KENWOOD DPFJ6030 - Owner's Manual Immediate Download

MULTIPLE COMPACT DISC PLAYER

DPF-J6030

CD-4700M

CD-4260M

CD-425M

INSTRUCTION MANUAL

KENWOOD CORPORATION

B60-4454-08 00 (K, P, T)

9909

This unit is designed for home use only. If the unit is

used in a location other than at home, such as in a

shop (for commercial use), in a car or in a ship, etc.,

and is damaged, a service fee may be charged even

during the warranty period.

This instruction manual is used to describe multiple

models listed above.

Model availability and features (functions) may differ

depending on the country and sales area.

TEXT

DIGITAL AUDIO

COMPACT

Your New Kenwood 200-Disc Mega-Changer

Chapter

Units are designed for operation as follows.

U.S.A. and Canada ................................................................... AC 120 V only

Europe and U.K. ........................................................................ AC 230 V only

For the United Kingdom

Factory fitted moulded mains plug

1.The mains plug contains a fuse. For replacement, use only a 13-

Amp ASTA-approved (BS1362) fuse.

2.The fuse cover must be refitted when replacing the fuse in the

moulded plug.

3.Do not cut off the mains plug from this equipment. If the plug

fitted is not suitable for the power points in your home or the cable

is too short to reach a power point, then obtain an appropriate

safety approved extension lead or adapter, or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse and dis-

pose of the plug immediately, to avoid a possible shock hazard by

inadvertent connection to the mains supply.

IMPORTANT: The wires in the mains lead are coloured in accord-

ance with the following code:

Blue

: Neutral

Brown : Live

Do not connect those leads to the earth terminal of a three-pin plug.

Safety precautions

WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALI-

FIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO

ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S

ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO

PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE

PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE

ACCOMPANYING THE APPLIANCE.

CAUTION

The marking is located on the rear panel and says that the compo-

nent uses laser beams that have been classified as Class 1. It means

that the unit is utilizing laser beams that are of a weaker class. There

is no danger of hazardous radiation outside the unit.

CLASS 1

LASER PRODUCT

The marking of products using lasers

(Except for some areas)

Before applying power

Caution : Read this page carefully to ensure safe operation.

Your New Kenwood 200-Disc Mega-Changer

Chapter

Your New Kenwood 200-Disc CD Changer

Welcome to your new Kenwood 200-Disc CD Changer.

CD-4700M is sold in USA. CD-4260M and CD-425M are sold in USA and Canada. DPF-J6030 is sold in other countries.

Unpacking

Unpack your new CD changer carefully and make sure that all the accessories are present:

If any accessories are missing, or if the changer is damaged or fails to operate, notify your dealer immediately. If your

changer was shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the

original carton and packing materials in case you need to move or ship the changer in the future.

Keep this manual handy for future reference.

Accessories

Audio cable ..................... (1)

System control cable .............. (1)

Batteries (R6/AA) ............ (4)

10-key Remote ................ (1)

REMOTE

CONTROL

UNIT

RC-P0713

SPACE

CHARAC.

DELETE

SELECTOR.

(

DISC

SKIP

)

MODE

SET

/CLEAR

CHECK

/P.MODE

POWER

DISC

DOWN

ENTER

CURSOR

4¢

DOWN

LEFT

RIGHT

CHARACTER

RANDOM

ISPLAY

CONFIRM

REPEAT

BEST

SELECTION.

+10

Infrared Remote Keyboard ...... (1)

REMOTE CONTROL UNIT RC-KB2

POWER

CONFIRM

BEST

SEL.

TITLE

INPUT

ROOM

CURSOR

CONT

PLAY

DISC

SEL

USER

FILE

NAME

SUB

OUT

MONIT.

DISC

SKIP

DISC

SKIP

DOWN

CHARAC.

SRCH

DOWN

CHARAC.

SRCH

REPEAT

RANDOM

DISPLAY

DELETE

+10

+100

ENTER

SET

MODE

SHIFT

P.MODE

CHECK

CLEAR

SPACE

BNM

;

()

÷ 200-disc capacity

÷ PC LINK function, which allows you to connect your PC to the CD player and download disc titles and

track data from an Intenet site and register them in the CD player. This function can also be used to input

title data directly from the PC to the CD player or control it from the PC.

÷ 10-key remote and infrared remote keyboard

÷ Digital audio output

÷ CD Text, which displays text from encoded CDs on the unit's display

÷ Disc and Track Naming, which allows you to program your own names for discs and tracks

÷ Music Type File, which lets you organize your discs into specific musical types (such as Classical, Jazz,

Rock), and then play them by type

÷ User File, which lets you organize your discs into user file name (such as father, mother, children), and

then play them by name

This CD changer offers the following exciting features :

Your new changer can play the following disc types :

÷ Standard 12 cm CDs

÷ CDV (Video) and CDG (Graphics), although it will not display the video portion

You may not play 8 cm CD "singles."

Communication cable ..... (1)

Your New Kenwood 200-Disc Mega-Changer

Chapter

Before applying power ............................................... 2

Safty precautions ...................................................... 2

Your New Kenwood 200-Disc CD Changer ............ 3

Table of Contents

Chapter 6 : Warnings and Specifications ............. 43

Warnings ................................................................................. 43

Specifications ........................................................................ 44

Chapter 1 : Setting Up Your New CD Changer ........... 5

Connecting to Other Devices ................................................ 6

System Control Chaining ........................................................ 8

Setting Up the 10-Key Remote and Keyboard .................... 9

10-Key Remote .......................................................... 9

Keyboard .................................................................... 9

Chapter 2 : Getting to know Your New CD Changer...... 10

Front Panel .............................................................................. 11

Front Panel Displays ............................................... 12

10-Key Remote and Keyboard ............................................. 13

10-Key Remote ........................................................ 13

Keyboard .................................................................. 14

Chapter 3 : Loading and Playing Discs ..................... 16

Preparation ............................................................................. 17

Loading discs in the carousel ................................ 17

Normal play (TRACK mode) ................................................. 19

Playing tracks in order from track No.1 ............... 19

Playback from desired track .................................. 21

Repeated playback (REPEAT mode) ................................... 22

Playback in a random order (RANDOM mode) ............... 23

Programming tracks in desired order (PGM mode) ............. 24

Timer operation ...................................................................... 26

Chapter 4 : Specifying and Using Disc or Track Data ... 27

Registration of Title ............................................................... 28

Assigning Title (TITLE INPUT mode) .................... 28

To change or delete a title ..................................... 30

Listening to music by genre (MUSIC TYPE mode) .............. 31

Registration of music type (MUSIC TYPE SET mode)

................................................................................................. 31

Playing the music type (MUSICTYPE PLAY mode) .... 32

Reorganizing discs to desired groups (USER FILE mode) .. 33

Registration of user file (USER FILE SET mode) ..... 33

Playing the user file (USER FILE PLAY mode) ..... 34

Assigning user file names (FILE NAME INPUT mode)

................................................................................... 35

To clear the user file (USER FILE CLEAR mode) ......... 36

Disc search (DISC SEARCH mode) ..................................... 37

Searching a disc by the disc title

(CHARAC. SEARCH mode) ..................................... 37

Searching the music type (M.TYPE SEARCH mode) .. 38

Searching the user file (U.FILE SEARCH mode) .. 39

Listening to your favorite titles (BEST SELECTION mode) ....... 40

Registration of best selection file ......................... 40

Playing the best selection file ............................... 40

Chapter 5 : In case of difficulty ............................... 41

In case of difficulty ................................................................ 41

Important items ...................................................................... 42

Caution : Read the pages marked

carefully to ensure safe operation.

Connecting to Other Devices

Chapter

Chapter 1 : Setting Up Your New CD Changer

1. All cables (except the digital optical cable and RS-232C cord) should have been supplied with your new CD changer.

See "Unpacking".

If you need to purchase additional or replacement cables, visit any home electronics store or the Kenwood USA Web site at

http://www.kenwoodusa.com. You can also call 1-800-KENWOOD. (For U.S.A. and Canada only)

2. Do not plug in the CD changer's power cord until you have finished making connections to your receiver or amplifier.

3. If you exposed your changer to a great difference in temperature (for example, if you purchased it in winter from a store with an

unheated warehouse) or if the humidity in the room changes, condensation may form inside the unit. If this occurs, connect the

unit, turn it on, and leave it on but unused for a few hours. This will evaporate the condensation and return your changer to working

order. Restart the changer before using it again.

4. Clean your CD changer with a soft, dry cloth. Avoid solvents of any kind, as they may damage the cabinet components.

5. Do not use CD accessories such as protection sheets or disc cleaners with your new CD changer.

6. Kenwood recommends having your CD changer's precision optical pickup inspected periodically. Depending on the operation

environment (humidity, dust, smoke, etc.), this pickup should operate approximately 1,000 hours before requiring inspection.

To schedule inspection, consult the store where you purchased the changer or visit the Kenwood USA Web site's Support area.

7. Be sure to locate your changer on a level and stationary surface, or it will not be able to play discs properly.

8. Your CD changer continues to store the following information for at least 3 weeks after you unplug its power cord:

÷ Power status (on or off)

÷ Disc and track names

÷ Music Type assignments

÷ User File assignments

÷ Best Selection assignments

After that you must reset this information according to the instructions in this manual.

9. Once you have set up the changer and loaded discs, you should not move it without doing the following:

(1) Remove all the discs from the unit and close the disc door.

(2) Look at the display. "NO DISC" should appear steadily (i.e., it should not be flashing).

(3) Turn off the CD changer.

(4) A few seconds after the display appears, disconnect the CD changer from the receiver and unplug the CD changer from the

wall outlet or power strip.

Notes

Welcome to the Kenwood CD-4700M/CD-4260M/CD-425M/DPF-J6030 Instruction manual.

The Instruction manual contains all the information you need to know to set up and operate your new CD changer safely and

enjoyably.

This chapter guides you through the connection and setup of your new CD changer and its remote.

Refer to the following pages for details on these issues :

÷ Connecting to a Other Devices

÷ System Control Chaining

÷ Setting Up the 10-Key Remote and Keyboard

Your CD changer includes a standard remote and a remote keyboard (for easier text entry). You can use either device

to control the changer. For the sake of simplicity, this manual provides standard remote instructions for all functions

except text entry.

Before You Begin

Be sure to read the notes on this page before you begin setting up the changer.