KENWOOD KDC-W5641U - Owner's Manual Immediate Download

CD-RECEIVER

KDC-W5641U

KDC-W5541U

KDC-W5141U

KDC-W5041U

KDC-W4141

KDC-W4041

INSTRUCTION MANUAL

2 | KDC-W5641U/KDC-W5541U/KDC-W5141U/KDC-W5041U/KDC-W4141/KDC-W4041

Contents

Before use

Basic Operation

General functions

Tuner functions

Disc & Audio file play functions

General Operation

Audio Control

Audio Setup

Speaker Setting

Display Switching

Tuner Operation

PTY (Program Type)

Program Type preset

Changing Language for PTY Function

Direct Access Tuning

Music disc/Audio file Operation

Play Functions of Disc Changer

Direct Music Search

Direct Disc Search

List Select

iPod Select

Track Select

Menu Operation

Menu System

Security Code

Manual Clock Adjustment

Auxiliary Input Display Setting

Demonstration mode Setting

Basic Operations of remote control 14

Appendix

Accessories/ Installation Procedure 18

Connecting Wires to Terminals

Installation/Removing the Unit

Troubleshooting Guide

Specifications

iPod is a trademark of Apple Inc., registered in the U.S.

and other countries.

The "AAC" logo is trademark of Dolby Laboratories.

Playing AAC, MP3, and WMA data

This document refers to AAC, MP3, and WMA

data stored in iPod, USB device, and CD-R/RW as

"audio files." Refer to the section on "Audio Files" to

control these data. See <About Audio file> (page

15) for details.

Panel illustrations used in this

document

The control panel for KDC-W5641U is used to

describe operations in this document.

English

Before use

2WARNING

To prevent injury or fire, take the following

precautions:

· To prevent a short circuit, never put or leave any

metallic objects (such as coins or metal tools) inside

the unit.

Before using this unit for the first time

This unit is initially set on the Demonstration mode.

When using this unit for the first time, cancel the

<Demonstration mode Setting> (page 13).

How to reset your unit

· If this unit or the connected unit (disc auto changer,

etc.) fails to operate properly, press the Reset button.

The unit returns to factory settings when the Reset

button is pressed.

Reset button

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a

dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain off with

a cloth moistened with neutral cleaner, then wipe it

again with a clean soft dry cloth.

· Applying spray cleaner directly to the unit may affect its

mechanical parts. Wiping the faceplate with a hard cloth or

using a volatile liquid such as thinner or alcohol may scratch

the surface or erases characters.

Cleaning the Faceplate Terminals

If the terminals on the unit or faceplate get dirty, wipe

them with a clean soft dry cloth.

Lens Fogging

When you turn on the car heater in cold weather,

dew or condensation may form on the lens in the

CD player of the unit. Called lens fogging, this

condensation on the lens may not allow CDs to play.

In such a situation, remove the disc and wait for the

condensation to evaporate. If the unit still does not

operate normally after a while, consult your Kenwood

dealer.

· If you experience problems during installation,

consult your Kenwood dealer.

· When you purchase optional accessories, check with

your Kenwood dealer to make sure that they work

with your model and in your area.

· The characters which can be displayed by this unit

are A-Z 0-9 @ " ` ` % & * + = , . / \ < > [ ] ( ) : ; ^ - { } |

~ .

· The RDS feature won't work where the service is not

supported by any broadcasting station.

· The illustrations of the display and the panel

appearing in this manual are examples used to

explain more clearly how the controls are used.

Therefore, what appears on the display in the

illustrations may differ from what appears on the

display on the actual equipment, and some of the

illustrations on the display may be inapplicable.

Handling CDs

· Do not touch the recording surface of the CD.

· Do not stick tape etc. on the CD, or use a CD with

tape stuck on it.

· Do not use disc type accessories.

· Clean from the center of the disc and move

outward.

· When removing CDs from this unit, pull them out

horizontally.

· If the CD center hole or outside rim has burrs,

use the CD only after removing the burrs with a

ballpoint pen etc.

CDs that cannot be used

· CDs that are not round cannot be used.

· CDs with coloring on the recording surface or CDs

that are dirty cannot be used.

· This unit can only play the CDs with

This unit may not correctly play discs which do not

have the mark.

· You cannot play a CD-R or CD-RW that has not been

finalized. (For the finalization process refer to your

CD-R/CD-RW writing software, and your CD-R/CD-

RW recorder instruction manual.)

4 | KDC-W5641U/KDC-W5541U/KDC-W5141U/KDC-W5041U/KDC-W4141/KDC-W4041

General functions

Power/Source select button

[SRC]

Turns on the power.

When the power is on, the source switches between

Tuner ("TUNER") , USB or iPod ("USB" or "iPod"),

CD ("CD") , Auxiliary input ("AUX"), and Standby

("STANDBY") each time this button is pressed.

Press at least 1 second to turn off the power.

· When the power is ON, the <Security Code> (page 12) is

displayed as "CODE ON" or "CODE OFF".

· For whether USB devices and iPod can be connected, refer

to <About Audio file> (page 15).

· When an optional accessory is connected, the source name

for each device appears.

· This unit automatically turns full power OFF after 20

minutes lapses in Standby mode in order to save the

vehicle's battery. The time until full power OFF can be set in

"POWER OFF" of <Menu System> (page 11).

· When connection of the iPod is recognized, the source

display changes from "USB" to "iPod".

Volume control

Control knob

Turn the knob to adjust the volume.

Faceplate release

Release

Releases the faceplate lock so that it can be removed.

Refer to the following diagram when reattaching the

faceplate.

· The faceplate is a precision piece of equipment and can be

damaged by shocks or jolts.

· Keep the faceplate in its faceplate case while detached.

· Do not place the faceplate (and the faceplate case) in areas

exposed to direct sunlight, excessive heat or humidity. Also

avoid places with too much dust or the possibility of water

splashing.

· To prevent deterioration, do not touch the terminals of the

unit or faceplate with your fingers.

Auxiliary input

Used to connect a portable audio device with mini-

plug cable (3.5 ø).

· Use the mini-plug cable (stereo) which does not have any

resistance.

Muting volume upon reception of phone call

When there is a call, "CALL" is displayed and the audio

system is paused.

When the call ends, "CALL" disappears and the audio

system comes back on.

The audio system comes back on when [SRC] is

pressed during a call.

Subwoofer output

Control knob

Switches between ON ("SUBWOOFER ON") and OFF

("SUBWOOFER OFF") each time pushing toward down

for at least 2 seconds.

Text/Title scroll

Control knob

Scrolls the CD, audio file, and Radio text display when

pushing toward up for at least 2 seconds.

Tuner functions

Band select

Control knob

Switches between FM1, FM2, and FM3 each time

pushing toward up.

Switches to AM when pushing toward down.

Release

Display

[SRC]

[M.JOG]

[1] [2] [3]

[4]

[5] [6]

USB Terminal

Control knob

[TI]

[

]

Disc slot

Auxiliary input

[ ]

Basic Operation

Release

Display

Disc slot

Auxiliary input

Control knob

USB Terminal

English

Tuning

Control knob

Changes the frequency when pushing toward left or

right.

· During reception of stereo stations the "ST" indicator is ON.

Traffic information

[TI]

Turns ON or OFF the Traffic Information function.

When the function is turned ON, "TI" indicator is ON.

If traffic bulletin starts when the function is ON,

"TRAFFIC INFO" is displayed and traffic information is

received.

· If the volume is adjusted during reception of traffic

information, the adjusted volume is memorized

automatically. The memorized volume will be applied next

time the Traffic Information function is turned ON.

Preset memory

[1] - [6]

Memorizes the station selected when pressing for at

least 2 seconds.

Auto memory entry

[TI]

Memorizes six stations with good reception

automatically when pressed for at least 2 seconds.

Preset tuning

[1] - [6]

Recalls the memorized station.

Disc & Audio file play functions

Disc play

Disc slot

Starts playing when a disc is inserted.

When a CD is inserted, the "IN" indicator is ON.

· 3 inch (8 cm) CD cannot be used. Attempt to insert using

an adapter can cause malfunction.

USB device play (KDC-W5641U/W5541U/W5141U/

W5041U)

USB Terminal

Used to connect the USB device to the USB cable

(optional accessory) which is connected to the USB

terminal.

When the USB device is connected, the "USB"

indicator is ON.

· For the playable audio file, media, and devices, refer to

<About Audio file> (page 15).

Pause and play

[

38]

Switches between pause and play each time this

button is pressed.

Disc ejection

[

· You can eject the disc for 10 minutes after switching off the

engine.

USB device removing

[

Press this button for 2 seconds or longer to select

the remove mode, and the remove the USB device.

During the remove mode, "USB REMOVE" is displayed.

Music search

Control knob

Changes the music when pushing toward left or right.

Fast reverses or forwards the music while keeping

pushing toward left or right. (No sound is output

while playing audio file.)

Folder search

Control knob

Changes the folder containing the audio file when

pushing toward up or down.

Select mode

[M.JOG]

After pressing this button, you can quickly search

songs with the control knob. See <List Select> (page

10), <iPod Select> (page 10) for details.

Track/ File/ Folder repeat play

[4]

Switches between Track Repeat ("TRAC REP ON") and

OFF ("REP OFF") when pressed while playing a CD.

Switches between File Repeat ("FILE REP ON"), Folder

Repeat ("FOLD REP ON"), and OFF ("REP OFF") when

pressed while playing an audio file.

· The folder repeat operation cannot be performed while

iPod is playing.

Scan play

[2]

Successively plays the intro of the music in the disc or

folder.

When Scan Play is turned on, "TRAC SCAN ON"/ "FILE

SCAN ON" is displayed.

· The Scan paly operation cannot be performed while iPod is

playing.

Random play

[3]

Randomly plays the music in the disc or folder.

When Random Play is turned on, "DISC RDM ON"/

"FOLD RDM ON" is displayed.

: Indicates the button etc. to operate.