013U

KDC-X7013UL

INSTRUCTION MANUAL

B64-4418-00_00_en.indd 1

09.1.13 10:34:11 AM

2 | KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL

Contents

Before use

Basic Operation

Hands-free phoning

Function Control

Display Settings

Display Type Selection

Text Display Selection

Illumination Color Selection

Auxiliary Input Display Setting

Music disc/Audio file Operation

Music Search

Music Search for iPod

Searching for Music by Initial

All Random

iPod Control by Hand Mode

Direct Music Search

Direct Disc Search

Basic Operation of Disc Changer (Optional)

Tuner Operation

Auto Memory Entry

Station Preset Memory

Preset Tuning

Direct Access Tuning

Frequency Step Setting

Operation of hands-free phoning

Before Use

Receiving a call

During a call

Call waiting

Other functions

Making a call

Dial a number

Speed dialing (Preset dial)

Calling a number in the Phone Book

Calling a number in the call log

Make a voice dialing call

Registering to the Preset Dial Number List

Display of phone number type (category)

Bluetooth Audio Operation

Before Use

Basic Operation

Other Functions

Activating Security Code

Deactivating Security Code

Manual Clock Adjustment

Date Adjustment

Date Format Selection

AMP Control

Demonstration mode setting

Theft Deterrent Faceplate

Audio Adjustments

Audio Control

Audio Setup

Sound Setup

Cabin selection

Speaker setting

DTA (Digital Time Alignment) setting

X'Over setting

Preset Equalizer curve select

Manual Equalizer Control

Preset position selection

Manual position setting

Audio Preset Memory

Audio Preset Recall

Favorite Control

Favorite Preset Memory

Favorite Preset Recall

Favorite Preset Memory Delete

Favorite Name Setting

Bluetooth Setup

Registering Bluetooth device

Registering Special Bluetooth device

Registering PIN Code

Downloading the Phone Book

Selecting the Bluetooth device You Wish to Connect

Deleting a Registered Bluetooth device

Displaying the Firmware Version

Adding a voice dialing command

Setting a Voice Command for Category

SMS (Short Message Service)

Downloading the SMS

TV control (Optional)

Basic Operation

Preset Memory

Preset Tuning

Direct TV Tuning

Basic Operations of remote control

Appendix

Accessories/ Installation Procedure

Connecting Wires to Terminals

Installation/Removing the Unit

Troubleshooting Guide

Specifications

B64-4418-00_00_en.indd 2

09.1.13 10:34:12 AM

English

Before use

2WARNING

To prevent injury or fire, take the following

precautions:

· To prevent a short circuit, never put or leave any

metallic objects (such as coins or metal tools) inside

the unit.

Do not use this unit before canceling

Demonstration mode!

This unit is initially set on the Demonstration mode.

When using this unit for the first time, cancel the

<Demonstration mode setting> (page 23).

How to reset your unit

· If this unit or the connected unit (disc auto changer,

etc.) fails to operate properly, press the Reset button.

The unit returns to factory settings when the Reset

button is pressed.

Reset button

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a

dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain off with

a cloth moistened with neutral cleaner, then wipe it

again with a clean soft dry cloth.

· Applying spray cleaner directly to the unit may affect its

mechanical parts. Wiping the faceplate with a hard cloth or

using a volatile liquid such as thinner or alcohol may scratch

the surface or erases characters.

Cleaning the Faceplate Terminals

If the terminals on the unit or faceplate get dirty, wipe

them with a clean soft dry cloth.

Lens Fogging

When you turn on the car heater in cold weather,

dew or condensation may form on the lens in the

CD player of the unit. Called lens fogging, this

condensation on the lens may not allow CDs to play.

In such a situation, remove the disc and wait for the

condensation to evaporate. If the unit still does not

operate normally after a while, consult your Kenwood

dealer.

· If you experience problems during installation,

consult your Kenwood dealer.

· When you purchase optional accessories, check with

your Kenwood dealer to make sure that they work

with your model and in your area.

· Characters that conform to GB2312 or ISO 8859-1

can be displayed. Refer to "MENU" > "Chinese" of

<Function Control> (page 6).

· Characters that conform to ISO 8859-1 ("English"),

Windows CP 1256 ("Arabic"/ "Persian") and Windows

CP 874 ("Thai") can be displayed. Refer to "MENU" >

"Language" of <Function Control> (page 6).

· In this document, the description indicator will light

means a status is displayed. Refer to <Display Type

Selection> (page 10) for the details of the status

display.

· The illustrations of the display and the panel

appearing in this manual are examples used to

explain more clearly how the controls are used.

Therefore, what appears on the display in the

illustrations may differ from what appears on the

display on the actual equipment, and some of the

illustrations on the display may be inapplicable.

Handling CDs

· Do not touch the recording surface of the CD.

· Do not stick tape etc. on the CD, or use a CD with

tape stuck on it.

· Do not use disc type accessories.

· Clean from the center of the disc and move

outward.

· When removing CDs from this unit, pull them out

horizontally.

· If the CD center hole or outside rim has burrs,

use the CD only after removing the burrs with a

ballpoint pen etc.

CDs that cannot be used

· CDs that are not round cannot be used.

· CDs with coloring on the recording surface or CDs

that are dirty cannot be used.

· This unit can only play the CDs with

This unit may not correctly play discs which do not

have the mark.

· You cannot play a CD-R or CD-RW that has not been

finalized. (For the finalization process refer to your

CD-R/CD-RW writing software, and your CD-R/CD-

RW recorder instruction manual.)

B64-4418-00_00_en.indd 3

09.1.13 10:34:12 AM

AUX

[AUD]

[FNC]

[SRC]

[

]

[AUTO]

[

]

4 | KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL

General functions

Power/Source Select button: [SRC]

Turns on the power.

When the power is ON, select a source.

SRC Select mode 1: Press the [SRC] button and then

turn the Control knob or push it toward up or down.

To determine the selected source, press the Control

knob.

SRC Select mode 2: Pressing this button each time

switches between sources.

Tuner ("TUNER") , USB or iPod ("USB" or "iPod"),

CD ("CD") , Auxiliary input ("AUX"), and Standby

("STANDBY")

Press at least 1 second to turn off the power.

· The SRC Select mode can be set in "MENU"

> "SRC Select" of

<Function Control> (page 6).

· Auxiliary input source is initially set to "OFF". Set "Built in

AUX" described in <Function Control> (page 6) to "ON".

: Select "MENU" > "Built in AUX"

· When an optional accessory is connected, the source name

for each device appears.

· When connection of the iPod is recognized, the source

display changes from "USB" to "iPod".

· USB (iPod) source is recognized as CD source on the

connected unit.

Volume control: [AUD] knob

Turn the knob to adjust the volume.

Subwoofer output: Control knob

Switches between ON ("SUBWOOFER ON") and OFF

("SUBWOOFER OFF") each time pushing toward down

for at least 2 seconds.

Auxiliary input

Connect a portable audio device with mini-plug

cable (3.5 ø).

· Use the mini-plug cable which is stereo type and does not

have any resistance.

· The auxiliary input requires the setting made in "MENU"

"AUX" of <Function Control> (page 6).

Text/Title scroll: Control knob

Scrolls the CD and audio file text display when

pushing toward up for at least 2 seconds.

Muting volume upon reception of phone call

When there is a call, "CALL" is displayed and the audio

system is paused.

When the call ends, "CALL" disappears and the audio

system comes back on.

The audio system comes back on when [SRC] is

pressed during a call.

· To use the TEL Mute feature, you need to hook up the MUTE

wire to your telephone using a commercial telephone

accessory. Refer to <Connecting Wires to Terminals> (page

45).

Function Control: [FNC]

Pressing this button allows you to set various

functions using the Control knob. Refer to <Function

Control> (page 6).

Category Function of setup item

Allows you to set up the environment.

SETUP

Allows you to set up the display and color.

SOUND

Allows you to set up the sound environment.

Allows you to set up the Bluetooth function.

Allows you to set up the

Basic Operation

Release

Auxiliary

input

Microphone

USB Terminal

Control

knob

B64-4418-00_00_en.indd 4

09.1.13 10:34:12 AM

English

Favorite Control: Control knob

You can recall the various registered functions by

turning the Control knob.

For example, you can recall and playback the playlist

in iPod while listening to Tuner.

Refer to <Favorite Control> (page 30).

Tuner functions

FM band: Control knob

Switches between FM1, FM2, and FM3 each time

pushing toward up.

AM band: Control knob

Switches to AM when pushing toward down.

Tuning: Control knob

Changes the frequency when pushing toward left or

right.

· During reception of stereo stations the "ST" indicator is ON.

Tuning mode select: [AUTO]

For KDC-X7013U/ KDC-X7013UL:

Switches as follows each time this button is pressed.

For KDC-XBT8013U/ KDC-XBT8013UL: Switches as

follows each time this button is pressed for at least

1 second.

Tuning mode

Display

Operation

Auto seek

"Seek Mode :

Auto1"

Automatic search for a station.

Preset station seek "Seek Mode :

Auto2"

Search in order of the stations in

the Preset memory.

Manual

"Seek Mode :

Manual"

Normal manual tuning control.

Disc & Audio file play functions

Drop open the faceplate: Release

· Push the faceplate on the left side, and return it to its

former position.

Disc play: Disc slot

Starts playing when a disc is inserted.

When a CD is inserted, the "CD-IN" indicator is ON.

· 3 inch (8 cm) CD cannot be used. Attempt to insert using

an adapter can cause malfunction.

Disc ejection: [

· You can eject the disc for 10 minutes after switching off the

engine.

USB device/iPod play: USB Terminal

Connecting a USB device starts playback.

· For the playable audio file, media, and devices, refer to

<About Audio file> (page 40).

Pause and play: Control knob

Switches between pause and play each time this

button is pressed.

USB device removing: [

Press this button for 2 seconds or longer to select the

remove mode, and the remove the USB device.

During the remove mode, "USB REMOVE" is displayed.

Music search: Control knob

Changes the music when pushing toward left or right.

Fast reverses or forwards the music while keeping

pushing toward left or right. (No sound is output

while playing audio file.)

Folder search: Control knob

Changes the folder containing the audio file when

pushing toward up or down.

· For the operation on iPod, enter <Music Search for iPod>

(page 12) is first to enter the search mode.

Search mode: [

]

After pressing [SEARCH] button, you can quickly

search songs with the Control knob. See <Music

Search> (page 12) for details.

Hands-free phoning

Microphone:

(Accessory of KDC-XBT8013U/ KDC-XBT8013UL)

The microphone for the hands free phone is supplied.

When your voice cannot be recognized due to the

low microphone volume or noises in the vehicle,

adjust the microphone settings by selecting "MENU"

>"Mic Gain" of <Function Control> and "MENU" >"NR

Level" of <Function Control> (page 6).

B64-4418-00_00_en.indd 5

09.1.13 10:34:13 AM