JVC XV-N320BEB - Owner's Manual Immediate Download

DVD PLAYER

XV-N320B

XV-N322S

INSTRUCTIONS

Warnings, Cautions and Others

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1. Do not remove screws, covers or cabinet.

2. Do not expose this appliance to rain or moisture.

Caution

STANDBY/ON button!

Disconnect the mains plug to shut the power off

completely. The

STANDBY/ON button in any

position does not disconnect the mains line. The power

can be remote controlled.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no

user serviceable parts inside the unit; leave all

servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when

open and interlock failed or defeated. Avoid direct

exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL,

PLACED INSIDE THE UNIT.

GNT0059-004A[EK]

0105MOC-MW-SC

Region code of DVD VIDEO

This player can play back DVD VIDEO discs

whose region code numbers include "2."

Examples of playable DVD VIDEO discs:

The player's region code is printed on the rear of

the player

Note of Color system format

This player accommodates the PAL system, and

also can play back discs recorded with NTSC

system. (NTSC video signals are converted to an

PAL signal and output.)

Supplied accessories

If anything is missing, consult your dealer

immediately.

· Remote control (x 1)

· R6(SUM-3)/AA(15F) battery (x 2)

VIDEO

ALL

CAUTION:

· Do not block the ventilation openings or holes. (If the

ventilation openings or holes are blocked by a newspaper

or cloth, etc., the heat may not be able to get out.)

· Do not place any naked flame sources, such as

lighted candles, on the apparatus.

· When discarding batteries, environmental problems

must be considered and local rules or laws governing

the disposal of these batteries must be followed strictly.

· Do not expose this apparatus to rain, moisture, dripping

or splashing and that no objects filled with liquids, such

as vases, shall be placed on the apparatus.

Caution: Proper Ventilation

To avoid risk of electric shock and fire and to protect

from damage, locate the apparatus as follows:

Front:

No obstructions and open spacing.

Sides:

No obstructions in 3 cm from the sides.

Top:

No obstructions in 5 cm from the top.

Back:

No obstructions in 15 cm from the back.

Bottom: No obstructions, place on the level surface.

Precautions

Notes on the power cord

· When you are away on travel or otherwise for an extended

period of time, remove the plug from the wall outlet. A

small amount of power (1.0 W) is always consumed while

the power cord is connected to the wall outlet.

· When unplugging the player from the wall outlet,

always pull the plug, not the power cord.

· Do not handle the power cord with wet hands!

· Disconnect the power cord before cleaning the

player or moving the player.

· Do not alter, twist or pull the power cord, or put

anything heavy on it, which may cause fire, electric

shock, or other accidents.

· If the cord is damaged, consult a dealer and have the

power cord replaced with a new one.

Avoid moisture, water, dust, and high temperatures

· Do not place the player in moist or dusty places.

· If water gets inside the player, turn off the power and

remove the plug from the wall outlet, then consult

your dealer. Using the player in this state may cause

a fire or electrical shock.

· Do not expose the player to direct sunlight or place it

near a heating device.

Notes on installation

· Select a place which is level, dry and neither too hot

nor too cold between 5°C and 35°C.

·Leave sufficient distance between the player and the TV.

· Do not install the player in a place subject to vibrations.

· Do not put heavy objects on the player.

To prevent malfunction of the player

· There are no user-serviceable parts inside. If

anything goes wrong, unplug the power cord and

consult your dealer.

· Do not insert any metallic objects, such as wires,

hairpins, coins, etc. into the player.

· Do not block the vents. Blocking the vents may

damage the player.

To clean the cabinet

· Use a soft cloth. Follow the relevant instructions on

the use of chemically-coated cloths.

· Do not use benzene, thinner or other organic solvents

and disinfectants. These may cause deformation or

discoloring.

Playable discs

· DVD VIDEO, Audio CD, Video CD, SVCD

· DVD-R/-RW written in the DVD VIDEO format

· CD-R/RW written in the SVCD, Video CD or Audio CD

format

· CD-R/RW written in MP3/JPEG in accordance with

the "ISO 9660" format

Supported Digital audio formats:

Linear PCM, MPEG Multichannel, Dolby Digital, DTS (Digital

Theater Systems)*

NOTES

· If a disc gets dirty, scratched or warped, or due to the

disc characteristics or recording conditions, the

player may not be able to play back such discs.

· The player can play back audio signals recorded in

MIX-MODE CD, CD-G, CD-EXTRA and CD TEXT.

· With some discs, operations may not be possible.

* To play back DTS-encoded DVD VIDEO or DTS-

encoded Audio CD discs correctly, connect the

player to an amplifier with a built-in DTS decoder.

Otherwise, playback sound will be distorted.

Unplayable discs

If you try to play back discs listed below, noise may be

generated and causes damage to speakers.

· DVD-RW written in the VR format

· DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM,

PHOTO CD, SACD

· Unfinalized discs

· Discs of irregular shape or discs with tape, seals or

paste on either the label side or playback side.

Playing back these discs may damage the player.

The Non-DVD side of a "DualDisc" does not comply with

the "Compact Disc Digital Audio" standard.

Therefore, the use of Non-DVD side of a DualDisc on

this product may not be recommended.

XV-N320B/XV-N322S

Wall or

obstructions

Floor

Spacing 15 cm or more

Stand height

5 cm or more

Front

VIDEO

Connecting to a TV with component jacks

To switch the scanning mode between Progressive and

Interlace, press and hold VFP-I/P on the remote control

for a few seconds.

NOTES

· Connect to a TV with composite jacks and set

[CONNECTIONS] to [VIDEO COMPONENT] before

connecting with component jacks. (See

"CONNECTIONS" in "Initial settings.")

· Connect "Y" to "Y,""PB" to "PB(CB),""PR" to "PR(CR)"

correctly.

· The VIDEO jack, AV OUT terminal, and component

(Y,PB, PR) jacks cannot be used at the same time.

About the scanning mode indicator

NOTE

Some progressive TV and High-Definition TV sets are

not fully compatible with the player. To check the

compatibility of your TV, contact your local JVC

customer service center.

Connecting to a stereo audio amplifier (receiver)

Connecting to a digital audio device

To enjoy high-quality surround sound, connect the

DIGITAL OUT (COAXIAL) jack to a Dolby Digital or DTS

decoder or an amplifier with a built-in decoder.

NOTES

· Depending on the disc, no signal may be outputted

from the DIGITAL OUT. Make an analog connection

in this case.

· Set [DIGITAL AUDIO OUTPUT] in the [AUDIO]

preference display correctly according to the

connected digital audio equipment. (See "DIGITAL

AUDIO OUTPUT" in "Initial settings.")

[PICTURE SOURCE] of

the PICTURE menu

Source type of DVD VIDEO

Film source

Video source

AUTO

[DDP]

[P]

FILM

[DDP]

VIDEO(NORMAL)/

(ACTIVE)

[P]

XIAL

LEFT

RIGHT

TREAM

L OUT

AUDIO OUT

VIDEO OUT

VIDEO

To component

video input

To analog

audio input

LEFT

RIGHT

AUDIO OUT

VIDEO OUT

VIDEO

To analog audio input

COAXIAL

LEFT

RIGHT

PCM/STREAM

DIGITAL OUT

AUDIO OUT

VIDEO OUT

VIDEO

To digital audio input

To analog

audio input

Connections

Before making connections:

· Do not connect the AC power cord until all other connections have been made.

· Connect VIDEO OUT of the player directly to the video input of your TV. Connecting VIDEO OUT of the

player to a TV via a VCR/an integrated TV/Video system may cause a monitor problem.

Connecting to a TV with SCART connector

Connecting to a TV with composite jacks

AV OUT

IGH

EFT

UDIO

VIDEO

S-VIDEO

SCART cable

(not supplied)

NOTE

The VIDEO jack, AV OUT terminal, and

component (Y,PB, PR) jacks cannot be

used at the same time.

The player

VIDEO

COAXIAL

PCM/STREAM

DIGITAL

OUT

AUDIO

OUT

VIDEO

OUT

RIGHT

LEFT

RIG

LEF

DIO

VIDEO

NOTES

· If your TV has a monaural audio input

instead of stereo, use an optional audio

cable which converts stereo audio

output to monaural.

· The VIDEO jack, AV OUT terminal, and

component (Y,PB, PR) jacks cannot be

used at the same time.

Audio/video cable

(not supplied)

Red

White

The player

Yellow

Turning on the power

Inserting the AC power plug

After all other connections have been made, insert the

AC power plug to the wall outlet firmly.

Installing the batteries in the remote control

Open the compartment cover, and place the two

supplied R6(SUM-3)/AA(15F) batteries in the remote

control according to the polarity markings ("+" and "")

inside the compartment. Then replace the cover.

The batteries will last about six months with normal use.

If the functions of the remote control become erratic,

replace the batteries.

Precautions of the safe use of batteries

Observe the following precautions for the safe use of

batteries. If they are used improperly their lives will be

shortened, they may burst or their contents may leak.

· Remove the batteries from the remote control if it is

not going to be used for a long period of time.

· Remove dead batteries and dispose of them

properly.

· Never leave dead batteries lying around, take them

apart, mix them with other refuse, or throw them into

an incinerator.

· Never touch liquid that has leaked out of a battery.

· Do not mix new and old batteries, or batteries of

different types, when placing them.

Turning on and off the player

Press

STANDBY/ON.

Initial setup

When you turn on the player for the first time after

purchase, the following message appears on the TV

screen.

Before enjoying this player, make the initial settings as

follows:

1 Press ENTER.

2 Press

5/ to select the on-screen language for

the preference displays, etc., then press ENTER.

3 Press

5/ to select the monitor type, then press

ENTER.

· For a normal (conventional) TV, select "4:3 LB" or

"4:3 PS." (See "MONITOR TYPE" in "Initial

settings.")

· For a wide-screen TV, select "16:9."

4 Press

5/ to select a desired digital output

signal type, then press ENTER.

Set this item correctly according to the logo on your

receiver or decoder.

(If you do not connect the player to such a device,

press ENTER to finish the setting.)

· Receiver/decoder bearing Dolby Digital logo and

no DTS, select "DOLBY DIGITAL/PCM."

· Receiver/decoder bearing both Dolby Digital and

DTS logos, select "STREAM/PCM."

· Receiver/decoder bearing neither Dolby Digital nor

DTS logo, or digital recorder, select "PCM ONLY."

To bring up the DVD PLAYER SETUP display later

Press SET UP for a few seconds until the DVD PLAYER

SETUP display appears.

EXECUTE DVD PLAYER SETUP? - BASIC PICTURE/AUDIO

SETTING

YES - PRESS ENTER

NO - PRESS CANCEL

MENU LANGUAGE

ENGLISH

AUDIO LANGUAGE

ENGLISH

SUBTITLE

ENGLISH

ON SCREEN LANGUAGE

ENGLISH

DVD PLAYER SETUP

ENGLISH

FRENCH

GERMAN

MONITOR TYPE

4:3 L.B.

PICTURE SOURCE

AUTO

SCREEN SAVER

CONNECTIONS

BACKGROUND

SCART RGB

ANDARD

DVD PLAYER SETUP

16:9

4:3 LB

4:3 PS

DIGITAL AUDIO OUTPUT

DOLBY DIGITAL/PCM

ANALOG DOWNMIX

DOLBY PROLOGIC

D.RANGE CONTROL

OUTPUT LEVEL

DVD PLAYER SETUP

PCM ONLY

DOLBY DIGITAL/PCM

STREAM/PCM

STANDARD

Advanced Operations

OPEN/

LIST

SET UP

CLEAR

SLOW +

DISPLAY ON SCREEN

ENTER

STANDBY/ON

VFP

I/P

CANCEL

RETURN

SOUND

EFFECT

TITLE/

GROUP

DIMMER

AUDIO

SUBTITLE

ANGLE

SLIDE EFFECT

ZOOM

THUMBNAIL/

TOP

SELECT

Changing the picture tone (VFP)

The VFP (Video Fine Processor)

function allows you to adjust the

picture character according to the

type of programming, picture tone or

personal preferences.

1 Press VFP-I/P.

2 Press

2/3 to select the desired

preset.

NORMAL For watching TV in a

general room.

CINEMA

For watching a movie

software in a room with

suppressed light.

USER1

USER2

You can adjust

parameters that affect the

picture character and

store the settings as a user

preset. See below.

To adjust the picture tone

1 Select "USER1" or "USER2."

2 Press

5/ to select a parameter, then press ENTER.

3 Press

5/ to adjust the parameter, then press ENTER.

4 Repeat step 2 and 3 to adjust other parameters.

5 Press VFP-I/P to finish the setting.

USER 1

BRIGHTNESS

GAMMA

CONTRAST

SATURATION

TINT

SHARPNESS

Y DELAY

+ 4

MID

+10

LOW

+ 2

Selected

Preset

Parameter

GAMMA

Adjust this if the neutral color is bright or dark.

The brightness of dark and bright portion is

maintained (LOW/MID/HIGH).

BRIGHTNESS

Adjust this if the picture is bright or dark on the

whole (16 (darkest) to +16 (brightest)).

CONTRAST

Adjust this if the far and near position is unnatural

(12 to +12).

SATURATION

Adjust this if the picture is whitish or blackish

(16 (blackest) to +16 (whitest)).

TINT

Adjust this if the appearance of flesh tone is

unnatural (16 to +16).

SHARPNESS

Adjust this if the picture is indistinct (LOW/HIGH).

Y DELAY

Adjust this if the picture looks separately/

overlapped (2 to +2).

Changing the Sound Field

Each time you press SOUND

EFFECT, the Sound Effect mode

changes.

· As the value becomes bigger, the

Sound Effect works stronger.

Zooming the picture

Each time you press ZOOM, the

magnification changes.

· You can use

5//2/3 button to

move the zoomed position.

To return to the normal playback,

select the normal size by pressing

ZOOM repeatedly.

Changing the language, sound

and scene angle

1 Press the button.

2 Press the button repeatedly or

5/ to select the desired item.

3 Press ENTER to finish the

setting.

Buttons

To do

AUDIO

For DVD Video:

select audio languages.

For SVCD/VCD:

select the audio

channel.

SUBTITLE

select the subtitle.

ANGLE

select the view-angle.

OPEN/

LIST

SET UP

CLEAR

SLOW +

DISPLAY ON SCREEN

ENTER

STANDBY/ON

VFP

I/P

CANCEL

RETURN

SOUND

EFFECT

TITLE/

GROUP

DIMMER

AUDIO

SUBTITLE

ANGLE

SLIDE EFFECT

ZOOM

THUMBNAIL/

TOP

SELECT

Basic playback

Buttons To do

Start/resume normal Playback

Stop

· When RESUME is ON or DISC

RESUME, this player

memorizes the position on the

disc where you interrupted

playback.

To resume playback, press

To stop playback completely,

press

7 again.

Pause

· Each time you press the button,

the still picture advances to the

next frame.

¡/1 Fast forward/backward

(While paused)

Slow-motion playback

· Each time you press the button,

the playback speed changes.

¢/4 Skip chapter/track

· If you press and hold the button

during playback, playback is

advanced/reversed at 5 times

normal speed.

VARIABLE

PLAYBACK

(For DVD Video)

The disc is played back at about

1.2 or 1.5 times (FAST)/0.8 or 0.6

times (SLOW) normal speed.

The sound is not muted, and the

subtitle does not go off (except for

DTS).

(For SVCD/VCD)

The disc is played back at about

2 times (FAST)/0.5 times (SLOW)

normal speed.

(Only for DVD Video)

The playback position moves

back 10 seconds before the

current position (only within the

same title).

38 on the player starts/pauses playback.

Changing the display brightness

Press DIMMER to change the brightness of

the display window.

Using the disc menu

You can operate a disc--SVCD/

VCD with Playback Control*

(PBC)--using the disc menu

shown on the TV screen.

* A method of controlling disc play

for SVCD/VCD by using the disc

menu.

7 For DVD

1 Press TOP MENU or MENU to show the disc menu.

2 Press

5//2/3 to select a desired item, then press

ENTER or

3 (SELECT).

· With some discs, you can also select items by entering the

number using the numeric buttons.

7 For SVCD/VCD

1 While stopped, press TOP MENU or

3 (SELECT) to

show the menu.

2 Press the numeric buttons to select a desired item.

To select 5: press 5.

To select 23: press 2, then 3.

To select 40: press 4, then 0.

· To move to the next or previous page of the current menu,

press

¢ or 4.

· To return to the previous menu, press RETURN.

To play back without PBC

While stopped, press the numeric buttons instead of

(SELECT) to start playback.

To reactivate PBC

· Press TOP MENU or MENU.

· Press

7 to stop playback, then 3 (SELECT).

Turning on and off the player

Open/close the disc tray

Changing the display window

contents

Each time you press DISPLAY,

the display window contents

changes.

Locating the beginning of a scene

or song

You can select a title/chapter/

track directly and start playback.

For DVD Video:

(While stopped) select title.

(While playing back) select

chapter.

For SVCD/VCD/CD:

Select track.

To select 5: press 5.

To select 23: press 2, then 3.

To select 40: press 4, then 0.

·If you press TITLE/GROUP

before entering the number, you

can select the title instead of the

chapter.

Basic Operations

With the label side up

Turning on and off the player

Insert a disc

1 Press

0 to open the disc tray.

2 Place a disc in the disc tray.

· To insert an 8-cm disc, place it in the inner

recess.

3 Press

0 to close the disc tray.

Point toward the remote sensor directly as

possible (the operating range is approx. 5 m.)

· Each indicator lights up when corresponding

function/mode is activated, or corresponding

information is on the main display.

Main display

About On-screen guide icons

: Playback.

: Pause.

/: Slow-motion playback with the current

speed.

/: Fast forward/backward playback with

the current speed.

: At the beginning of a scene containing

multi-angle views.

: At the beginning of a scene containing

multi-audio sounds.

: At the beginning of a scene containing

multi-subtitles.

You can change the setting so that the on-screen

guide icons do not appear on the TV screen. (See

"ON SCREEN GUIDE" in "Initial settings.")

XV-N320[EK]5.indd 1

12/27/04 11:16:18 AM

Menu bar functions

You can use various functions from the menu bar.

To bring up the menu bar

When a disc is inserted, press ON SCREEN twice.

A menu bar for the type of disc inserted will appear

under the status bar.

Ex.: Menu bar for DVD VIDEO

To dismiss the menu bar and the status bar, press ON

SCREEN.

Basic operation procedure

1 Press

2/3 to select the icon you want to work with.

2 Press ENTER.

After pressing ENTER:

(1) When a pull-down menu appears, press

5/ to

select the setting you want, then press ENTER.

(2) When a number-entry box appears, use the

numeric buttons to enter the number you want,

then press ENTER.

(3) When changing

setting, press ENTER

repeatedly to select the setting you want.

NOTES

· The selected item on the menu bar is shown in green.

· The available functions differ depending on the

player status. Refer to the explanation below to check

when you can use a certain function.

Menu bar functions

selects the time mode shown in the display

window and the status bar.

· TOTAL: Elapsed time of current title (DVD) or a disc

(CD/VCD/SVCD)

· T.REM: Remaining time of current title (DVD) or a disc

(CD/VCD/SVCD)

(Except for DVD: while stopped, disc total time)

· TIME:

Elapsed time of current chapter (DVD) or

track (CD/VCD/SVCD)

· REM:

Remaining time of current chapter (DVD) or

track (CD/VCD/SVCD)

(while stopped, current track total time)

selects repeat mode.

DVD:

During playback

CD:

In any condition

VCD/SVCD: In any condition except PBC playback

· CHAPTER: Current chapter repeat (DVD)

· TITLE:

Current title repeat (DVD)

· TRACK:

Current track repeat (CD/VCD/SVCD)

· ALL:

All track repeat (CD/VCD/SVCD)

· A-B:

A-B repeat (During playback). After

selecting A-B, press ENTER at the

beginning point of repeat, then press

ENTER again at the end point.

· OFF:

Repeat mode deactivated. Select this to

quit repeat mode.

specifies beginning point of a title (DVD) or a

disc (CD/VCD/SVCD) by the time.

DVD:

In any condition

CD:

In any condition except program or

random playback

VCD/SVCD: In any condition except PBC or program

or random playback

specifies a chapter to play back from

(DVD only).

selects the audio language (DVD), sound

track (DVD), or audio channel (VCD/SVCD) during

playback.

selects the subtitle language (DVD) or

subtitle (SVCD) during playback.

selects a desired scene angle in a multi-

angle part (DVD only).

specifies the playback order of tracks while

stopped (unavailable for DVD). You can program up to

99 tracks.

1. After selecting

icon, press the numeric

buttons to specify tracks in the desired order.

· To correct the program, press

5/ to move

the track to be corrected, then press CANCEL. The

track is erased and the subsequent programmed

tracks move up.

Pressing

7 clears all the programmed tracks.

2. Press

3(SELECT) to start program playback.

· During program playback, you cannot edit the

program contents.

· To exit the program mode, press ON SCREEN after

clearing the program.

activates random playback while stopped

(unavailable for DVD).

After selecting

icon, press ENTER.

The player starts random playback.

Audio/Video files playback

You can play back MP3/JPEG files on a CD/CD-R/RW.

Precautions

· Use "ISO 9660" as the disc format.

· The player does not support "packet writing (UDF

files)" discs.

· The player supports discs recorded with up to five

multiple sessions.

· The player may be unable to play back a disc due to

the characteristics or recording conditions.

· The player recognizes up to the fifth layer of groups,

999 files per group (including unplayable files), and

up to 250 groups per disc.

· Add the appropriate extension (".mp3" and ".jpg") to

the file name.

· MP3i and MP3 Pro are not available.

· The player cannot play back a picture of more than

5120 x 3413 pixels (baseline JPEG) or 2048 x 1536

pixels (progressive JPEG).

Selecting a specific file or group

You can select files or folders (groups) using the

Control display on the TV screen.

Control display

Press

5//2/3 to move the cursor bar to a desired

file, then press

3(SELECT).

· When you press ENTER, only the selected file is

played back (except for MP3 files).

Various playback mode

· To play back a disc continuously, select NORMAL.

Repeat playback

1. While stopped, press

5//2/3 to move the cursor

bar to playback mode.

2. Press ENTER repeatedly to select the desired repeat

mode.

· REPEAT 1: Repeats the current file.

· REPEAT GROUP: Repeats all files in the current

group.

· REPEAT ALL: Repeats all files on the disc.

3. Press

3 to move the cursor bar to the file column,

then press

3(SELECT).

Random playback

1. While stopped, press

5//2/3 to move the cursor

bar to playback mode.

2. Press ENTER repeatedly to select RANDOM.

3. Press

3 to move the cursor bar to the file column,

then press

3(SELECT).

Program playback

1. While stopped, press

5//2/3 to move the cursor

bar to playback mode.

2. Press ENTER repeatedly to select PROGRAM.

3. Press

5//2/3 to select the desired file, then press

ENTER.

4. Repeat step 3 until all the desired files are selected.

· To erase the last programmed file, press

2 to

move the cursor bar to the programmed files

column, then press CANCEL.

5. Press

3(SELECT).

Various JPEG files playback

To zoom in a picture

Press ZOOM.

Each time you press ZOOM, you can magnify a JPEG

file (x1.5/x2).

NOTE

This function is not available for some JPEG files

depending on their resolution size and JPEG format.

To rotate/reflect a still picture

While a still picture is played back:

· Pressing

2/3 rotates the picture by 90°.

· Pressing

5 reflects the picture vertically.

· Pressing

reflects the picture horizontally.

To select a JPEG files from the thumbnail list

1. Press and hold THUMBNAIL/LIST while a JPEG file

is selected on the Control display.

2. Press

5//2/3 to select the desired picture, then

press ENTER.

· You can change the page of thumbnail list by

pressing

4/¢.

Slide show playback of JPEG files

Press

3(SELECT) while a JPEG file is selected on the

Control display.

· To select slide show effect

Press and hold ANGLE-SLIDE EFFECT until

[SLIDE EFFECT MODE:] and the current mode

appears on the TV screen.

By pressing and holding the button repeatedly, you

can select the effect from 11 effects, random effect

selection (RAND), and no effect (NONE).

The effect is not applied to progressive JPEG files.

NORMAL

GROUP

MP3

SLIDESHOW

MIX

PICT01.jpg

PICT02.jpg

PICT03.jpg

MUSIC01.mp3

MUSIC02.mp3

DISC CONTROL

Select these

sections to show the

upper layer.

Current file

Group column

Current group

Current playback mode

File column

AUDIO menu

Item

Contents

DIGITAL AUDIO

OUTPUT

Set this item correctly according to the logo on your receiver or decoder.

[PCM ONLY]: Receiver/decoder bearing neither Dolby Digital nor DTS logo, or digital

recorder.

[DOLBY DIGITAL/PCM]: Receiver/decoder bearing Dolby Digital logo and no DTS.

[STREAM/PCM]: Receiver/decoder bearing both Dolby Digital and DTS logos.

ANALOG DOWNMIX

Set this item properly according to your analog audio connection to play the sound of

the surround multichannel audio on a DVD VIDEO.

[DOLBY SURROUND]: Select this when connecting to a surround decoder.

[STEREO]: Select this when connecting to a stereo amplifier or TV, or in case you

want to record from a DVD VIDEO to a MiniDisc, cassette, etc.

D.RANGE CONTROL

Set this item to listen to DVD VIDEO recorded in Dolby Digital format at low or middle volume.

[WIDE RANGE]: You can enjoy powerful playback sound.

[NORMAL]: Normally, select this.

[TV MODE]: Select this if the sound level of DVD VIDEO is lower than the one of TV

program to make the sound at a lower volume clear.

OUTPUT LEVEL

Set this item to attenuate the level of the signal output from the analog AUDIO OUT

terminals. If the sound from the speaker is distorted, select [LOW].

OTHERS menu

Item

Contents

RESUME

You can select the resume playback mode.

[ON]: The player resumes playback from the position where playback has been

stopped if the disc is still in the disc tray.

[OFF]: This function is deactivated.

[DISC RESUME]: The player resumes playback of the last 10 discs played. The

player retains a memory of the stopped position of each disc even if the disc is

removed from the disc tray.

ON SCREEN GUIDE

Activate or deactivate the on-screen guide.

AUTO STANDBY

Set the time until the player turns off (into standby) automatically if playback is stopped

for more than 30 minutes or 60 minutes.

PARENTAL LOCK

Select this item, then press ENTER to show the PARENTAL LOCK menu for limiting

playback by children. Scenes which are limited by this function are not played or

replaced with other scenes.

[COUNTRY CODE]: Select the code of your country/area.

[SET LEVEL]: Select the level of restriction. ("1" is the strictest.)

[PASSWORD]: Enter your 4-digit password by pressing the numeric buttons (0 to 9).

[EXIT]: Select this and press ENTER to go back to the OTHERS menu.

Notes:

·Some DVD VIDEO cannot be played by this function. If you try to play such a disc,

the PARENTAL LOCK menu appears on the TV and asks whether you want to

release the lock or not.

To release the lock and play, select "TEMPORARY RELEASE," press ENTER, then

enter your password. Otherwise, eject the disc.

· To change the setting of the limitation, you need to enter your password.

·If you forget your password, enter "8888."

SET LEVEL

NONE

PASSWORD

_ _ _ _

PARENTAL LOCK

EXIT

COUNTRY CODE

Initial settings

You can change the settings of this player according to your preferences and playing environment.

How to set the Initial settings

1 Press SET UP.

2 Press

2/3 to select the menu.

3 Press

5/ to move to select the item.

4 Press ENTER.

5 Press

5/ to select the options, then press ENTER.

To dismiss a preference display

Press SET UP.

NOTES

·Some items in the menus cannot be changed during

playback.

·During MP3 files playback, you cannot show the menus.

·If the upper and lower parts of the menu are cut off,

adjust the picture size control of the TV.

·For settings of the LANGUAGE menu or the PARENTAL

LOCK menu, see also "Language codes" below.

· Depending on the disc, the settings may not apply correctly.

Item

Contents

MENU LANGUAGE

You can select the default menu language of DVD VIDEO.

AUDIO LANGUAGE

You can select the default audio language of DVD VIDEO.

SUBTITLE

You can select the default subtitle language of DVD VIDEO.

ON SCREEN LANGUAGE You can select "ENGLISH," "FRENCH," or "GERMAN" as the on-screen language.

LANGUAGE menu

PICTURE menu

Item

Contents

MONITOR TYPE

You can select the monitor type to match your TV when you play back DVD VIDEO

discs recorded for wide-screen televisions.

[16:9] (Wide television screen): For a wide-screen (16:9) TV.

[4:3 LB] (Letter Box conversion): For a normal (4:3) TV. Displays a wide-screen

picture to fit the width of the TV screen keeping the aspect ratio.

[4:3 PS] (Pan Scan conversion): For a normal (4:3) TV. The picture is zoomed up to

filling the screen vertically and the left and right sides of the picture are cut off.

PICTURE SOURCE

You can obtain optimal picture quality by selecting the source type of the disc contents.

[AUTO]: Normally, select this option. The player recognizes the picture type (film or

video source) of the current disc according to the disc information.

[FILM]: For a film source disc.

[VIDEO(NORMAL)]: For a video source disc with relatively a few movements.

[VIDEO(ACTIVE)]: For a video source disc with relatively a lot of movements.

SCREEN SAVER

You can set the screen saver function to ON or OFF.

CONNECTIONS

You need to select the video signal type when you connect the player to a TV with a

SCART connector.

[VIDEO COMPONENT]: A TV accommodates component signals.

[SCART S-VIDEO]: A TV accommodates S-video (Y/C) signals.

[SCART RGB]: A TV accommodates RGB signals.

Note:

If a TV accommodates composite signals, select [VIDEO COMPONENT] or [SCART

RGB].

BACKGROUND

You can use your favorite image as the opening display.

[STANDARD]: Display the JVC original image.

[USER]: Display your favorite image as the opening display when a JPEG image is

registered.

[SAVE AS BACKGROUND]: To register a new image, select this while a JPEG

image is displayed on the TV.

16:9

4:3 LB

4:3 PS

Troubleshooting

Power

Power does not come on.

\ Power plug is not inserted securely. Plug in

securely.

Operation

"REGION CODE ERROR!" is shown on the TV.

\ Region code of the inserted disc does not match the

player. Check the region code of the disc printed on

the disc jacket.

Operation is not possible.

\ Microcomputer malfunction due to lightning or static

electricity. Turn off the power and unplug the power

cord, then connect the power cord again.

\ Moisture condensation caused by a sudden change

of temperature or humidity. Turn off the power, then

turn it on a few hours later.

\ The disc does not allow the operation, or an

unplayable disc is inserted. Check and replace the

disc.

[LOCK] is displayed on the display window

and the disc tray does not open.

\ When you press 0 while pressing down 7 on the

player in standby mode, the tray lock function is

activated. The disc tray cannot be opened or closed

in this status. To release this status, press

0 while

pressing down

7 on the player in standby mode.

Picture

Picture is noisy.

\ The player is connected to a VCR directly and the

copyguard function is activated. Connect the player

so that the picture signal flows directly to the TV.

With some discs, the picture may be blurred when

[PICTURE SOURCE] is set to [FILM] or [AUTO].

Set [PICTURE SOURCE] to [VIDEO (NORMAL)] or

[VIDEO (ACTIVE)].

No picture is displayed on the TV screen or the

screen is blurred or divided into two parts.

\ The player is in the progressive scanning mode

though it is connected to a TV via the VIDEO or

SCART connector. Observe the display window. If

[P] is turned on, the player is in the progressive

scanning mode.

Make the Progressive scanning mode inactive by

using the VFP - I/P button.

Audio

DVD VIDEO disc playback sound level is lower

than TV broadcast sound level.

\ Set the [D.RANGE CONTROL] preference to [TV

MODE].

Analog audio output is distorted.

\ Set the [OUTPUT LEVEL] preference to [LOW].

MP3/JPEG

No sound and/or no picture comes out.

\ MP3/JPEG disc is recorded with the "packet writing

(UDF file)." It cannot be played.

Check the files you want to play back.

Files (tracks) are not played in the recorded

order.

\ This player plays the files in the alphabetic order.

So, the playback order can vary.

Country/Area code list for Parental Lock

Andorra

United Arab Emirates

Afghanistan

Antigua and Barbuda

Anguilla

Albania

Armenia

Netherlands Antilles

Angola

Antarctica

Argentina

American Samoa

Austria

Australia

AW Aruba

Azerbaijan

Bosnia and Herzegovina

Barbados

Bangladesh

Belgium

Burkina Faso

Bulgaria

Bahrain

Burundi

Benin

Bermuda

Brunei Darussalam

Bolivia

Brazil

Bahamas

Bhutan

Bouvet Island

BW Botswana

Belarus

Belize

Canada

Cocos (Keeling) Islands

Central African Republic

Congo

Switzerland

Côte d'Ivoire

Cook Islands

Chile

Cameroon

China

Colombia

Costa Rica

Cuba

Cape Verde

Christmas Island

Cyprus

Czech Republic

Germany

Djibouti

Denmark

Dominica

Dominican Republic

Algeria

Ecuador

Estonia

Egypt

Western Sahara

Eritrea

Spain

Ethiopia

Finland

Fiji

Falkland Islands

Micronesia (Federated

States of)

Faroe Islands

France

France, Metropolitan

Gabon

United Kingdom

Grenada

Georgia

French Guiana

Ghana

Gibraltar

Greenland

GM Gambia

Guinea

Guadeloupe

Equatorial Guinea

Greece

South Georgia and the

South Sandwich

Guatemala

Guam

GW Guinea-Bissau

Guyana

Hong Kong

Heard Island and

McDonald Islands

Honduras

Croatia

Haiti

Hungary

Indonesia

Ireland

Israel

India

British Indian Ocean

Territory

Iraq

Iran (Islamic Republic of)

Iceland

Italy

Jamaica

Jordan

Japan

Kenya

Kyrgyzstan

Cambodia

Kiribati

Comoros

Saint Kitts and Nevis

Korea, Democratic

People's Republic of

Korea, Republic of

KW Kuwait

Cayman Islands

Kazakhstan

Lao People's

Democratic Republic

Lebanon

Saint Lucia

Liechtenstein

Sri Lanka

Liberia

Lesotho

Lithuania

Luxembourg

Latvia

Libyan Arab Jamahiriya

Morocco

Monaco

Moldova, Republic of

MG Madagascar

Marshall Islands

Mali

MM Myanmar

Mongolia

MO Macau

Northern Mariana

Islands

MQ Martinique

Mauritania

Montserrat

Malta

Mauritius

Maldives

MW Malawi

Mexico

Malaysia

Mozambique

Namibia

New Caledonia

Niger

Norfolk Island

Nigeria

Nicaragua

Netherlands

Norway

Nepal

Nauru

Niue

New Zealand

OM Oman

Panama

Peru

French Polynesia

Papua New Guinea

Philippines

Pakistan

Poland

Saint Pierre and

Miquelon

Pitcairn

Puerto Rico

Portugal

PW Palau

Paraguay

Qatar

Réunion

Romania

Russian Federation

RW Rwanda

Saudi Arabia

Solomon Islands

Seychelles

Sudan

Sweden

Singapore

Saint Helena

Slovenia

Svalbard and Jan Mayen

Slovakia

Sierra Leone

San Marino

Senegal

Somalia

Suriname

Sao Tome and

Principe

El Salvador

Syrian Arab Republic

Swaziland

Turks and Caicos

Islands

Chad

French Southern

Territories

Togo

Thailand

Tajikistan

Tokelau

Turkmenistan

Tunisia

Tonga

East Timor

Turkey

Trinidad and Tobago

Tuvalu

Taiwan

Tanzania, United

Republic of

Ukraine

Uganda

United States Minor

Outlying Islands

United States

Uruguay

Uzbekistan

Vatican City State

(Holy See)

Saint Vincent and the

Grenadines

Venezuela

Virgin Islands (British)

Virgin Islands (U.S.)

Vietnam

Vanuatu

Wallis and Futuna

Islands

WS Samoa

Yemen

Mayotte

Yugoslavia

South Africa

Zambia

Zaire

Zimbabwe

Language codes list for the LANGUAGE menu

Afar

Abkhazian

Afrikaans

AM Ameharic

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Byelorussian

BG Bulgarian

Bihari

Bislama

Bengali,Ban-

gla

BO Tibetan

Breton

Catalan

CO Corsican

Czech

Welsh

Danish

Bhutani

Greek

EO Esperanto

Estonian

Basque

Persian

Finnish

Fiji

Faroese

Frisian

GA Irish

GD Scots Gaelic

Galician

GN Guarani

GU Gujarati

Hausa

Hindi

HR Croatian

HU Hungarian

Armenian

Interlingua

Interlingue

Inupiak

Indonesian

Icelandic

Hebrew

Yiddish

JW Javanese

Georgian

Kazakh

Greenlandic

KM Cambodian

Kannada

KO Korean (KOR)

Kashmiri

Kurdish

Kirghiz

Latin

Lingala

Laothian

Lithuanian

Latvian,

Lettish

MG Malagasy

Maori

MK Macedonian

Malayalam

MN Mongolian

MO Moldavian

MR Marathi

MS Malay (MAY)

MT Maltese

MY Burmese

Nauru

Nepali

Dutch

NO Norwegian

OC Occitan

OM (Afan) Oromo

OR Oriya

Panjabi

Polish

Pashto,

Pushto

Portuguese

QU Quechua

RM Rhaeto-

Romance

RN Kirundi

RO Rumanian

RU Russian

RW Kinyarwanda

Sanskrit

Sindhi

SG Sangho

Serbo-Croatian

Singhalese

Slovak

Slovenian

SM Samoan

Shona

SO Somali

SQ Albanian

Serbian

Siswati

Sesotho

Sundanese

Swedish

SW Swahili

Tamil

Telugu

Tajik

Thai

Tigrinya

Turkmen

Tagalog

Setswana

Tongan

Turkish

Tsonga

Tatar

TW Twi

Ukrainian

UR Urdu

Uzbek

Vietnamese

VO Volapuk

WO Wolof

Xhosa

YO Yoruba

Zulu

Specifications Specifications and appearance are subject to change without prior notice.

General

Readable discs:

DVD VIDEO, DVD-R (Video format), DVD-RW (Video

format), SVCD, Video CD, Audio CD (CD-DA),

CD-R/RW (CD-DA, SVCD, Video CD, MP3 format,

JPEG)

Video format: PAL, 625i/625p selectable

Other

Power requirements: AC 230 V

, 50 Hz

Power consumption:

11.0 W (POWER ON), 1.0 W (STANDBY mode)

Mass: 1.5 kg

Dimensions (W x H x D):

435 mm x 44 mm x 201.5 mm

Video outputs

VIDEO OUT (pin jack): 1.0 Vp-p (75

)

RGB Output:

700 mVp-p (75

)

Component (pin jacks)

Y Output:

1.0 Vp-p (75

)

PB/PR Output: 0.7 Vp-p (75

)

Horizontal resolution: 500 lines or more

Audio outputs

ANALOG OUT (pin jack): 2.0 Vrms (10 k

)

DIGITAL OUT (COAXIAL): 0.5 Vp-p (75

termination)

Audio characteristics

Frequency response

CD (sampling frequency 44.1 kHz): 2 Hz to 20 kHz

DVD (sampling frequency 48 kHz):

2 Hz to 22 kHz(4 Hz to 20 kHz for DTS and Dolby

Digital bitstream signals)

DVD (sampling frequency 96 kHz): 2 Hz to 44 kHz

Wow and flutter: Unmeasurable (less than ± 0.002%)

Total harmonic distortion: less than 0.009%

·Manufactured under license from Dolby

Laboratories. "Dolby" and the double-D symbol are

trademarks of Dolby Laboratories.

·"DTS" and "DTS Digital Out" are trademarks of Digital

Theater Systems, Inc.

·This product incorporates copyright protection

technology that is protected by U.S. patents and

other intellectual property rights. Use of this copyright

protection technology must be authorized by

Macrovision, and is intended for home and other

limited viewing uses only unless otherwise authorized

by Macrovision. Reverse engineering or disassembly

is prohibited.

·"CONSUMERS SHOULD NOTE THAT NOT ALL HIGH

DEFINITION TELEVISION SETS ARE FULLY

COMPATIBLE WITH THIS PRODUCT AND MAY

CAUSE ARTIFACTS TO BE DISPLAYED IN THE

PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE

SCAN PICTURE PROBLEMS, IT IS RECOMMENDED

THAT THE USER SWITCH THE CONNECTION TO

THE `STANDARD DEFINITION' OUTPUT. IF THERE

ARE QUESTIONS REGARDING OUR TV SET

COMPATIBILITY WITH THIS MODEL 525p AND 625p

DVD PLAYER, PLEASE CONTACT OUR CUSTOMER

SERVICE CENTER."

XV-N320[EK]5.indd 2

12/27/04 11:16:47 AM