KENWOOD KDC-W534 - Owner's Manual Immediate Download

CD-RECEIVER

KDC-W534

KDC-W534Y

INSTRUCTION MANUAL

2 | English

Contents

Safety precautions

Notes

About AAC, MP3 and WMA

About CDs

General features

Power

Selecting the Source

Volume

Attenuator

System Q

Audio Control

Audio Setup

Speaker Setting

Switching Display

Dimmer Control

Theft Deterrent Faceplate

TEL Mute

Tuner features

Tuning

Tuning Mode (KDC-W534Y)

Station Preset Memory

Auto Memory Entry

Preset Tuning

RDS features

Traffic Information

Radio Text Scroll

PTY (Program Type)

Program Type preset

Changing Language for PTY Function

CD player features

Playing CD & Audio file

Fast Forwarding and Reversing

Track/File Search

Folder Search

Track/File/Folder Repeat

Scan Play

Random Play

Folder Select

Text/Title Scroll

Menu system

Menu System

Touch Sensor Tone

Manual Clock Adjustment

Synchronize Clock

DSI (Disabled System Indicator)

Selectable Illumination

Display Illumination Control

Supreme Setting

News Bulletin with Timeout Setting

Local Seek

Tuning Mode (KDC-W534)

AF (Alternative Frequency)

Restricting RDS Region (Region Restrict

Function)

Auto TP Seek

Monaural Reception

Text Scroll

Power OFF Timer

CD Read Setting

Demonstration mode Setting

Accessories/ Installation Procedure 26

Connecting Wires to Terminals

Installation

Removing the Unit

Troubleshooting Guide

Specifications

English |

Safety precautions

Do Not Load 8 cm (3 in.) CDs in the CD

slot

If you try to load a 8 cm (3 in.) CD with its adapter

into the unit, the adapter might separate from the

CD and damage the unit.

Lens Fogging

When you turn on the car heater in cold weather,

dew or condensation may form on the lens in the

CD player of the unit. Called lens fogging, this

condesnation on the lens may not allow CDs to

play. In such a situation, remove the disc and wait

for the condensation to evaporate. If the unit still

does not operate normally after a while, consult

your Kenwood dealer.

2WARNING

To prevent injury or fire, take the

following precautions:

· To prevent a short circuit, never put or leave any

metallic objects (such as coins or metal tools)

inside the unit.

· Mounting and wiring this product requires

skills and experience. For safety's sake, leave the

mounting and wiring work to professionals.

Attach the panel while you are on the

vehicle

The panel lock arm appears when the panel is

removed. Therefore, the panel must be attached

while the electrical system of the car is operating.

2CAUTION

To prevent damage to the machine, take

the following precautions:

· Make sure to ground the unit to a negative 12V

DC power supply.

· Do not install the unit in a spot exposed to direct

sunlight or excessive heat or humidity. Also avoid

places with too much dust or the possibility of

water splashing.

· Do not place the faceplate (and the faceplate

case) in areas exposed to direct sunlight, excessive

heat or humidity. Also avoid places with too much

dust or the possibility of water splashing.

· To prevent deterioration, do not touch the

terminals of the unit or faceplate with your

fingers.

· Do not subject the faceplate to excessive shock,

as it is a piece of precision equipment.

· When replacing a fuse, only use a new fuse with

the prescribed rating. Using a fuse with the wrong

rating may cause your unit to malfunction.

· Do not apply excessive force to the open

faceplate or place objects on it. Doing so will

cause damage or breakdown.

· Do not use your own screws. Use only the screws

provided. If you use the wrong screws, you could

damage the unit.

The "AAC" logo is trademark of Dolby

Laboratories.

4 | English

Notes

· If you experience problems during installation,

consult your Kenwood dealer.

· When you purchase optional accessories, check

with your Kenwood dealer to make sure that they

work with your model and in your area.

· If the unit fails to operate properly, press the Reset

button. The unit returns to factory settings when

the Reset button is pressed.

· The characters which can be displayed by this

unit are A-Z 0-9 @ " ` ` % & * + = , . / \ < > [ ] ( ) : ;

^ - { } | ~ .

· The RDS feature won't work where the service is

not supported by any broadcasting station.

· The illustrations of the display and the panel

appearing in this manual are examples used to

explain more clearly how the controls are used.

Therefore, what appears on the display in the

illustrations may differ from what appears on the

display on the actual equipment, and some of the

illustrations on the display may be inapplicable.

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a

dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain off

with a cloth moistened with neutral cleaner, then

wipe it again with a clean soft dry cloth.

· Applying spray cleaner directly to the unit may affect its

mechanical parts. Wiping the faceplate with a hard cloth

or using a volatile liquid such as thinner or alcohol may

scratch the surface or erases characters.

Cleaning the Faceplate Terminals

If the terminals on the unit or faceplate get dirty,

wipe them with a clean soft dry cloth.

Before using this unit for the first time

This unit is initially set on the Demonstration mode.

When using this unit for the first time, cancel the

<Demonstration mode Setting> (page 25).

Reset button

English |

This Product is not installed by the manufacturer

of a vehicle on the production line, nor by the

professional importer of a vehicle into an EU

Member State.

Information on Disposal of Old Electrical

and Electronic Equipment (applicable for

EU countries that have adopted separate

waste collection systems)

Products with the symbol (crossed-out

wheeled bin) cannot be disposed as

household waste.

Old electrical and electronic equipment

should be recycled at a facility capable

of handling these items and their

waste byproducts. Contact your local

authority for details in locating a

recycle facility nearest to you. Proper

recycling and waste disposal will help

conserve resources whilst preventing

detrimental effects on our health and the

environment.

The marking of products using lasers

(Except for some areas)

The label is attached to the chassis/case and says

that the component uses laser beams that have

been classified as Class 1. It means that the unit

is utilizing laser beams that are of a weaker class.

There is no danger of hazardous radiation outside

the unit.